1
00:00:00,000 --> 00:00:05,040
What is up people of Floatplane? I hope you guys are stoked for LTX this week. As you may or may

2
00:00:05,040 --> 00:00:10,880
not know, we have a build your own screwdriver booth happening at LTX for both days where you

3
00:00:10,880 --> 00:00:17,600
could build your very own custom LTT screwdriver. Did I mention we have eight different colors?

4
00:00:17,600 --> 00:00:22,240
This is just some of them. We only managed to get five samples of selectors. The rest are at our

5
00:00:22,240 --> 00:00:28,800
warehouse getting ready to be delivered, but it'll be end caps, accent rings, selectors and

6
00:00:28,880 --> 00:00:34,080
handles, eight different colors. And we invited some people from around the office to show us how

7
00:00:34,080 --> 00:00:41,040
to build it. Okay, teach us how to do it. It's gonna be a slightly different setup at the booth.

8
00:00:41,040 --> 00:00:46,480
So your first step in building your own screwdriver is choosing your actual parts. So what we have

9
00:00:46,480 --> 00:00:51,440
right here is all the parts laid out. Like I said, we have a couple samples. So all the colors will

10
00:00:51,440 --> 00:00:56,160
be available at LTX, but right now we are in here with a subset of it. So you would choose

11
00:00:56,160 --> 00:01:01,040
your handle, your ratchet assembly, your accent ring, and your end cap. And then we'll give and

12
00:01:01,040 --> 00:01:06,000
then we'll also give you a couple of generic parts, right? So right now we're in there and can choose

13
00:01:06,000 --> 00:01:11,520
their parts. Well, I get the generic parts that you'll get in every single kit. I would pick this one.

14
00:01:12,240 --> 00:01:19,760
I guess this one. I give it like a Christmas style. Christmas style. Like I said, very samples.

15
00:01:19,760 --> 00:01:25,600
Wait, that's the only one that has this thing? Yeah. So because they were in the middle of

16
00:01:25,600 --> 00:01:30,400
manufacturing when I got these samples, these are all the quality rejects. This is too big.

17
00:01:30,400 --> 00:01:38,000
Yeah. So these are all the quality rejects where there's like tiny little gas marks that

18
00:01:38,000 --> 00:01:42,640
wouldn't really make it into production. These parts would actually be regrounded and reused.

19
00:01:42,640 --> 00:01:49,440
But because this is just for filming and we want just to film before it's out, we have samples.

20
00:01:49,760 --> 00:01:55,840
Okay. So we just pick this four. Yes. Four parts. Yes. Four parts. Okay. Right. And then I will give

21
00:01:55,840 --> 00:02:02,560
you two other parts that you need to build it. And that's one times assembled bit, half bit clip.

22
00:02:02,560 --> 00:02:07,520
And the tainting pin. That's what makes the click sound when you close it. It's not magnetic. A lot

23
00:02:07,520 --> 00:02:12,320
of people think it's magnetic. I thought it was magnetic. It's not magnetic. It's purely mechanical.

24
00:02:12,960 --> 00:02:17,120
What? Yeah. A lot of people are surprised by that. So what did you choose, Dennis?

25
00:02:17,120 --> 00:02:25,680
I chose the, well, red one to go with the big size handle to match kind of like, you know,

26
00:02:26,720 --> 00:02:31,520
Christmas color. Okay. I guess it's gonna Christmas. Okay. I mean,

27
00:02:36,160 --> 00:02:42,160
anyways, I like this one. It is a good color blue. Yeah. Electric blue. That's mine. Okay.

