WEBVTT 00:00:00.000 --> 00:00:05.040 What is up people of Floatplane? I hope you guys are stoked for LTX this week. As you may or may 00:00:05.040 --> 00:00:10.880 not know, we have a build your own screwdriver booth happening at LTX for both days where you 00:00:10.880 --> 00:00:17.600 could build your very own custom LTT screwdriver. Did I mention we have eight different colors? 00:00:17.600 --> 00:00:22.240 This is just some of them. We only managed to get five samples of selectors. The rest are at our 00:00:22.240 --> 00:00:28.800 warehouse getting ready to be delivered, but it'll be end caps, accent rings, selectors and 00:00:28.880 --> 00:00:34.080 handles, eight different colors. And we invited some people from around the office to show us how 00:00:34.080 --> 00:00:41.040 to build it. Okay, teach us how to do it. It's gonna be a slightly different setup at the booth. 00:00:41.040 --> 00:00:46.480 So your first step in building your own screwdriver is choosing your actual parts. So what we have 00:00:46.480 --> 00:00:51.440 right here is all the parts laid out. Like I said, we have a couple samples. So all the colors will 00:00:51.440 --> 00:00:56.160 be available at LTX, but right now we are in here with a subset of it. So you would choose 00:00:56.160 --> 00:01:01.040 your handle, your ratchet assembly, your accent ring, and your end cap. And then we'll give and 00:01:01.040 --> 00:01:06.000 then we'll also give you a couple of generic parts, right? So right now we're in there and can choose 00:01:06.000 --> 00:01:11.520 their parts. Well, I get the generic parts that you'll get in every single kit. I would pick this one. 00:01:12.240 --> 00:01:19.760 I guess this one. I give it like a Christmas style. Christmas style. Like I said, very samples. 00:01:19.760 --> 00:01:25.600 Wait, that's the only one that has this thing? Yeah. So because they were in the middle of 00:01:25.600 --> 00:01:30.400 manufacturing when I got these samples, these are all the quality rejects. This is too big. 00:01:30.400 --> 00:01:38.000 Yeah. So these are all the quality rejects where there's like tiny little gas marks that 00:01:38.000 --> 00:01:42.640 wouldn't really make it into production. These parts would actually be regrounded and reused. 00:01:42.640 --> 00:01:49.440 But because this is just for filming and we want just to film before it's out, we have samples. 00:01:49.760 --> 00:01:55.840 Okay. So we just pick this four. Yes. Four parts. Yes. Four parts. Okay. Right. And then I will give 00:01:55.840 --> 00:02:02.560 you two other parts that you need to build it. And that's one times assembled bit, half bit clip. 00:02:02.560 --> 00:02:07.520 And the tainting pin. That's what makes the click sound when you close it. It's not magnetic. A lot 00:02:07.520 --> 00:02:12.320 of people think it's magnetic. I thought it was magnetic. It's not magnetic. It's purely mechanical. 00:02:12.960 --> 00:02:17.120 What? Yeah. A lot of people are surprised by that. So what did you choose, Dennis? 00:02:17.120 --> 00:02:25.680 I chose the, well, red one to go with the big size handle to match kind of like, you know, 00:02:26.720 --> 00:02:31.520 Christmas color. Okay. I guess it's gonna Christmas. Okay. I mean, 00:02:36.160 --> 00:02:42.160 anyways, I like this one. It is a good color blue. Yeah. Electric blue. That's mine. Okay. 00:02:42.720 --> 00:02:46.800 Wait, what else? You also chose? No, it's okay. And this is the ring. The ring goes out with this 00:02:46.800 --> 00:02:51.760 color, like the bottom part, right? You want it to be magic. But unfortunately, we don't have the 00:02:51.760 --> 00:02:54.800 color. Yeah, you just have purple. Otherwise, I would go with 00:02:57.840 --> 00:03:04.880 yellow. Yeah. Yeah. I don't like purple. Yeah. And it's just, there's no color. Yeah. So 00:03:05.600 --> 00:03:12.000 everybody's kit, once they're done choosing, we'll have a handle, an end cap, a bit clip 00:03:12.000 --> 00:03:18.320 sub assembly, an accent ring, a ratchet assembly, and the tainting pin. After you've selected your 00:03:18.320 --> 00:03:24.400 parts, you will go to three stations in order and assemble a third of the screwdriver on each 00:03:24.400 --> 00:03:29.280 station, right? And by the end, you will have a completed screwdriver. Now I'll be showing Dennis 00:03:29.280 --> 00:03:35.120 how to make a completed bit clip assembly with end cap installed. So the first thing you're going to do 00:03:35.760 --> 00:03:41.520 is grab our tainting pin. And on the first station, there'll be a bucket of super glue. 00:03:42.560 --> 00:03:51.360 The reason for this, it's not locked. What? I did not do that. So you need to, you need to, 00:03:51.360 --> 00:03:58.640 do it up. Oh my goodness, dude. It's too loose. Why would it happen without the, like, 00:03:58.640 --> 00:04:04.640 wouldn't we be able to insert? No, you would. And you'll put the tainting pin inside the tube. 00:04:04.640 --> 00:04:10.000 Oh my God, that looks so easy. Yes. Because you have lube. So you did, you're done. Yes. And now 00:04:10.000 --> 00:04:18.000 you put that inside the holder. And start now. Okay. All right. Yeah. And then all you need to do 00:04:18.000 --> 00:04:24.800 is put the cap, the cap on top and leave it there. And then pull the lever until you hear the click. 00:04:24.880 --> 00:04:30.320 Slowly. Oh, and then take it out. 00:04:32.720 --> 00:04:36.880 Now we're going to assemble the last three pieces together on the next step. 00:04:37.680 --> 00:04:44.240 Let's move over. Slide your head down one step. Now at LTX, these are going to be at different 00:04:44.240 --> 00:04:50.880 tables. So we will have four stations of the bit clip assembler at one table. 