1
00:00:00,240 --> 00:00:05,799
welcome to the Fallout build log it was

2
00:00:03,240 --> 00:00:09,599
said to not be possible to fit a computer into the bomb that comes with

3
00:00:08,000 --> 00:00:15,280
the Fallout Anthology but with determination and a really good 3D

4
00:00:12,000 --> 00:00:15,280
printer we're going to make it

5
00:00:22,199 --> 00:00:29,320
work the master case 5 by Cooler Master gives you the freedom to truly make your

6
00:00:26,960 --> 00:00:32,800
midtower PC case your own with a variety of modular parts and accessories check

7
00:00:31,400 --> 00:00:37,760
out the link in the video description down below to learn more all right so

8
00:00:35,399 --> 00:00:42,480
this isn't a normal build log as you can probably tell this isn't a normal case

9
00:00:40,440 --> 00:00:46,079
uh with a normal case you can check what it's compatible with and just order

10
00:00:44,280 --> 00:00:49,879
things that it's compatible with and put them in and everything's fine this is

11
00:00:47,920 --> 00:00:53,559
obviously not naturally compatible with anything so there had to be some

12
00:00:51,840 --> 00:00:58,359
feasibility testing I've already kind of planned out the parts I've got a Maximus

13
00:00:55,480 --> 00:01:01,960
impact 8 I've got a tiny little sfx power supply from Silverstone this is a

14
00:00:59,960 --> 00:01:08,640
300 WT trying to get a 450 more about that later I've got an R9 Fury Nano I

15
00:01:05,119 --> 00:01:11,880
have some lowprofile Vengeance lpx I've

16
00:01:08,640 --> 00:01:13,439
got an SSD uh Riser cable we'll talk

17
00:01:11,880 --> 00:01:18,680
about that stuff later I've done some planning but one problem is part of that

18
00:01:16,040 --> 00:01:24,759
planning involved being like well damn this thing is definitely too small if

19
00:01:20,720 --> 00:01:27,520
you look at it the usable space is Tiny

20
00:01:24,759 --> 00:01:32,280
it's not that big and a lot of its curves which are not that usable for

21
00:01:29,320 --> 00:01:38,320
computer parts which are very much boxy so it needed to be extended I worked

22
00:01:35,759 --> 00:01:43,119
with Taran and we 3D modeled some stuff so we did some test things first

23
00:01:40,600 --> 00:01:47,119
surprisingly and awesomely Tan's first one actually fit quite well we did some

24
00:01:45,240 --> 00:01:52,119
minor changes to the fit and added some fitting tabs for These Foo screws that

25
00:01:49,240 --> 00:01:57,880
are on the side also worked quite well so we moved on to the jumbo the big guy

26
00:01:55,600 --> 00:02:03,200
this one actually makes it tall enough that I can fit all of my stuff

27
00:02:00,479 --> 00:02:09,360
now when looking at this it maybe doesn't look the greatest you might be

28
00:02:05,360 --> 00:02:10,319
like but Luke it's lime green the rest

29
00:02:09,360 --> 00:02:14,160
of it's not it's okay we'll get more to that

30
00:02:12,560 --> 00:02:18,760
later I'm going to try to get some colorcoded spray bombs which actually

31
00:02:16,400 --> 00:02:23,239
like match the green and the brown speckle that's already on here so we'll

32
00:02:21,200 --> 00:02:27,680
we'll touch up the aesthetic there but for the rest of the build there's some

33
00:02:25,040 --> 00:02:30,480
plans but not all of them is planned and you guys are going to have to come along

34
00:02:28,640 --> 00:02:34,040
with me for that so with this build there has to be a

35
00:02:31,879 --> 00:02:37,680
balance between badassery and functionality and one of the most

36
00:02:35,640 --> 00:02:44,360
important things in my opinion with this build to do with badassery is this

