thank you to Razer for sending us to Pax West 2016 this year check out their Link
in the video description down below to see the Razer Blade stealth welcome to
the EVGA Booth where we're checking out the dg-87 this case tries to mix things
up a bit instead of the front being right here where we're used to it being
the front is here which is normally referred to as the left hand side so
remember throughout this video when I'm referring to the front that's right here
now for iio on the front we have two USB
3.0 ports headphone and microphone jacks and HDMI pass through which you can plug
into your graphics card a USB type-c 3.1
connector a reset button a k boost Precision OC button which will overclock
your graphics card and CPU using precision and a power button which is
actually noted by the EVGA logo also on
the front of the case there's a little display for your fan controller which
has a mode button the mode button will change between temperature intake fans
and exhaust fans and then depending on what mode you're in the the
functionality of the arrow keys will change so if you're in exhaust or intake
fan mode you can change the power going to the fans from 5% all the way up to
100% now the windowed side panel can be removed by pressing in on this lever and
then if you want to fully take it off cuz you want to work on the build and just don't want to worry about it for a
little while you can press this lever in and then pull the rail down although I'm
not going to do it right now because it would fall out and I don't have two hands to catch it the left hand side of
the computer is where you can access your motherboard IO so you do that by pressing down the opposite lever for
opening the door and then what is revealed here as well is two individual
120 or 140 mm fan slots you cannot
without some type of modding remove this panel and join them together and even if
you did the spacing would be incorrect for a dual Rad but you could install a
120 or 140 mm radiator here for your CPU
removing the grill on the right hand side of the computer can be done by pressing in until you hear an audible
click letting go and then pulling the fan filter away which can also be
removed just by sliding it down now this is compatible with up to 4X 120 mm fan
radiator or a 3x1 40 mm fan radiator the
back of the case reveals the cable routing for your motherboard and
expansion card slots and then if you pull up on this lever you can reveal the
back of the motherboard tray where we can see a large cutout for mounting CPU
coolers four different SSD trays which
can hold one SSD each and then two bays
of 3x 3 and 1 half inch Drive trays and then two individual spots for 3 and 1
half in drives as well now the cable management that is currently displayed
back here is really not that great but I'd take that with a grain of salt there
are quite a few different places where you can manage your cables including
pre-institutional ities through the front of the case which should make your
cables nice and pretty they're really soft so shouldn't look too weird when
you run cables through them a couple additional things to note basically
everything has filters on it the right hand side the Le hand side the top even
the power supply which I'll remove and show you right here but it should be
noted that the top is a little bit difficult to access you have to remove
the fans that are on the inside and remove all the side panels and
everything in order to get to that filter another thing to note is that
while we're showing off the dg-87 right now there actually Four models there's
the dg-87 dg-86 dg85 and DG 84 and then
the DG 84 is the most significant difference having no window here and no
fan controller or display down on the front as well although that is all the
way down to $149 compared to the 229 of this unit
we're looking at right now we also checked out the EVGA power link which is
an aesthetic accessory for EVGA 1070s or
1080s which makes your power routing look really cool essentially you can
plug the power supply cables into it instead of the graphics card which
should remove some cable clutter from the nicely viewable part of your case
what do you guys think let me know in the comments down below also thank you to Razer for sending us to PA West 2016
this year check out the link in the video description down below to enter a giveaway for the new razor blade which
is configured by me also the new razor blade stealth which is configured by me
as well and then has some really cool custom art on it from edel Yago so check
that out video description down below thank you Razer for sending us here stay
subscribe to L SE for all of our PA West 2016 content and I'll see you guys next
time