Thank you to Dbrand for making CES 2017 possible for us this year. Check them
out in the link down below. This is the Aventum 3. It is beautiful. It is huge.
Is incredibly powerful. And I'm not talking about it today. Today I'm going
to be talking about Project Medina. This is a prototype case, so it's it's not
completely ready. There's some things that will be changing. I've tried to
throw in my two cents for what they can do, and there's a couple things that
they already had on the block. In its current configuration, it has an ASUS
Z270 Stris board, an i7700 K, two GTX
1080s, 32 gigs of Corsair Dominator RAM,
some Thermaltch Ring fans, and a whole bunch of EK water cooling. But if you
don't go for like fully to the tilt builds, you can get this one down to
about 1500 or even maybe below with this same chassis. In terms of cooling all
that awesome gear, you can configure it to have up to a 3x120 or 3x140 in the
top. And in the front, you can get a 2x120 or 2x140. This current
configuration is using both. As you can see, there's already a ton of lighting
and RGB zones and all that awesomeness. But they're going to have a new lighting
controller on the way, which will add more zones, including like the digital
storm logo just on the inside of the case and I'm hoping the SSD bay in the
back and maybe even some more. We'll just have to wait and see. Speaking of
that SSD area on the right side of the case, it's an interesting idea when
compared to some people that are revealing the whole right side of the case, but then you've got some messy
cables and stuff. This just puts your beautiful SSDs on display for the world
to see. In terms of IO, on the top you have wonderful power and reset switches.
I don't know if these are Vandal switches specifically, but they feel
great. On the other side, you have a full-size SD card reader and a micro SD
card reader, which I'm sure the editors here would enjoy. Headphone and
microphone jacks, two USB 3.1 Gen1 TypeA
ports, one USB 3.1 Gen 2 TypeC ports,
those names get fairly long, and an HDMI 2.0 port if you want to plug VR headsets
up into the top instead of on the back of your case. If you are interested in
configuring your own version of Project Medina, check out Digital Storm's
website in fall of this year. Thank you to our Dank sponsor Dbrand for bringing
us to CES 2017 this year. They have a ton of different options for skins for
your devices, like my Pixel right now that has their marble skin on it. Also,
all of our laptops that we got for Christmas, all the Razer Blades, all
have different configurations of skins on there. If you want to make it your
own, similar to how you might configure one of these computers, you can go to DBR's website and configure your own
skin layout for your own device.