37
00:02:40,360 --> 00:02:44,360
button when you press this button right

38
00:02:46,440 --> 00:02:52,319
now awesome super FY that's great but I

39
00:02:50,120 --> 00:02:56,400
want this button to also turn on the computer I could have hooked it in and

40
00:02:54,040 --> 00:02:59,879
parallel onto the power switchy thing using this and stuff but there's some

41
00:02:58,080 --> 00:03:04,280
voltage problems or something I'm not super great with electronics so I'm

42
00:03:01,680 --> 00:03:09,200
going to solder in another switch how this thing works is it's a big plate

43
00:03:06,840 --> 00:03:12,560
that presses down onto another plate which has a button mounted in it so what

44
00:03:11,040 --> 00:03:17,120
I'm going to try to do is add another button so that this plate press down

45
00:03:14,159 --> 00:03:20,200
actually presses two buttons now I don't actually have another one of these spare

46
00:03:18,560 --> 00:03:27,280
switches that's where

47
00:03:22,799 --> 00:03:30,439
this hunk of junk comes in so this guy

48
00:03:27,280 --> 00:03:34,319
up at the top I found has

49
00:03:30,439 --> 00:03:37,480
very usable little tiny switch so I'm

50
00:03:34,319 --> 00:03:39,799
going to drill the rivets out rip this

51
00:03:37,480 --> 00:03:44,400
thing out separate it from these wires cut that

52
00:03:40,959 --> 00:03:46,360
off tear it out mount it into that plate

53
00:03:44,400 --> 00:03:52,480
solder it into the thing and then hopefully it

54
00:03:48,400 --> 00:03:54,879
works I might just break it oh yes I

55
00:03:52,480 --> 00:04:02,319
will just break it so it's actually just this module right here that I need

56
00:04:02,319 --> 00:04:06,919
it's okay you're probably editing

57
00:04:07,720 --> 00:04:14,079
this okay I think that opened it up for

58
00:04:10,840 --> 00:04:17,199
me there we

59
00:04:14,079 --> 00:04:19,280
go well I'm salvaging this computer case

60
00:04:17,199 --> 00:04:24,199
I'm ripping out its switch and I'm using it for something else so if that's not

61
00:04:21,400 --> 00:04:29,000
Fallout I don't know what it is I just need two of the wires and I only need

62
00:04:26,600 --> 00:04:32,560
the ones that go to the actual switch itself one thing that's really cool that

63
00:04:30,720 --> 00:04:37,000
I got for this build is this tiny little lowprofile SATA cable although the SATA

64
00:04:35,400 --> 00:04:44,039
connections on this board are right next to the RAM so it's kind of a problem but

65
00:04:39,560 --> 00:04:46,400
if I put it in the bottom slot down here

66
00:04:44,039 --> 00:04:51,800
and just kind of work the cable around the bottom of the RAM but above the PCI

67
00:04:49,440 --> 00:04:59,039
Express slot I can kind of make it come out just fine so this will work for my

68
00:04:57,000 --> 00:05:03,039
SSD okay so I'm just testing to make sure that the system actually works so

69
00:05:01,039 --> 00:05:08,440
this is the mess of components that I have to get inside of the

70
00:05:05,479 --> 00:05:11,520
bomb we got post code nope there we go okay so I don't have a keyboard or

71
00:05:09,520 --> 00:05:17,600
anything installed but as you guys can see on the monitor honestly that's good

72
00:05:14,840 --> 00:05:25,039
enough the system works so moving on I need to turn this off then I need to

73
00:05:20,400 --> 00:05:28,400
wrap um my switches things around these

74
00:05:25,039 --> 00:05:30,680
poles maybe I can't wrap it around can I

75
00:05:28,400 --> 00:05:36,600
get a Helper go hey

76
00:05:33,520 --> 00:05:38,840
hey okay so now I need to solder this in

77
00:05:36,600 --> 00:05:43,520
place so it's not just held by me thank you helper Colton you can go back to

78
00:05:40,840 --> 00:05:47,880
doing whatever you're doing and we're good to go theoretically it works so now