28
00:02:42,720 --> 00:02:46,800
Wait, what else? You also chose? No, it's okay. And this is the ring. The ring goes out with this

29
00:02:46,800 --> 00:02:51,760
color, like the bottom part, right? You want it to be magic. But unfortunately, we don't have the

30
00:02:51,760 --> 00:02:54,800
color. Yeah, you just have purple. Otherwise, I would go with

31
00:02:57,840 --> 00:03:04,880
yellow. Yeah. Yeah. I don't like purple. Yeah. And it's just, there's no color. Yeah. So

32
00:03:05,600 --> 00:03:12,000
everybody's kit, once they're done choosing, we'll have a handle, an end cap, a bit clip

33
00:03:12,000 --> 00:03:18,320
sub assembly, an accent ring, a ratchet assembly, and the tainting pin. After you've selected your

34
00:03:18,320 --> 00:03:24,400
parts, you will go to three stations in order and assemble a third of the screwdriver on each

35
00:03:24,400 --> 00:03:29,280
station, right? And by the end, you will have a completed screwdriver. Now I'll be showing Dennis

36
00:03:29,280 --> 00:03:35,120
how to make a completed bit clip assembly with end cap installed. So the first thing you're going to do

37
00:03:35,760 --> 00:03:41,520
is grab our tainting pin. And on the first station, there'll be a bucket of super glue.

38
00:03:42,560 --> 00:03:51,360
The reason for this, it's not locked. What? I did not do that. So you need to, you need to,

39
00:03:51,360 --> 00:03:58,640
do it up. Oh my goodness, dude. It's too loose. Why would it happen without the, like,

40
00:03:58,640 --> 00:04:04,640
wouldn't we be able to insert? No, you would. And you'll put the tainting pin inside the tube.

41
00:04:04,640 --> 00:04:10,000
Oh my God, that looks so easy. Yes. Because you have lube. So you did, you're done. Yes. And now

42
00:04:10,000 --> 00:04:18,000
you put that inside the holder. And start now. Okay. All right. Yeah. And then all you need to do

43
00:04:18,000 --> 00:04:24,800
is put the cap, the cap on top and leave it there. And then pull the lever until you hear the click.

44
00:04:24,880 --> 00:04:30,320
Slowly. Oh, and then take it out.

45
00:04:32,720 --> 00:04:36,880
Now we're going to assemble the last three pieces together on the next step.

46
00:04:37,680 --> 00:04:44,240
Let's move over. Slide your head down one step. Now at LTX, these are going to be at different

47
00:04:44,240 --> 00:04:50,880
tables. So we will have four stations of the bit clip assembler at one table.

48
00:04:55,360 --> 00:04:59,200
We have four of these at one station. And then station two will be the station and there'll be

49
00:04:59,200 --> 00:05:04,320
four of them. And there'll be four of the final step as well. So don't worry about throughput.

50
00:05:04,320 --> 00:05:09,440
You've got your cupboard. But right now, yeah, you put that back in the box. And you want to grab

51
00:05:09,440 --> 00:05:15,360
the remaining three pieces, that, that and that. Okay. And we'll put the box over there. And now

52
00:05:15,360 --> 00:05:21,440
we're going to attach the handle, the accent ring, and the ratchet assembly together. This is a very

53
00:05:21,440 --> 00:05:26,160
easy step to forget. You need to put the accent ring on first. Okay, there's a nice little indent

54
00:05:26,160 --> 00:05:32,720
over there where it fits. See, it holds it very nicely. Now the cool thing about this is our

55
00:05:32,720 --> 00:05:40,320
ratchet assembly is keyed. There is a thicker key and a thinner one. And there is a matching

56
00:05:40,320 --> 00:05:45,360
thicker and thinner key on the handle. So what happens is that just slides in there. And as

57
00:05:45,360 --> 00:05:50,880
soon as, as soon as you see the keys line up, you're done. And all you do is you pop it in there.

58
00:05:51,520 --> 00:05:56,080
And if you want to do it slowly until it seats in the bottom, you won't hear a kick this time.

