WEBVTT

00:00:00.480 --> 00:00:08.040
yeah scrapyard Wars scrapyard Wars 2 the

00:00:08.400 --> 00:00:16.160
scrapping I started off the Morning by

00:00:11.880 --> 00:00:19.760
picking up this case and a fan

00:00:16.160 --> 00:00:23.320
and a power bar I'll explain why the

00:00:19.760 --> 00:00:26.800
power bar in a little bit but first

00:00:23.320 --> 00:00:29.240
things first I need to do a case

00:00:26.800 --> 00:00:34.640
swap I didn't realize the bottom hard drive cage was riveted in that will have

00:00:31.199 --> 00:00:38.559
to be removed but it's fine for now I

00:00:34.640 --> 00:00:40.719
bought this core 3000 but it's dusty and

00:00:38.559 --> 00:00:45.160
gross as hell um none of the pictures he had on

00:00:43.200 --> 00:00:49.559
Craigslist showed how dusty it was but it's still a nicer overall case

00:00:48.160 --> 00:00:52.960
than the one that I had and I didn't have any time left to buy anything else

00:00:51.719 --> 00:00:58.199
so I was like whatever might as well just spend my money on it honestly if I had more time I might not have even

00:00:56.559 --> 00:01:03.239
accepted it I probably would have accepted it I just would have hopefully

00:00:59.680 --> 00:01:03.239
had more time to clean

00:01:07.000 --> 00:01:17.119
it wonder what fractal Josh will say when he sees that I mutilated his case

00:01:14.320 --> 00:01:21.400
within like minutes of having it I'm going to say I thought you had style man

00:01:19.360 --> 00:01:25.960
stop making lonus look good what am I going to see next for me socks and

00:01:23.159 --> 00:01:28.960
sandals just remember buddy karma's a

00:01:31.600 --> 00:01:35.920
um I'm trying to get the pump and the

00:01:34.680 --> 00:01:41.600
radiator higher so I can clear the power

00:01:39.240 --> 00:01:45.600
supply just fill up your computer you just be like all

00:01:43.600 --> 00:01:48.960
right except you won't have to fill it up cuz the computer's going to short

00:01:46.759 --> 00:01:53.880
when you try to turn it on so don't worry about it you know I don't even

00:01:51.439 --> 00:01:56.960
care anymore as long as the loop Works screw the computer what's going to end

00:01:55.560 --> 00:02:02.039
up happening here is I'm going to end up gluing a

00:01:59.479 --> 00:02:06.840
whole bunch of these cables unintentionally but it's going to

00:02:04.320 --> 00:02:10.599
happen a whole bunch of those cables are going to be glued

00:02:08.239 --> 00:02:14.360
together then I just have to try to use whatever is available to me to try to

00:02:12.200 --> 00:02:20.440
make it stop leaking I have a tiny bit more epoxy not much though and I have

00:02:16.800 --> 00:02:23.239
one full pack of sugaroo and one and a

00:02:20.440 --> 00:02:28.560
quar possibly a bit stuff of more sugaroo the chances of this right here

00:02:25.760 --> 00:02:34.160
not leaking are like 1% I 100 I

00:02:31.480 --> 00:02:40.080
99% believe that it's going to leak I mean can you imagine if I have to

00:02:37.239 --> 00:02:47.200
present a leaky system to the judges so we need a bigger piece of copper from

00:02:42.840 --> 00:02:48.680
the Metal Mart to uh put over top of our

00:02:47.200 --> 00:02:54.760
CPU here now was that a WTF look or what I

00:02:52.840 --> 00:02:59.400
just realized I'm holding an invoice for one of their competitors that un

00:02:57.599 --> 00:03:02.879
unfortunately I just realized it it well well for what it's worth the thing we

00:03:00.680 --> 00:03:08.120
have isn't going to work I don't no not the stuff you made for us

00:03:05.159 --> 00:03:15.480
the other day yeah I need basically that y but 3 and 58 by 3 and

00:03:11.360 --> 00:03:20.480
58 okay so we're we're hooped then let's

00:03:15.480 --> 00:03:24.040
go to metal market then where is this oh

00:03:20.480 --> 00:03:26.560
Street or it's way above it's oh look

00:03:24.040 --> 00:03:32.920
like pass the Colossus oh that's all

00:03:28.280 --> 00:03:32.920
right can nothing go right

00:03:34.319 --> 00:03:42.760
today now there's a freaking train absolutely brilliant so we're just

00:03:40.599 --> 00:03:49.920
going to sit here and wait for a train to go through completely the center of

00:03:45.799 --> 00:03:53.519
Langley city everywhere we shop people

00:03:49.920 --> 00:03:59.799
keep telling me they hope I have a great

00:03:53.519 --> 00:04:02.120
day not having a great day this put me

00:03:59.799 --> 00:04:05.599
by every possible way of accounting for it over

00:04:03.599 --> 00:04:09.640
budget we couldn't find the mounting hardware we

00:04:07.400 --> 00:04:15.280
need so we're just going to cheat whoa whoa

00:04:12.720 --> 00:04:18.400
whoa wait a minute lonus is cheating wait a minute why am I acting

