NZXT Phantom 530 Gaming Full Tower Case
Linus Tech Tips
·Linus Tech Tips
·2015-05-07
·
1,733 words · ~8 min read
0:00
NCXT has come so far. The original
0:03
Phantom was an okay plastic case. Its
0:07
successor, the Phantom 530, is still made of plastic and still has that kind
0:12
of retro Alienwareesque look, but it is so much more than okay.
0:24
With its factory tuning and data center DNA, an Intel 730 series SSD is an
0:29
amazing choice for gamers and performance enthusiasts, which doesn't
0:33
make it immune to criticism. I'm aware of the cost benefits of using hard
0:37
packing foam, but this is how my case arrived. Hard foam is good for one solid
0:42
impact, then will be destroyed by a subsequent one. Fortunately, this one
0:46
only got hit once, so the case arrived in perfect condition. At least that hard
0:50
foam is nice and thick. The manual is pretty good and has an extremely
0:54
detailed list of all the parts included with the case and their purposes. This
0:58
is something a lot of manufacturers miss and it helps out novice builders a lot.
1:01
And I also noticed when going through the included items that it comes with a
1:04
ton of zip ties. With most manufacturers, it feels like they
1:08
include them just to make sure they can tick off the marketing bullet point.
1:12
NZXT seems to actually intend for you to cable manage your system with them.
1:15
Kudos there. External features of this case are pretty straightforward.
1:19
Aesthetically, they've updated the lines and curves in a way that I find more
1:23
pleasing. And they've added a shaped side panel window that I appreciate as
1:27
well. Functionality-wise, they've added an eighth PCI slot, and implemented
1:31
their signature rear LED illumination to make plugging things into the back much
1:36
easier. On the top, we find a 30 W fan controller, front audio, and front USB 3
1:41
ports. Then tucked away behind the solid feeling front door, we've got three five
1:46
and a quarter inch bays that use a pretty clever release lever system and a
1:50
reset switch that's both easy to get to and impossible to hit by accident.
1:55
Moving inside, sort of. Let's talk liquid cooling options. The Phantom 530
2:00
has strong water cooling support. Triple 120 or dual 140 in the top, dual 120 in
2:06
the front, dual 120 in the bottom. So, of course, I used an AIO liquid cooler
2:10
for my test build. First impressions of the rad mounting in the top were strong.
2:14
The very open mesh up here is great for air flow and an opportunity for accent
2:20
lighting with LED fans, or you can just put black in there to not draw attention
2:24
to them. Then things got a little bit rougher. The fans or the radiator need
2:29
to go in the hump up here at the top of the case to avoid clearance issues with
2:33
the motherboard, but the top bezel to access the top fans is very difficult to
2:38
remove. After some persistence and force, I got my first look at the
2:42
extremely flexible fan mounting points on the top though, and it kind of made
2:46
it worthwhile. I actually don't remember who started this trend, but using slits
2:50
instead of holes is a great inclusion for water cooling efficiados. And this
2:56
system saved my bacon here because I hate moving optical drives below the top
3:01
mounting position. So, I needed my RAD in the very, very back position at the
3:05
back of the case. Managing the radiator fan connectors down to the integrated
3:09
fan controller is a treat. NZXT strategically avoids openings in the top
3:14
of the motherboard tray where they're not needed. So, it's very clean looking
3:18
in theory. Unfortunately, the built-in fan controller, which supports 10 fans
3:23
or 30 watts max, whichever comes first, is DC only and not DC only, like four
3:30
pin PWM fans will be DC controlled, like the plugs are too close together to use
3:35
four pin fans and they physically won't fit unless you get adapters. Also, the
3:40
included extension cables would need to be chopped up to work with a four pin
3:43
fan. But don't interpret that as me hating the integrated fan controller. I
3:48
wish it was a little bit more flexible, but its weaknesses affected my build
3:52
very little. And when it is usable, it is a fantastic value ad that comes with
3:57
the case. And it gets better. I love how it and all the other front panel stuff
4:02
are pre-wired into the case and pre-cable managed. But there's even an
4:07
extra bonus. I've been saying for a long time that we should be using twist ties
4:11
instead of zip ties for cable management. It's just a little bit less
4:15
plastic to throw away every time because they're reusable. And that's exactly
4:19
what NZXT is using, which is great because unlike a zip tied method where
4:24
I'd have to cut them all, and then throw them all away, and completely reable manage it anyway when I build my system,
4:28
this way I can open them up, add a few more cables as needed, close them back
4:32
up, reroute things, and all of that without having to even break into the
4:37
zip ties that come with the case. Awesome. Speaking of cable management,
4:42
it's the strongest point of this case in my opinion. The rubber grommets
4:46
internally are improved over older designs. They're harder to accidentally
4:50
knock out when running cables through them due to
4:54
due to the deeper channels around the edges. I'm just going to keep going.