59
00:05:58,160 --> 00:06:04,400
Yep, keep going. You might need some force. Okay, that's enough. That's it. Okay. And you can take

60
00:06:04,400 --> 00:06:12,560
it out. Wow. And now you should be able to ratchet it and it should work. Yeah. Okay, now all you have

61
00:06:12,560 --> 00:06:18,880
to do is put these two pieces together. And it's as simple as drop it on. And it won't go any further

62
00:06:18,880 --> 00:06:25,680
because the tain pin is actually needs to go over those bob fittings. Oh, right. So we just put

63
00:06:25,680 --> 00:06:33,920
that over there. And we slide this in there. Oh, and then push down again. Yep. What? That's simple.

64
00:06:34,960 --> 00:06:42,720
And now you have... That's a screwdriver. It's as simple as that. Then you get your bits. And I

65
00:06:42,720 --> 00:06:47,200
don't feel like doing this. You can put your bits in. This is boring. You know how to put this in.

66
00:06:47,200 --> 00:06:52,080
Let's cut to the B-roll. Pretend it's beautiful. So what's the inspiration behind yours, Dennis?

67
00:06:56,400 --> 00:07:03,440
Well, I didn't get to pick the color of this. Yeah. So I'm more excited to build a new one at

68
00:07:03,440 --> 00:07:07,520
OTX because I don't like purple. If we don't sell a lot of purple, I'm just going to blame Dennis.

69
00:07:08,480 --> 00:07:14,800
It's actually a nice color. All right. Now, Maria. Yay, my turn. I'm sure you can make a better

70
00:07:14,800 --> 00:07:21,680
one with that. Oh. Color wise, yes. Maria, why don't you talk us through the inspiration and the colors?

71
00:07:22,320 --> 00:07:28,880
My inspiration was the Teclyn color black hoodie, which is like exactly these colors.

72
00:07:30,160 --> 00:07:37,040
And I love colorful stuff, like products. So you have electric... Different colors for everything.

73
00:07:37,040 --> 00:07:43,360
So we need to assemble these three pieces together and gently put some glue on the inside of the

74
00:07:44,160 --> 00:07:49,760
the tube hole. This is going to enable the bit, the taining pin to slide smoothly between the tube

75
00:07:49,760 --> 00:07:54,160
when you open it. We're going to put the end cap on, slide it in. It doesn't matter. There is not

76
00:07:54,160 --> 00:07:59,200
straight. What happens when the arbor press comes down, it'll straighten up for you. It doesn't need

77
00:07:59,200 --> 00:08:03,360
to be straight when you put it on. It's two bumps that go over each other and then like interface

78
00:08:03,360 --> 00:08:09,520
together. So it's a very self-aligning like press fit once it's done. So it doesn't need to be

79
00:08:09,520 --> 00:08:13,440
perfectly horizontal, but just over there. Okay. And then all you need to do is pull the lever

80
00:08:13,440 --> 00:08:19,360
slowly until you have a kick and you can take it out. Then all you need to do is pop the ratcheting

81
00:08:19,360 --> 00:08:25,040
and slightly push it down until the key is engaged and then pull the handle. Now this one requires

82
00:08:25,040 --> 00:08:31,600
a little bit of force and you're done. I say that as Maria, just like one time. Okay. You can take it

83
00:08:31,600 --> 00:08:39,120
out now. So that's two thirds of the drive assembled. Now all that's left is to attach these two pieces.

84
00:08:39,120 --> 00:08:43,040
So all that we need to do is pop it on, slide it in the remaining arbor press,

85
00:08:43,040 --> 00:08:49,840
and then just push down until it closes. Yep. And you can take it out.

86
00:08:51,840 --> 00:09:00,880
And there is a color block screwdriver. Yay. Tackling. Tackling. The first pull is a bit

87
00:09:00,880 --> 00:09:06,240
rough just to get the lube all spread around the tube. Once it actually, once you open it a couple

88
00:09:06,240 --> 00:09:14,240
times, it breaks in. It's kind of by design. Oh, I love it. How do you feel it turned out?

89
00:09:14,240 --> 00:09:18,400
I love it. I really, really love it. I think it makes good contrast between the colors.

90
00:09:19,680 --> 00:09:22,560
Very happy with my color screwdriver.