00:04:55.360 --> 00:04:59.200 We have four of these at one station. And then station two will be the station and there'll be 00:04:59.200 --> 00:05:04.320 four of them. And there'll be four of the final step as well. So don't worry about throughput. 00:05:04.320 --> 00:05:09.440 You've got your cupboard. But right now, yeah, you put that back in the box. And you want to grab 00:05:09.440 --> 00:05:15.360 the remaining three pieces, that, that and that. Okay. And we'll put the box over there. And now 00:05:15.360 --> 00:05:21.440 we're going to attach the handle, the accent ring, and the ratchet assembly together. This is a very 00:05:21.440 --> 00:05:26.160 easy step to forget. You need to put the accent ring on first. Okay, there's a nice little indent 00:05:26.160 --> 00:05:32.720 over there where it fits. See, it holds it very nicely. Now the cool thing about this is our 00:05:32.720 --> 00:05:40.320 ratchet assembly is keyed. There is a thicker key and a thinner one. And there is a matching 00:05:40.320 --> 00:05:45.360 thicker and thinner key on the handle. So what happens is that just slides in there. And as 00:05:45.360 --> 00:05:50.880 soon as, as soon as you see the keys line up, you're done. And all you do is you pop it in there. 00:05:51.520 --> 00:05:56.080 And if you want to do it slowly until it seats in the bottom, you won't hear a kick this time. 00:05:58.160 --> 00:06:04.400 Yep, keep going. You might need some force. Okay, that's enough. That's it. Okay. And you can take 00:06:04.400 --> 00:06:12.560 it out. Wow. And now you should be able to ratchet it and it should work. Yeah. Okay, now all you have 00:06:12.560 --> 00:06:18.880 to do is put these two pieces together. And it's as simple as drop it on. And it won't go any further 00:06:18.880 --> 00:06:25.680 because the tain pin is actually needs to go over those bob fittings. Oh, right. So we just put 00:06:25.680 --> 00:06:33.920 that over there. And we slide this in there. Oh, and then push down again. Yep. What? That's simple. 00:06:34.960 --> 00:06:42.720 And now you have... That's a screwdriver. It's as simple as that. Then you get your bits. And I 00:06:42.720 --> 00:06:47.200 don't feel like doing this. You can put your bits in. This is boring. You know how to put this in. 00:06:47.200 --> 00:06:52.080 Let's cut to the B-roll. Pretend it's beautiful. So what's the inspiration behind yours, Dennis? 00:06:56.400 --> 00:07:03.440 Well, I didn't get to pick the color of this. Yeah. So I'm more excited to build a new one at 00:07:03.440 --> 00:07:07.520 OTX because I don't like purple. If we don't sell a lot of purple, I'm just going to blame Dennis. 00:07:08.480 --> 00:07:14.800 It's actually a nice color. All right. Now, Maria. Yay, my turn. I'm sure you can make a better 00:07:14.800 --> 00:07:21.680 one with that. Oh. Color wise, yes. Maria, why don't you talk us through the inspiration and the colors? 00:07:22.320 --> 00:07:28.880 My inspiration was the Teclyn color black hoodie, which is like exactly these colors. 00:07:30.160 --> 00:07:37.040 And I love colorful stuff, like products. So you have electric... Different colors for everything. 00:07:37.040 --> 00:07:43.360 So we need to assemble these three pieces together and gently put some glue on the inside of the 00:07:44.160 --> 00:07:49.760 the tube hole. This is going to enable the bit, the taining pin to slide smoothly between the tube 00:07:49.760 --> 00:07:54.160 when you open it. We're going to put the end cap on, slide it in. It doesn't matter. There is not 00:07:54.160 --> 00:07:59.200 straight. What happens when the arbor press comes down, it'll straighten up for you. It doesn't need 00:07:59.200 --> 00:08:03.360 to be straight when you put it on. It's two bumps that go over each other and then like interface 00:08:03.360 --> 00:08:09.520 together. So it's a very self-aligning like press fit once it's done. So it doesn't need to be 00:08:09.520 --> 00:08:13.440 perfectly horizontal, but just over there. Okay. And then all you need to do is pull the lever 00:08:13.440 --> 00:08:19.360 slowly until you have a kick and you can take it out. Then all you need to do is pop the ratcheting 00:08:19.360 --> 00:08:25.040 and slightly push it down until the key is engaged and then pull the handle. Now this one requires 00:08:25.040 --> 00:08:31.600 a little bit of force and you're done. I say that as Maria, just like one time. Okay. You can take it 00:08:31.600 --> 00:08:39.120 out now. So that's two thirds of the drive assembled. Now all that's left is to attach these two pieces. 00:08:39.120 --> 00:08:43.040 So all that we need to do is pop it on, slide it in the remaining arbor press, 00:08:43.040 --> 00:08:49.840 and then just push down until it closes. Yep. And you can take it out. 00:08:51.840 --> 00:09:00.880 And there is a color block screwdriver. Yay. Tackling. Tackling. The first pull is a bit 00:09:00.880 --> 00:09:06.240 rough just to get the lube all spread around the tube. Once it actually, once you open it a couple 00:09:06.240 --> 00:09:14.240 times, it breaks in. It's kind of by design. Oh, I love it. How do you feel it turned out? 00:09:14.240 --> 00:09:18.400 I love it. I really, really love it. I think it makes good contrast between the colors. 00:09:19.680 --> 00:09:22.560 Very happy with my color screwdriver.