1
00:00:00,000 --> 00:00:06,260
Titan we have a thing for you. Oh, really? Open it up. Oh, that's got some weight

2
00:00:09,860 --> 00:00:13,900
LTT and Nice, okay

3
00:00:14,220 --> 00:00:20,540
Well before we get to that Just a small bag of machine parts. Holy moly

4
00:00:23,540 --> 00:00:25,860
It's like a solid machined brass

5
00:00:26,860 --> 00:00:30,500
Shaft Thank goodness. All right, I'm just gonna

6
00:00:33,900 --> 00:00:40,220
Holy moly. Now do you have more of an idea of what's going on here? Yeah, I have a pretty pretty good idea at this point

7
00:00:40,740 --> 00:00:47,220
certainly Some nice machining work from whoever put this together and some ever so slightly destroyed

8
00:00:47,620 --> 00:00:52,100
components from our driver which fair enough in 3d printed parts a

9
00:00:53,220 --> 00:00:56,580
bunch of internal components Oh

10
00:00:56,580 --> 00:01:01,420
Some attempts for a bit holder and end cap sub assembly

11
00:01:02,260 --> 00:01:06,820
Including some nice machining grooves My guess is an attempt at an end cap

12
00:01:07,540 --> 00:01:12,660
Solidly machined on a lathe. It's pretty good. Although parting that off would be an adventure

13
00:01:13,180 --> 00:01:16,060
Well speaking of parting it off there would be another attempt

14
00:01:16,620 --> 00:01:21,340
Whoever this is was definitely able to figure out most of the important components of it and at least

15
00:01:21,940 --> 00:01:26,260
Seems to be doing a fairly good job of replicating a good number of them

16
00:01:26,260 --> 00:01:31,740
If you open up the screwdriver box, you'll also find some more notes from whoever sent me

17
00:01:36,900 --> 00:01:41,420
It's fine, it's fine. Everything is fine. Jeez. This is heavy too. Ah

18
00:01:43,660 --> 00:01:48,460
All right. Well, so we got some nice Karen handling instructions. We all know what to do with this

19
00:01:49,220 --> 00:01:54,020
Oh my god, but not actually. This is one of the times I will actually read it through. Oh

20
00:01:56,220 --> 00:01:58,220
Okay

21
00:02:02,700 --> 00:02:04,700
Lots of pieces of paper

22
00:02:05,900 --> 00:02:13,340
This machinist did some brass plating of some stainless steel to get the stiffness that they wanted while also getting the look that

23
00:02:13,340 --> 00:02:18,460
I'm assuming they were going for which is Pretty cool does look like they have

24
00:02:20,060 --> 00:02:24,500
At least to some extent or another reverse engineered the ratchet. Let's give it an open

25
00:02:27,260 --> 00:02:32,020
So the first one that comes up oh my gosh is

26
00:02:32,420 --> 00:02:36,220
The solid brass version

27
00:02:36,220 --> 00:02:44,860
It does work This is the coated section that they were talking about where they mentioned to not polish it too much as the coating may come off over time

28
00:02:45,940 --> 00:02:52,180
How's that ratchet feel? I mean not as good, but it's it's got a click to it for sure. It feels it's

29
00:02:53,500 --> 00:02:55,900
It's a lot finer of a ratchet

30
00:02:57,740 --> 00:02:59,740
Like the steps are smaller

31
00:03:01,180 --> 00:03:06,620
But it it finds up a little bit just one off tolerances

32
00:03:07,380 --> 00:03:09,380
This

33
00:03:12,420 --> 00:03:15,620
This is monstrously heavy brass is a very heavy metal and this

34
00:03:16,980 --> 00:03:19,740
This thing is a is a bludgeoning weapon for sure

35
00:03:20,260 --> 00:03:23,500
Jeez, but what are your overall thoughts? Oh, it's super cool

36
00:03:23,900 --> 00:03:27,500
The lack of the bit clip is a bit sad, but that is

37
00:03:28,340 --> 00:03:31,060
Legitimately quite hard to do the second reveal. Oh

38
00:03:32,660 --> 00:03:34,660
Oh geez

39
00:03:36,620 --> 00:03:38,620
I see a separate piece

40
00:03:39,980 --> 00:03:44,700
It's a little hard to open up. Okay They did it on this one

41
00:03:44,780 --> 00:03:46,780
That's pretty impressive

42
00:03:48,260 --> 00:03:51,860
The mirror the mirror finish on it is pretty spectacular as well

