WEBVTT 00:00:00.160 --> 00:00:05.240 thank you to Razer for sending us to Pax West 2016 this year check out their Link 00:00:04.000 --> 00:00:09.280 in the video description down below to see the Razer Blade stealth welcome to 00:00:07.680 --> 00:00:13.320 the EVGA Booth where we're checking out the dg-87 this case tries to mix things 00:00:11.920 --> 00:00:17.199 up a bit instead of the front being right here where we're used to it being 00:00:15.040 --> 00:00:20.760 the front is here which is normally referred to as the left hand side so 00:00:19.119 --> 00:00:26.439 remember throughout this video when I'm referring to the front that's right here 00:00:23.279 --> 00:00:29.320 now for iio on the front we have two USB 00:00:26.439 --> 00:00:35.000 3.0 ports headphone and microphone jacks and HDMI pass through which you can plug 00:00:31.400 --> 00:00:37.840 into your graphics card a USB type-c 3.1 00:00:35.000 --> 00:00:43.200 connector a reset button a k boost Precision OC button which will overclock 00:00:40.239 --> 00:00:49.120 your graphics card and CPU using precision and a power button which is 00:00:45.800 --> 00:00:50.280 actually noted by the EVGA logo also on 00:00:49.120 --> 00:00:53.800 the front of the case there's a little display for your fan controller which 00:00:52.199 --> 00:00:58.920 has a mode button the mode button will change between temperature intake fans 00:00:56.719 --> 00:01:01.760 and exhaust fans and then depending on what mode you're in the the 00:01:00.160 --> 00:01:06.240 functionality of the arrow keys will change so if you're in exhaust or intake 00:01:04.000 --> 00:01:11.119 fan mode you can change the power going to the fans from 5% all the way up to 00:01:08.720 --> 00:01:15.159 100% now the windowed side panel can be removed by pressing in on this lever and 00:01:13.560 --> 00:01:19.240 then if you want to fully take it off cuz you want to work on the build and just don't want to worry about it for a 00:01:17.360 --> 00:01:22.680 little while you can press this lever in and then pull the rail down although I'm 00:01:21.200 --> 00:01:27.200 not going to do it right now because it would fall out and I don't have two hands to catch it the left hand side of 00:01:26.000 --> 00:01:32.360 the computer is where you can access your motherboard IO so you do that by pressing down the opposite lever for 00:01:30.600 --> 00:01:39.159 opening the door and then what is revealed here as well is two individual 00:01:35.119 --> 00:01:41.600 120 or 140 mm fan slots you cannot 00:01:39.159 --> 00:01:45.119 without some type of modding remove this panel and join them together and even if 00:01:43.240 --> 00:01:52.119 you did the spacing would be incorrect for a dual Rad but you could install a 00:01:47.680 --> 00:01:53.360 120 or 140 mm radiator here for your CPU 00:01:52.119 --> 00:01:58.600 removing the grill on the right hand side of the computer can be done by pressing in until you hear an audible 00:01:56.320 --> 00:02:02.680 click letting go and then pulling the fan filter away which can also be 00:02:00.240 --> 00:02:09.560 removed just by sliding it down now this is compatible with up to 4X 120 mm fan 00:02:05.759 --> 00:02:11.160 radiator or a 3x1 40 mm fan radiator the 00:02:09.560 --> 00:02:14.800 back of the case reveals the cable routing for your motherboard and 00:02:12.599 --> 00:02:18.440 expansion card slots and then if you pull up on this lever you can reveal the 00:02:16.840 --> 00:02:24.120 back of the motherboard tray where we can see a large cutout for mounting CPU 00:02:21.080 --> 00:02:27.160 coolers four different SSD trays which 00:02:24.120 --> 00:02:30.080 can hold one SSD each and then two bays 00:02:27.160 --> 00:02:34.040 of 3x 3 and 1 half inch Drive trays and then two individual spots for 3 and 1 00:02:32.319 --> 00:02:37.440 half in drives as well now the cable management that is currently displayed 00:02:35.680 --> 00:02:41.080 back here is really not that great but I'd take that with a grain of salt there 00:02:39.360 --> 00:02:45.200 are quite a few different places where you can manage your cables including 00:02:58.840 --> 00:03:03.840 pre-institutional ities through the front of the case which should make your 00:03:02.200 --> 00:03:08.120 cables nice and pretty they're really soft so shouldn't look too weird when 00:03:05.959 --> 00:03:11.200 you run cables through them a couple additional things to note basically 00:03:09.599 --> 00:03:15.319 everything has filters on it the right hand side the Le hand side the top even 00:03:13.480 --> 00:03:19.200 the power supply which I'll remove and show you right here but it should be 00:03:16.879 --> 00:03:22.440 noted that the top is a little bit difficult to access you have to remove 00:03:20.640 --> 00:03:25.760 the fans that are on the inside and remove all the side panels and 00:03:23.720 --> 00:03:30.159 everything in order to get to that filter another thing to note is that 00:03:27.920 --> 00:03:36.560 while we're showing off the dg-87 right now there actually Four models there's 00:03:31.959 --> 00:03:38.319 the dg-87 dg-86 dg85 and DG 84 and then 00:03:36.560 --> 00:03:42.640 the DG 84 is the most significant difference having no window here and no 00:03:40.319 --> 00:03:45.439 fan controller or display down on the front as well although that is all the 00:03:44.400 --> 00:03:50.879 way down to $149 compared to the 229 of this unit 00:03:49.040 --> 00:03:56.400 we're looking at right now we also checked out the EVGA power link which is 00:03:53.000 --> 00:03:58.480 an aesthetic accessory for EVGA 1070s or 00:03:56.400 --> 00:04:02.560 1080s which makes your power routing look really cool essentially you can 00:04:00.159 --> 00:04:06.239 plug the power supply cables into it instead of the graphics card which 00:04:04.239 --> 00:04:09.799 should remove some cable clutter from the nicely viewable part of your case 00:04:08.799 --> 00:04:14.920 what do you guys think let me know in the comments down below also thank you to Razer for sending us to PA West 2016 00:04:13.599 --> 00:04:21.680 this year check out the link in the video description down below to enter a giveaway for the new razor blade which 00:04:19.120 --> 00:04:25.759 is configured by me also the new razor blade stealth which is configured by me 00:04:23.600 --> 00:04:29.400 as well and then has some really cool custom art on it from edel Yago so check 00:04:28.000 --> 00:04:32.880 that out video description down below thank you Razer for sending us here stay 00:04:31.120 --> 00:04:37.479 subscribe to L SE for all of our PA West 2016 content and I'll see you guys next 00:04:34.840 --> 00:04:37.479 time