WEBVTT

00:00:00.160 --> 00:00:05.520
welcome to the ultimaker booth we are checking out the ultimaker 2 extended

00:00:04.040 --> 00:00:11.160
plus there's some pretty cool new features here mainly the new orientation

00:00:08.240 --> 00:00:15.360
of the fans the exchangeable print heads and the new feeder thanks to Squarespace

00:00:13.240 --> 00:00:19.080
for sending us here to CES 2016 this year their link is in the description

00:00:16.800 --> 00:00:22.480
down below starting with the print head ultimaker worked with the guys in the

00:00:20.840 --> 00:00:30.679
community that made the Olsen block so it's an exchangeable print head that goes from 0.25 to4 6 and then up to8 if

00:00:28.439 --> 00:00:33.960
you use much smaller filament material you can make something that's much finer

00:00:32.200 --> 00:00:37.920
more detailed print but it will take you a lot longer and vice versa s for the

00:00:36.360 --> 00:00:41.960
large stuff it'll take you less amount of time but it won't look quite as good

00:00:40.320 --> 00:00:46.079
on the topic of print quality we have the orientation of the fans this doesn't

00:00:43.760 --> 00:00:51.079
seem like a huge deal but changing how the fans are oriented allowed them to

00:00:48.160 --> 00:00:55.359
push a lot more airflow through which actually makes a huge deal and is allows

00:00:53.239 --> 00:00:58.800
you to make higher quality prints not just it's not that just things cool down

00:00:57.359 --> 00:01:02.920
a little bit faster it's that you're able to do more detail operations with

00:01:00.760 --> 00:01:07.400
the printer which is super important and the next main point is the new feeder

00:01:04.640 --> 00:01:11.159
it's much larger in overall format size than the previous feeder which actually

00:01:09.600 --> 00:01:15.600
makes a ton of sense a problem with the previous feeder was that the motor would

00:01:13.080 --> 00:01:20.119
make the gears too hot which would make the plastic too hot which was a problem

00:01:18.439 --> 00:01:24.079
now not only are the gears made out of nylon so they don't transfer heat that

00:01:22.280 --> 00:01:27.799
much but they're also a little bit further away from the motor so that heat

00:01:25.600 --> 00:01:31.560
transfer shouldn't be as big of a deal also very cool side note there's now a

00:01:30.000 --> 00:01:36.040
switch on the side of the feeder which allows you to disengage the gear

00:01:33.640 --> 00:01:40.799
allowing you to manually pull out the print filament which is great another

00:01:38.680 --> 00:01:44.479
random tidbit side note thing is that the little white bit of plastic I don't

00:01:42.600 --> 00:01:49.240
really remember the name of its job that it does but it sits in between the hot

00:01:46.560 --> 00:01:52.759
and cold zones on the actual printer it has had a durability increase which is

00:01:51.280 --> 00:01:56.719
great because when you're sitting in between a hot and cold Zone braking is

00:01:54.880 --> 00:02:00.560
going to definitely be a huge problem now are you sad because you have an

00:01:58.360 --> 00:02:04.039
ultimaker 2 or ultimaker 2 extended and you want the plus features but you don't

00:02:02.520 --> 00:02:08.440
want to buy any one cuz they're super expensive that's okay no launch date yet

00:02:06.520 --> 00:02:13.840
but they will be releasing ultimaker plus ultimaker 2 plus kits so you can

00:02:11.640 --> 00:02:17.360
upgrade your current kit to that it's not going to be the easiest thing to do

00:02:16.200 --> 00:02:22.200
but you might be able to take it to a center or something like that if you're worried about your

00:02:20.280 --> 00:02:25.519
abilities anyways guys thanks for watching this video I was super excited

00:02:23.840 --> 00:02:30.160
to check this stuff out I love my 3D printer so yeah I was very happy that

00:02:28.319 --> 00:02:34.280
this was here anyways come in the comments down below if you would buy a

00:02:31.800 --> 00:02:37.239
kit if you owned an ultimaker 2 or just don't that's also fine thanks to

00:02:35.840 --> 00:02:40.760
Squarespace for sending us here this year to CES 2016 check out their Link in

00:02:39.720 --> 00:02:46.120
the video description down below squarespace.com also add a/ Linus to the

00:02:43.800 --> 00:02:49.840
end and use the offer code Linus win purchasing your first purchase will be

00:02:47.920 --> 00:02:52.959
10% off if you buy a year at a time you get a free domain it's actually really

00:02:51.560 --> 00:02:56.200
easy to use if you have any problems with it they have 24/7 live chat and

00:02:54.800 --> 00:03:01.680
email support and they have a whole bunch of templates so you can make it look really pretty even if you're not

00:02:59.280 --> 00:03:07.599
very good at that whole aesthetic stuff anyways Squarespace build it beautiful

00:03:03.840 --> 00:03:07.599
we'll see you guys next time