Fractal Define XL R2 Quiet Computer Case Unboxing & Overview
Linus Tech Tips
·Linus Tech Tips
·2014-05-07
·
2,093 words · ~10 min read
0:00
This video is brought to you by the Intel Core i5 4670K unlocked processor.
0:05
Add an Intel 520 series SSD to your Haswell system for unbelievable overall
0:10
performance. The Fractal Design Define XL is so large that I had to No, I'm
0:16
just kidding. Actually, I raised my table a little bit. We're going to lower
0:19
that. Uh, welcome to my unboxing and first look at the Define XLR2. This case
0:23
from Fractal Design is pretty much as B-roll put it before we started. Is this
0:27
kind of like the Define R4 but bigger? And I said yes. Yes indeed. It is an XL
0:34
version of their Define series case that has that same Scandinavian clean lines
0:40
look to it. And B-roll is indicating to me that the microphone's over here.
0:44
Thank you for that. Um has that same Scandinavian clean lines look to it but
0:48
in a larger enclosure. So, this case only supports four 5 and 1/4 in bays and
0:54
eight 3 and 1/2 in or 2 and 1/2 in bays.
0:57
So, in terms of sort of mere mortal
1:01
expansion, the kind of thing most normal people would do with their systems, it
1:05
doesn't really seem to offer that much over the Define R4.
1:10
However, and there goes the chandelier. See, it is actually quite
1:16
big. There we go. However, when you get into some of the more exotic things you
1:21
might want to do with your system, like liquid cooling, for example, that is
1:24
where the XR XL really shines. So, we've
1:27
got a very hard foam here. Not my personal favorite. However, it does
1:32
compensate by at least being quite thick. So, hopefully your case won't
1:37
undergo more than one significant impact on its way to you, particularly if you
1:42
have a system built and loaded into it. So, there we go. We're done with the
1:46
packing material there. comes with a plastic sleeve over top that is of
1:50
course, and this is very important, folks, recyclable. Okay, got that
1:55
recycling logo on there on my side. You couldn't see it before, but don't worry
1:58
too much about that. All right, the case itself. So, for the sake of getting sort
2:04
of a an idea of the scale of this case, go ahead and take a step back. This is
2:08
what it looks like next to a hulking 6'4
2:12
figure of masculine unbelievably. No,
2:15
actually I'm I'm 5'6, so that should give you a better idea of how big the case actually is. So, we're going to go
2:20
ahead and peel off the front. It is available in black or titanium gray. In
2:24
terms of the door, it's pretty much what
2:28
you'll expect if you've ever seen a Defined Series case before. So, there is
2:31
noise dampening foam on the inside of the front door here that helps some of
2:36
the noise that would otherwise escape from the front be harnessed and used for
2:40
good rather than evil. We've also got toollessly removable 5 and a/4 in bay
2:44
covers. Hopefully I can. There you go. See, the thing about toolless 5 and 1/4
2:49
in bay covers is that you have to not be a tool in order to remove them and put
2:52
them back in correctly. So, if you guys uh if you guys aren't able to do it,
2:55
don't feel too bad, but you're you're a tool. Uh so, no, I'm just kidding. At
2:59
the front, we've got two 140 mm cooling fan spots with built-in filters that you
3:05
can go ahead and do that with. Okay. You
3:09
also have the option to mount 120 mm fans here using the optional holes. But
3:14
you can see that the toolless mechanism that uses clips right here to mount the
3:18
fan is only available with 140 mm fans. The case itself includes their new R2
3:24
series fans which have better bearings than the older fans. They spin at 1,000
3:28
RPM which is in line with the cool and
3:31
quiet but mostly silent, mostly quiet theme of this particular case. You can
3:36
also see that there are mounting options right here for 140 or 120 mm things from
3:43
the inside as well. More on that. Look
3:46
at this. I'm using the word tool. I'm using the word I'm not trying to
3:50
say anything about, you know, the case. Don't worry. Good case. Fractal Design
3:55
makes good stuff. I like it. All right. Up at the top of the case, two USB 2.0
4:00
ports, two USB 3.0 ports, a power button, a reset button, a headphone
4:04
jack, and a microphone jack. Also, on the top of the case, we have two modu
4:09
vents. So, these are for 140 mm fan
4:12
slots as well, and you can either leave them in for optimal silence or you can
4:16
take them out for better cooling. Also, for cooling are these vents on the
4:20
front. So, down both sides of the front of the case, there is airflow access for
4:25
that front fan because if it was up to the door, nothing would be getting
4:28
through. No window on this particular case, but we do find another modu vent.
4:33
Oh, there we go. With a 120 or 140
4:37
millimeter fan mounting option available to it, but it's screwed into the 140 mm
4:41
fan mounts. And finally, let's move around to the back where we've got
4:45
another 140 or 120 mm fan mount IO as
4:49
well as nine PCI slots. So you can fit your XLATX motherboard in there and your
4:54
firstborn child and a muffin and
4:59
probably some like cigarettes if you're trying to hide them from your family.