79
00:05:45,800 --> 00:05:53,319
as long as I don't massively screw up everything by my terrible soldering job

80
00:05:51,039 --> 00:05:53,319
we're

81
00:05:54,600 --> 00:06:01,880
good okay so my horrible horrible horrible horrible horrible soldering job

82
00:05:59,000 --> 00:06:05,919
is done going to turn the power supply on doesn't automatically turn on that's

83
00:06:04,280 --> 00:06:12,319
a good thing press the button yes okay the button works I need

84
00:06:09,880 --> 00:06:16,560
to find a way to mount this little box on the plastic plate that is already in

85
00:06:14,360 --> 00:06:21,520
there and already has one switch need to add another one God I'm happy that

86
00:06:19,000 --> 00:06:26,599
worked this one has a lot more travel time than this one does this one's a

87
00:06:23,319 --> 00:06:28,919
very shallow press also the button

88
00:06:26,599 --> 00:06:34,199
swivels on a fix point on the bottom I would like to mount this as high as

89
00:06:31,039 --> 00:06:36,960
possible but there's stuff blocking a

90
00:06:34,199 --> 00:06:40,800
tall mount in here the ideal location is where this random kind of plus symbol

91
00:06:39,080 --> 00:06:46,479
post is so I'm going to have to try to remove that and then drill through it

92
00:06:42,720 --> 00:06:46,479
and see if I can mount something right

93
00:06:46,759 --> 00:06:52,360
there might not want to show that it's

94
00:06:50,039 --> 00:06:59,080
like not a proper way to use a drill just so Taran knows I'm just going to

95
00:06:55,080 --> 00:07:00,360
hold my switch in the hole that I cut

96
00:06:59,080 --> 00:07:04,080
for it this represents if I like hot glued it

97
00:07:02,639 --> 00:07:07,080
in or something

98
00:07:09,120 --> 00:07:12,879
okay that did not

99
00:07:17,800 --> 00:07:25,639
work so it it works if you press like super deep I need to make the hole

100
00:07:22,879 --> 00:07:30,759
bigger there is not that much time between now and when Fallout 4 comes out

101
00:07:28,000 --> 00:07:35,120
if anything goes wrong I'm screwed and I'm doing a lot of things in this Build

102
00:07:32,879 --> 00:07:37,400
That Could completely screw the entire build

103
00:07:37,720 --> 00:07:43,400
over I hope this switch

104
00:07:43,400 --> 00:07:48,919
works all right guys we're back in the office now one of the problems with

105
00:07:46,879 --> 00:07:52,520
painting this is that the surface is very different than the surface of the

106
00:07:50,479 --> 00:07:57,080
bomb the surface of the bomb is super smooth this guy has flat walls because

107
00:07:55,039 --> 00:08:00,759
it's a 3D printer and it was printing kind of with some flat walls so I need

108
00:07:59,280 --> 00:08:08,919
to sand that down so it's a little bit more smooth this is going to take a little while so super speed time lapse

109
00:08:08,919 --> 00:08:13,159
engage I'm just going to tie a shirt on my

110
00:08:14,039 --> 00:08:19,919
face okay so it's largely sanded down

111
00:08:17,879 --> 00:08:24,720
this is filler primer so hopefully that will help kind of fill in some of the

112
00:08:21,879 --> 00:08:30,199
grooves that are still existing and we can get going one of the problems is is

113
00:08:26,960 --> 00:08:33,120
that the clearances on these things

114
00:08:30,199 --> 00:08:39,120
are actually pretty tight so I'm going to try to tape them off and then we'll

115
00:08:35,360 --> 00:08:42,200
be good to start spraying I've never

116
00:08:39,120 --> 00:08:45,160
spray primered anything

117
00:08:42,200 --> 00:08:56,210
before let's hope I don't super suck that would be a huge waste of