43
00:03:51,860 --> 00:03:55,940
I think they reused one of our shafts, but gave it a mirror polish

44
00:04:00,180 --> 00:04:05,940
Yes, although not recommended it can be fully disassembled please contact for disassembly instructions

45
00:04:07,620 --> 00:04:14,740
So, yeah, this would be at least some of the internal components of our driver based on that. Oh, the end caps hard to open

46
00:04:19,340 --> 00:04:24,440
Aha Okay, so they have a slightly different mechanism in the back as well

47
00:04:24,660 --> 00:04:29,820
Unlike our driver which uses a piece of injection molded plastic in a spring to hold the bit clip in

48
00:04:30,700 --> 00:04:36,260
They used a magnet and a piece of steel. It's very clever and it works really well

49
00:04:36,620 --> 00:04:39,660
Also simplifies not having an injection molding shop in your backyard

50
00:04:40,620 --> 00:04:44,060
How's it compared to your metal screwdriver here?

51
00:04:46,060 --> 00:04:50,940
It's a lot this is a lot heavier. I have a feeling a good chunk of the inside of this is

52
00:04:51,820 --> 00:04:57,500
Actually, I think this entire thing might just be stainless. Yeah, so I suspect this entire driver is stainless steel

53
00:04:57,500 --> 00:05:01,340
Whereas a good chunk of this is made out of aluminum with some brass

54
00:05:02,220 --> 00:05:08,780
so this is probably Two to three times heavier than this metal driver

55
00:05:09,100 --> 00:05:15,340
Which is again like two times heavier than our normal driver, but this is a this is a work of art

56
00:05:16,060 --> 00:05:21,820
For sure me and the engineering team are looking forward to taking it apart and seeing how they made all of these work

57
00:05:22,300 --> 00:05:26,780
100% going to contact for disassembly. I am far too curious to not

58
00:05:29,900 --> 00:05:34,860
Currently I think this one is Cooler that being said if I took both of them apart

59
00:05:35,180 --> 00:05:37,740
I have a feeling my opinion would change and I'd want to see

60
00:05:38,540 --> 00:05:43,740
This more I suspect this would be cooler because it seems as though they've reworked

61
00:05:44,460 --> 00:05:48,620
More of the overall mechanism whereas this was trying to

62
00:05:48,860 --> 00:05:54,060
Take our design and give it a reskin. These were sent to us by I apologize in advance

63
00:05:57,420 --> 00:06:00,540
But these are fantastic and And

64
00:06:00,540 --> 00:06:04,540
Yeah, I look forward to being able to take either or both of these apart if it's possible

65
00:06:04,940 --> 00:06:08,700
We're here with the engineering team to unbox this fun little ticket

66
00:06:13,100 --> 00:06:17,260
Perhaps Oh, it's heavy. It's very heavy

67
00:06:20,220 --> 00:06:22,220
That one's stainless the ratchet size

68
00:06:23,260 --> 00:06:26,140
The two ratchets are very different. It's way too good to fit on this

69
00:06:26,620 --> 00:06:30,300
Air pressure as I push it in. I wasn't expecting the notches to go in

70
00:06:32,380 --> 00:06:36,700
And they're sharp also How does it screw on?

71
00:06:36,700 --> 00:06:38,700
Yeah

72
00:06:39,820 --> 00:06:44,140
Speaking of real fine threads It's almost playing with magnets in the end cap. That's

73
00:06:45,020 --> 00:06:50,940
Yep Yep, so that's how they close it down. They say uh contact us for breakdown instructions

74
00:06:51,740 --> 00:06:55,900
So I will be doing that shortly I want to see the insides of these

75
00:06:57,100 --> 00:07:01,420
It's not consistent They did say that

76
00:07:01,420 --> 00:07:03,420
It was a manufacturing defect

77
00:07:04,460 --> 00:07:11,420
Which fair enough you've already compared it to ours, right? Yeah. Yeah. Yeah. Is this a soft closing bit storage?

78
00:07:15,500 --> 00:07:18,860
It's like soft closing girls on a car air pressure. Yeah. Yeah, pretty much

79
00:07:20,300 --> 00:07:27,260
My intrusive You could yeah, you could definitely hurt something. I did the same thing. I'm like, oh boy. This thing is

80
00:07:27,820 --> 00:07:31,260
Such a freaking weapon. You think this is game pass tsa? No