WEBVTT 00:00:00.000 --> 00:00:05.040 What is up people of Floatplane? I hope you guys are stoked for LTX this week. As you may or may 00:00:05.040 --> 00:00:10.880 not know, we have a build your own screwdriver booth happening at LTX for both days where you 00:00:10.880 --> 00:00:17.600 could build your very own custom LTT screwdriver. Did I mention we have eight different colors? 00:00:17.600 --> 00:00:22.240 This is just some of them. We only managed to get five samples of selectors. The rest are at our 00:00:22.240 --> 00:00:28.800 warehouse getting ready to be delivered, but it'll be end caps, accent rings, selectors and 00:00:28.880 --> 00:00:34.080 handles, eight different colors. And we invited some people from around the office to show us how 00:00:34.080 --> 00:00:41.040 to build it. Okay, teach us how to do it. It's gonna be a slightly different setup at the booth. 00:00:41.040 --> 00:00:46.480 So your first step in building your own screwdriver is choosing your actual parts. So what we have 00:00:46.480 --> 00:00:51.440 right here is all the parts laid out. Like I said, we have a couple samples. So all the colors will 00:00:51.440 --> 00:00:56.160 be available at LTX, but right now we are in here with a subset of it. So you would choose 00:00:56.160 --> 00:01:01.040 your handle, your ratchet assembly, your accent ring, and your end cap. And then we'll give and 00:01:01.040 --> 00:01:06.000 then we'll also give you a couple of generic parts, right? So right now we're in there and can choose 00:01:06.000 --> 00:01:11.520 their parts. Well, I get the generic parts that you'll get in every single kit. I would pick this one. 00:01:12.240 --> 00:01:19.760 I guess this one. I give it like a Christmas style. Christmas style. Like I said, very samples. 00:01:19.760 --> 00:01:25.600 Wait, that's the only one that has this thing? Yeah. So because they were in the middle of 00:01:25.600 --> 00:01:30.400 manufacturing when I got these samples, these are all the quality rejects. This is too big. 00:01:30.400 --> 00:01:38.000 Yeah. So these are all the quality rejects where there's like tiny little gas marks that 00:01:38.000 --> 00:01:42.640 wouldn't really make it into production. These parts would actually be regrounded and reused. 00:01:42.640 --> 00:01:49.440 But because this is just for filming and we want just to film before it's out, we have samples. 00:01:49.760 --> 00:01:55.840 Okay. So we just pick this four. Yes. Four parts. Yes. Four parts. Okay. Right. And then I will give 00:01:55.840 --> 00:02:02.560 you two other parts that you need to build it. And that's one times assembled bit, half bit clip. 00:02:02.560 --> 00:02:07.520 And the tainting pin. That's what makes the click sound when you close it. It's not magnetic. A lot 00:02:07.520 --> 00:02:12.320 of people think it's magnetic. I thought it was magnetic. It's not magnetic. It's purely mechanical. 00:02:12.960 --> 00:02:17.120 What? Yeah. A lot of people are surprised by that. So what did you choose, Dennis? 00:02:17.120 --> 00:02:25.680 I chose the, well, red one to go with the big size handle to match kind of like, you know, 00:02:26.720 --> 00:02:31.520 Christmas color. Okay. I guess it's gonna Christmas. Okay. I mean, 00:02:36.160 --> 00:02:42.160 anyways, I like this one. It is a good color blue. Yeah. Electric blue. That's mine. Okay. 00:02:42.720 --> 00:02:46.800 Wait, what else? You also chose? No, it's okay. And this is the ring. The ring goes out with this 00:02:46.800 --> 00:02:51.760 color, like the bottom part, right? You want it to be magic. But unfortunately, we don't have the 00:02:51.760 --> 00:02:54.800 color. Yeah, you just have purple. Otherwise, I would go with 00:02:57.840 --> 00:03:04.880 yellow. Yeah. Yeah. I don't like purple. Yeah. And it's just, there's no color. Yeah. So 00:03:05.600 --> 00:03:12.000 everybody's kit, once they're done choosing, we'll have a handle, an end cap, a bit clip 00:03:12.000 --> 00:03:18.320 sub assembly, an accent ring, a ratchet assembly, and the tainting pin. After you've selected your 00:03:18.320 --> 00:03:24.400 parts, you will go to three stations in order and assemble a third of the screwdriver on each 00:03:24.400 --> 00:03:29.280 station, right? And by the end, you will have a completed screwdriver. Now I'll be showing Dennis 00:03:29.280 --> 00:03:35.120 how to make a completed bit clip assembly with end cap installed. So the first thing you're going to do 00:03:35.760 --> 00:03:41.520 is grab our tainting pin. And on the first station, there'll be a bucket of super glue. 00:03:42.560 --> 00:03:50.640 The reason for this, I didn't start laughing. What? I didn't have that. No be it up. No be it up. 00:03:50.640 --> 00:03:57.760 You need to. No be it up. Oh my goodness, dude. It's too loose. Why would it happen without the 00:03:57.840 --> 00:04:03.920 loop? Like wouldn't we be able to insert it? No, you would. And you'll put the tainting pin inside 00:04:03.920 --> 00:04:09.600 the tube. Oh my god, that looks so easy. Yes, because you have a loop. So you did, done. Yes. 00:04:09.600 --> 00:04:17.360 And now you put that inside the holder. And start now. Okay. All right. Yeah. And then all you need 00:04:17.360 --> 00:04:23.920 to do is put the cap, the cap on top and leave it there. And then pull the lever until you hear 00:04:23.920 --> 00:04:34.880 the click slowly. Oh, and then take it out. Now we're going to assemble the last three pieces 00:04:34.880 --> 00:04:43.040 together on the next step. Let's move over, slide your head down one step. Now at LTX, these are 00:04:43.040 --> 00:04:50.480 going to be at different tables. So we will have four stations of the bit clip assembler at one table. 