118
00:08:58,320 --> 00:09:03,430
time wa what do you think any

119
00:09:10,240 --> 00:09:16,440
problems that's a lot smoother I can already tell so we're going to bring

120
00:09:14,920 --> 00:09:23,480
this into dry again then we might do it one more time so through the combined efforts of

121
00:09:20,360 --> 00:09:26,040
my triangle file and my large flat file

122
00:09:23,480 --> 00:09:30,440
I was able to open up that circular hole that I had drilled and make a square

123
00:09:28,240 --> 00:09:34,880
hole and the switch fit through I need to secure it got some hot glue that

124
00:09:32,200 --> 00:09:40,000
should be fine but there's one problem that remains it has to be so far out

125
00:09:37,200 --> 00:09:45,120
that I can't actually slide it in because it will interfere with the rim

126
00:09:42,240 --> 00:09:49,160
of the bomb so I have to actually take it

127
00:09:45,920 --> 00:09:52,760
out and then put the switch plate back

128
00:09:49,160 --> 00:09:55,120
in all the way and then fit it in why

129
00:09:52,760 --> 00:10:01,120
this is a problem is I have to hot glue it in a

130
00:09:57,320 --> 00:10:02,959
position that I can't can't take it out

131
00:10:01,120 --> 00:10:08,120
and that sucks that's super sketchy but anyways let's give it a

132
00:10:04,560 --> 00:10:09,880
shot don't touch it oh yeah that's

133
00:10:08,120 --> 00:10:14,720
drives pretty fast though thankfully okay so everything's put

134
00:10:13,079 --> 00:10:20,980
together if it doesn't work I'm going to pull my freaking hair out let's try

135
00:10:21,480 --> 00:10:30,279
it it made the noise the computer turned on we're good to go moving on to other

136
00:10:27,279 --> 00:10:30,279
things

137
00:10:34,720 --> 00:10:41,720
all right guys this is primer coat number three it's starting to come along

138
00:10:39,760 --> 00:10:52,000
um we might do one or two

139
00:10:52,000 --> 00:10:57,279
more another problem to be solved the

140
00:10:55,320 --> 00:11:02,079
power supply of this rig will be going into the top of the bomb up here I need

141
00:11:00,040 --> 00:11:06,120
you to be able to plug into it into the bottom of the bomb so I need to create

142
00:11:04,120 --> 00:11:10,480
an extension so I needed a right angle connector with a favorable Inlet so what

143
00:11:08,639 --> 00:11:15,720
I did was I grabbed a right angle cable and I cut it in half without the camera

144
00:11:12,959 --> 00:11:19,320
being turned on and then the plan is to strip off the end of this splice out the

145
00:11:17,360 --> 00:11:23,720
wires solder the wires into this guy Mount this guy into the bottom of the

146
00:11:20,760 --> 00:11:26,800
case plug this into the power supply and voila so here we

147
00:11:27,240 --> 00:11:32,839
go okay so connection one is done just

148
00:11:30,480 --> 00:11:37,639
like my other jobs little sloppy but it'll

149
00:11:35,120 --> 00:11:42,680
do wow that one was like probably my best one okay so I've electrical taped

150
00:11:40,240 --> 00:11:47,959
up my little thingy that I soldered together here so hopefully that looks

151
00:11:45,120 --> 00:11:54,120
better for one and hopefully it works that's what we're going to test

152
00:11:49,639 --> 00:11:54,120
now and with a whole lot of

153
00:11:55,920 --> 00:12:00,240
Hope and it works

154
00:12:01,959 --> 00:12:10,120
I was a little worried about that

155
00:12:05,240 --> 00:12:12,440
okay okay okay okay moving on all

156
00:12:10,120 --> 00:12:17,839
right all right this is our fourth and final coat of primer then we have to do

157
00:12:15,199 --> 00:12:17,839
a layer of

158
00:12:24,720 --> 00:12:30,399
black so I spray painted a bug onto the primer

159
00:12:34,639 --> 00:12:41,320
okay so it's all primed we're ready to start painting um as with basically