5:03
Not that I condone smoking. It's terrible for your computer. Never mind your lungs. I mean, it's bad for your
5:08
computer. That should be all the reason you need to stop. That tar gets into
5:12
your heat sinks and your fans and gums them up and makes it so they don't work
5:16
very well. And heaven forbid you smoke and you have pets because then you're
5:20
going to have tar and hair in your heat sinks. And let me tell you, heat sinks
5:24
don't work very well when they are full of tar and hair. Speaking of things that
5:28
are full of tar and hair, actually these are not full of tar and hair, but they are high density noise dampening pieces
5:34
that go on both the left and right side panel of this case. They increase the
5:38
weight of the case significantly, but they also make it more resistant to
5:42
noise passing through it. So, I consider that a good thing. especially given that
5:48
it's a silence optimized case, which I think I've mentioned at least a couple
5:51
times. Now, here's the other one. So, you can see that modu has a slightly
5:54
different kind of foam on it. It's a bit of a a lower density foam. So, it has
5:58
some you can press it in a little bit there, but it's thicker to compensate
6:02
because we all know, what did I say when I did my unboxing of the 900D? It's not
6:07
about the length, it's about the girth. There you go. All right. Inside the
6:10
case, we find five four five and a quarter inch bays rather and no toolless
6:15
mechanisms on them. That's kind of an interesting one. Those have been standard for a while. Personally, I
6:19
don't care. The last time I mounted something in a 5 and 1/4 in bay, it was
6:22
a gerbble and I wasn't planning to use it for anything useful cuz what can a
6:27
derbal do that's useful? Nothing. Let's go ahead and take off these. This is
6:32
what I was alluding to on the inside. So, you can go ahead and remove these
6:36
thumb screws, and that allows you to achieve something very interesting,
6:40
which I'm buying time before I get
6:44
to. Let's see if I can take this off. There we go. All right. So, you can
6:48
reposition the drive cages. So, you can open this up to get more airflow access
6:53
for your graphics cards. So, that front 140 mm fan, you can see, is right there,
6:58
and that will allow it to blow directly on your graphics cards. This also gives
7:01
you access to the Aha. Yes, those mounting points there. So, the Define
7:06
XLR2 supports a 240 or 280 mm radiator
7:10
in the front, a 240 or 280 mm radiator
7:14
up here in the top. It also supports a 120 or 140 mm radiator in the back, and
7:20
a 140 mm radiator in the bottom of the
7:23
case without much difficulty whatsoever. So, it is extremely flexible in that
7:29
regard. Radiator support on this case is
7:32
extensive. It supports a 2x1 120 mm
7:35
radiator in the front, a 2x120 or 2x40
7:39
if you're using a slim radiator in the top. It supports a single 120 or 140 mm
7:44
radiator in the back. Although I'd say 140 might be a little bit little bit
7:47
tight, but you might be able to kind of figure it out in there. And a single 120
7:51
in the bottom. However, it should be noted that in the bottom here, did I say
7:55
140? Cuz I meant 120. in the bottom here. You might have a little bit of
7:58
difficulty with that if you decide to reposition the front hard drive cage.
8:03
So, this hard drive cage, let's go ahead and close that. Can move in about this
8:07
much, giving you the ability to install thicker radiators up there, no problem.
8:12
But that will obviously interfere with this fan. And then this hard drive cage,
8:16
which I showed you before, can either be installed the way that it was out of the
8:19
box, or check this out. It can be installed this way, giving you a good
8:23
compromise between airflow
8:27
and well, basically airflow, but you
8:30
sacrifice aesthetics a little bit because instead of the hard drives plugging in in the back of the case back
8:35
here, there we go. They plug in from the inside of the case where you would be
8:39
able to see them if you had a window on the chassis, but we don't. So, not too
8:44
worried about that. Also, on the back of the case, we find lots of other things.
8:47
We've got a large CPU cutout as well as cable management holes for your 8 pin,
8:52
your, you know, I don't know, other pin, your 24 pin, your six pin, your 8 pin,
8:57
your other more different 8 pin, uh, your U front connectors. So, these are
9:01
all black cables, which is nice to see. There's your front USB, there's your
9:04
front HD audio, there's your front USB 2, as well as your power and reset. All
9:10
things that you will most assuredly need. The case does have built-in fan
9:14
control that I missed when I was at the front here because I totally forgot.
9:19
12vt, 7V, and 5V are available with
9:22
three different positions on the switch. And these can be plugged into three
9:26
separate fans. Conveniently, the case includes three fans. Boom. Mind blown.
9:31
So, you plug that in using this guy right here. So, there's Molex power for
9:36
that, as well as the four three pin connectors for the fans themselves. I
9:41
think that is pretty much going to wrap it up for the Define XLR2. Thank you for
9:46
checking out my unboxing. Let me know what you think. Would you prefer the
9:50
compact functionality of the Define R4, which is significantly smaller than this
9:55
guy, or do you prefer the largess and the flexibility to add more advanced
10:00
cooling options to the case or a longer motherboard or more graphics cards? And
10:05
would you go with something like the Define XL instead? Don't forget to
10:09
subscribe to this tech tips. Don't forget to like the video. It helps me out a whole lot. And just trying to
10:15
think. Ask them to comment. Ask them to subscribe. Ask them to
10:19
like. I could use a new hat while we're at it if that's not too much work.
10:41
Heat. Heat.