00:04:54.880 --> 00:04:58.800 We have four of these at one station. And then station two will be the station and there'll be 00:04:58.800 --> 00:05:03.920 four of them. And there'll be four of the final step as well. So don't worry about throughput. 00:05:03.920 --> 00:05:09.040 You've got your cupboard. But right now, yeah, you put that back in the box. And you want to grab 00:05:09.040 --> 00:05:14.960 the remaining three pieces, that that and that. Okay. And we'll put the box over there. And now 00:05:14.960 --> 00:05:21.040 we're going to attach the handle, the accent ring, and the ratchet assembly together. This is a very 00:05:21.120 --> 00:05:25.760 easy step to forget. You need to put the accent ring on first. Okay, there's a nice little indent 00:05:25.760 --> 00:05:32.400 over there where it fits. See, it holds it very nicely. Now, the cool thing about this is our 00:05:32.400 --> 00:05:39.920 ratchet assembly is keyed. There is a thicker key and a thinner one. And there is a matching 00:05:39.920 --> 00:05:44.960 thicker and thinner key on the handle. So what happens is that just slides in there. And as 00:05:44.960 --> 00:05:50.480 soon as as soon as you see the keys line up, you're done. And all you do is you pop it in there. 00:05:51.200 --> 00:05:55.680 And if you want to do it slowly until it seats in the bottom, you won't hear a click this time. 00:05:57.760 --> 00:05:59.680 Yep, keep going. You might need some force. 00:06:01.120 --> 00:06:06.320 Okay, that's enough. That's it. Okay, and you can take it out. Wow. And now you should be able 00:06:06.320 --> 00:06:13.680 to ratchet it and it should work. Yeah. Okay, now, all you have to do is put these two pieces 00:06:13.680 --> 00:06:20.640 together. And it's as simple as drop it on. And it won't go any further, because the tain pin 00:06:20.720 --> 00:06:26.720 actually needs to go over those bob fittings. Oh, my. So we just put that over there. And we 00:06:26.720 --> 00:06:35.440 slide this in there. Oh, and then push down again. Yep. What? That's simple. And now you have 00:06:38.320 --> 00:06:42.960 that's a screwdriver. It's as simple as that. Then you get your bits. And I don't feel like doing 00:06:42.960 --> 00:06:47.520 this. You can put your bits in. This is boring. You know how to put this in. That's cut to the 00:06:47.520 --> 00:06:51.760 bureau. Pretend it's beautiful. So what's the inspiration behind yours, Dennis? 00:06:56.000 --> 00:06:58.960 Well, I didn't get to pick the color of this. Yeah. So 00:07:00.800 --> 00:07:05.840 I'm more excited to build a new one at OTX, because I don't like purple. If we don't sell a lot of 00:07:05.840 --> 00:07:11.680 purple, I'm just going to blame Dennis. It's actually a nice color. All right. Now, Maria. 00:07:11.680 --> 00:07:15.040 Yay, my turn. I'm sure you can make a better one with that. 00:07:17.680 --> 00:07:21.360 Color wise, yes. Maria, why don't you talk us through the inspiration and the colors? 00:07:21.920 --> 00:07:28.560 My inspiration was the Teclyn color black hoodie, which is like exactly these colors. 00:07:29.760 --> 00:07:35.680 And I love colorful stuff like products. So yeah, you have electric. Different colors for 00:07:35.680 --> 00:07:42.240 everything. So we need to assemble these three pieces together and gently put some glue on the 00:07:42.240 --> 00:07:49.040 inside of the tube hole. This is going to enable the bit, the tainting pin to slide smoothly between 00:07:49.040 --> 00:07:53.600 the tube when you open it. We're going to put the end cap on, slide it in. It doesn't matter. There is 00:07:53.600 --> 00:07:58.400 not straight. What happens when the arbor press comes down, it will straighten up for you. It 00:07:58.400 --> 00:08:02.240 doesn't need to be straight when you put it on. It's two bumps that go over each other and then 00:08:02.480 --> 00:08:08.720 interface together. So it's a very self-aligning press fit once it's done. So it doesn't need 00:08:08.720 --> 00:08:13.040 to be perfectly horizontal, but just over there. And then all you need to do is pull the lever 00:08:13.040 --> 00:08:19.040 slowly until you have a kick and you can take it out. Then all you need to do is pop the ratcheting 00:08:19.040 --> 00:08:24.720 and slightly push it down until the key is engaged and then pull the handle. Now, this one requires 00:08:24.720 --> 00:08:31.280 a little bit of force and you're done. I say that as Maria just like one time. Okay. You can take it 00:08:31.280 --> 00:08:37.680 out now. So that's two thirds of the driver assembled. Now all that's left is to attach 00:08:37.680 --> 00:08:42.640 these two pieces. So all we need to do is pop it on, slide it in the remaining arbor press, 00:08:42.640 --> 00:08:49.440 and then just push down until it closes. Yep, and you can take it out. 00:08:51.520 --> 00:08:59.920 And there is a color block screwdriver. Yeah, technically, technique. The first pull is always 00:08:59.920 --> 00:09:05.920 a bit rough just to get the lube all spread around the tube. Once you open it a couple 00:09:05.920 --> 00:09:13.840 times, it breaks in. It's kind of by design. Oh, I love it. How do you feel it turned out? 00:09:13.840 --> 00:09:18.000 I love it. I really, really love it. I think it makes good contrast between the colors. 00:09:19.280 --> 00:09:22.160 Very happy with my color screwdriver.