160
00:12:39,320 --> 00:12:46,560
everything else in this project I have no idea what I'm doing um but we're

161
00:12:43,800 --> 00:12:50,360
going to start with black so this guy is black I believe lonus does know what

162
00:12:48,639 --> 00:12:55,760
he's doing when it comes to the paint stuff but and he was supposed to show me

163
00:12:53,519 --> 00:13:01,320
but he had to leave important business of some sort or something or other

164
00:12:58,000 --> 00:13:04,120
whatever uh um so yeah he's not here so

165
00:13:01,320 --> 00:13:04,120
we're just going to wing

166
00:13:07,480 --> 00:13:15,120
it that's probably way more black paint than I

167
00:13:12,240 --> 00:13:19,220
need but as I have no idea we're going to go with

168
00:13:19,760 --> 00:13:26,199
that now lus said to roll down on this

169
00:13:24,120 --> 00:13:31,760
thing towards the paint after dipping it in the paint for 2 minutes um um but I'm

170
00:13:29,920 --> 00:13:35,720
kind of assuming that he was exaggerating a little bit cuz he thought

171
00:13:33,360 --> 00:13:38,680
I wouldn't actually do it I'm just going to go for like a

172
00:13:44,680 --> 00:13:51,440
while okay you have to look at this so I

173
00:13:48,360 --> 00:13:52,839
just shoved two Ryobi batteries inside

174
00:13:51,440 --> 00:13:59,240
of the thing so that it wouldn't move when I press paint on it and they

175
00:13:55,240 --> 00:13:59,240
fit perfectly

176
00:14:01,519 --> 00:14:10,749
so I think the 2 minutes of squeezing the paint out of it was a huge

177
00:14:11,600 --> 00:14:17,380
exaggeration oh my God why is this so

178
00:14:14,800 --> 00:14:20,040
bad and what is that

179
00:14:20,040 --> 00:14:26,560
pattern when you take all the paint out of the brush you need a lot of pressure

180
00:14:24,680 --> 00:14:30,199
behind it apparently so that's why it didn't work right away

181
00:14:31,279 --> 00:14:39,040
Logitech has been in the headphone game for a really long time and it shows with

182
00:14:35,440 --> 00:14:41,959
the g633 emis Spectrum headset the g633

183
00:14:39,040 --> 00:14:47,279
is equipped with logitech's 40 mm proog audio drivers 7.1 Dolby Surround Sound

184
00:14:44,759 --> 00:14:51,240
with Logitech gaming software a cardioid boom mic which hides away very nicely

185
00:14:49,199 --> 00:14:55,079
actually fully adjustable RGB lighting and custom tags they're available from a

186
00:14:53,440 --> 00:15:00,600
variety of retailers now including Amazon will be a great holiday gift for

187
00:14:57,440 --> 00:15:01,880
your PC Xbox or PS4 Gamers or just a

188
00:15:00,600 --> 00:15:06,240
great pick up for yourself if you're looking for a new headset check them out in the link in the video description

189
00:15:04,320 --> 00:15:12,079
down below okay so our first coat of black is

190
00:15:09,120 --> 00:15:16,120
done honestly it looks pretty okay there's definitely definitely areas

191
00:15:14,519 --> 00:15:20,680
where it needs more paint so we will definitely definitely have to do another

192
00:15:18,240 --> 00:15:24,040
coat but for now we're going to let it dry so I'm going to take it inside so

193
00:15:22,079 --> 00:15:29,480
there's a little bit of a warmer climate at this time of night in the unheated

194
00:15:26,120 --> 00:15:31,759
Warehouse it's like borderline too cold

195
00:15:29,480 --> 00:15:38,000
to even be painting so I need to take it into the office so that it can actually

196
00:15:33,399 --> 00:15:38,000
kind of warm up so that it can

197
00:15:39,639 --> 00:15:43,639
dry okay