4:57
There's ample cable management for the 24 pin and more behind the mobile tray,
5:02
which is quite strong actually in spite of its oversized CPU cutout for easy
5:06
cooler installation. And then also back here we find a ton of cable loops for
5:11
pinning everything down nice and flat. And we also find what is still my
5:16
favorite system for a traymounted SSD. Corsair spring loaders are a lot faster
5:21
to use, but they just don't feel as robust, especially with slimmer drives.
5:25
Not that it really matters. SSDs aren't fragile, just a personal preference
5:28
thing. Onto the rest of the inside. The tall case feet combined with the little
5:33
support pillars that keep your power supply raised up a little bit are, in my
5:37
opinion, a great feature. It means that the PSU isn't necessarily drawing in all
5:42
fresh cool air through the filtered bottom intake, but it also can't
5:47
suffocate from being installed on a thick carpet. And as someone who
5:51
accidentally killed a power supply that way once, it's a trade-off that I'll
5:55
take. Drive mounting is great. The 5 and a/4 inch bays use a totally overbuilt
6:00
steel design. And I love the 321 hard
6:04
drive cage configuration. You can stack up from the bottom, stack down from the
6:08
top, or fill the whole thing to put in up to six drives wherever you want. Or
6:13
you can remove the bottom mounting entirely and put rads on the front and
6:16
the bottom. Very nice. Now, I don't understand though why the 3 and 1/2 in 2
6:21
and 1/2 in cages slide in from the right side. That means I have to take off both
6:26
side panels whenever I'm upgrading a drive. Now, arguably, most people will
6:31
take off both anyway since it makes cable management a lot easier. But if
6:36
I'm in a hurry, I can just run it through and not bother. And if I'm a
6:40
good builder, when I build my system in the first place, I could leave those
6:44
cables in the right place for myself. So, if I could slide the cage in from
6:47
this side, I would only have to take off one panel. Honestly though, that's one
6:52
of the only ease of use complaints I have about the case. The pre-installed
6:55
motherboard standoffs, thumb screw heavy design, and safe rounded internal
7:00
corners make the case a really, really easy one to build in. And it looks
7:04
great, too. The finish and color matching between the plastic and painted
7:08
steel has improved a lot since the first Phantom I looked at. And if I had to
7:12
complain about the looks, um, I guess
7:16
the fan mount on the side panel hurts the overall aesthetic a little bit for
7:19
me. And I don't really feel like it's going to cool these drives much better anyway. Likely it's only useful if
7:24
you've installed that weird uh hinged fan thing that's kind of like a spot
7:28
cool to point at your graphics card. Um, another thing I don't really feel like
7:32
ruining the looks of my system over. But that's about all I can find to gripe
7:36
about. So, I guess all that's left is to give this case a hearty recommendation.
7:40
The Phantom 530 is a great case. It's a bit older now, so I'm probably not the
7:45
first reviewer to come to this conclusion, but better late than never,
7:49
I hope. Right, guys? Uh, thanks for watching. Don't forget to like this
7:53
video if you liked it, dislike it if you disliked it. Leave a comment letting us know if you have any feedback on the
7:57
video or if you just did the your hatred for me or the Phantom 530 or the sound
8:03
of my voice or the way that I have two
8:06
arms that come out like this or whatever. You can leave a comment and let us know. We do actually read most of
8:10
the comments on our videos. If you want to support us, we always appreciate
8:14
that, too. There's a link in the video description. You can buy a cool t-shirt
8:17
like this one. You can change your Amazon bookmark to one that has our
8:20
affiliate code, so we get a small kickback when you buy stuff. And I'm pretty sure there's something else, too,
8:24
right? You can just contribute directly if you love what we do and you think it's great and we should keep doing it.
8:28
And I think that's pretty much it. Thank you for watching, and as always, don't forget to subscribe if you haven't
8:33
already.