00:04:24.400 --> 00:04:30.560
surprised introducing lcr's all new

00:04:27.880 --> 00:04:37.919
patented power panel equipped with a 6ot cable so you can

00:04:33.720 --> 00:04:40.000
plug yourself in super far away yeah

00:04:37.919 --> 00:04:44.199
your stuff that isn't going to work at all cuz it's going to be covered in

00:04:42.280 --> 00:04:49.280
water and metal it's going to short itself out and

00:04:46.960 --> 00:04:58.440
then short itself out again want to go leak test it

00:04:53.120 --> 00:04:58.440
almost almost this works

00:04:59.759 --> 00:05:05.680
and whatever leaked didn't actually leak much I don't even know what it is cuz

00:05:04.160 --> 00:05:10.120
the cloth like didn't even get wet really we watched long enough I'm bound

00:05:07.880 --> 00:05:11.960
to do something clever

00:05:11.960 --> 00:05:21.639
eventually copper

00:05:21.639 --> 00:05:29.440
sugar new plan we're going to find a much bigger

00:05:27.520 --> 00:05:35.800
object to coil around maybe one of these five Gall buckets and we are going to

00:05:32.160 --> 00:05:37.360
make an external coil that we put on the

00:05:35.800 --> 00:05:41.880
side panel here

00:05:39.639 --> 00:05:46.680
um we have no choice I don't know if it'll fit I don't

00:05:44.560 --> 00:05:52.400
know if it'll fit in there what if we went right on top and we kind of like

00:05:50.000 --> 00:05:57.080
spread it out a little bit actually that could kind of work all

00:05:55.120 --> 00:06:00.880
right so John is sleeping so we're going to try and get our copper tubing in

00:05:59.680 --> 00:06:06.240
inside our case somehow let's drill a

00:06:04.120 --> 00:06:12.199
hole I'm sure someone's going to point this out I know this is a wood hole saw

00:06:08.840 --> 00:06:16.400
I know this is steel I know that's a

00:06:12.199 --> 00:06:16.400
problem just so we're all on the same

00:06:18.479 --> 00:06:26.000
page going make it through this puppy okay let's go see if John's home

00:06:23.880 --> 00:06:31.160
or awake I'm going to send this video to John when we're done and he's just going

00:06:28.000 --> 00:06:33.160
to be like what the hell he's going to

00:06:31.160 --> 00:06:39.400
be he's going to be amazed that we got as far as we did without his

00:06:35.199 --> 00:06:41.759
help okay so we finished cutting out the

00:06:39.400 --> 00:06:46.720
little cutaway that we need for the Caps that are next to the socket but what we

00:06:44.960 --> 00:06:50.919
haven't done is actually finish the surface of the CPU block where it's

00:06:48.080 --> 00:06:54.039
going to make contact with the CPU so for that we actually need to change the

00:06:52.160 --> 00:06:58.639
bit so this is what we're using yeah this little guy here is it's more for

00:06:56.479 --> 00:07:02.960
Milling that means that there's a cutting blade here and a cutting blade

00:07:00.280 --> 00:07:07.400
over here and that goes in takes the place of this little bit here so it goes

00:07:05.639 --> 00:07:12.840
in like this and then I Center everything and I just set it up so it

00:07:10.400 --> 00:07:16.960
the ne next time it goes past and here it's going to be taken about a th off so

00:07:14.800 --> 00:07:20.800
it just clean this up it'll make it look like it you got it in the store now the

00:07:18.919 --> 00:07:24.120
college educated among you will have probably noticed that there are some

00:07:22.520 --> 00:07:28.759
definite marks on the bottom of the block that's actually not as important

00:07:26.840 --> 00:07:34.039
as having a flat surface because our thermal compound is going to fill these

00:07:31.280 --> 00:07:37.479
little micro scratches in the surface here we smooth those out too oh we can

00:07:35.680 --> 00:07:44.080
do that too yeah yeah yeah good old fashion sandpaper oh I gu none of the

00:07:40.560 --> 00:07:46.919
judges will ever see and

00:07:44.080 --> 00:07:51.319
appreciate the block manufacturing that went on all they're going to see is this

00:07:49.440 --> 00:07:55.479
copper plate with a couple old nubbins sticking out of it they're not going to

00:07:53.159 --> 00:08:00.159
they're not going to know what's going on under the hood here so I want the

00:07:58.039 --> 00:08:06.680
audience to at least appreciate app the uh magnificence of our water

00:08:03.039 --> 00:08:09.000
block here now we could have done better

00:08:06.680 --> 00:08:13.000
if we' done certain things and I'm aware of the things that we could have done

00:08:10.520 --> 00:08:18.080
better like for example having a rubber gasket sealing this or not using mixed

00:08:14.840 --> 00:08:20.560
Metals but hey for a homemade

00:08:18.080 --> 00:08:24.919
block that we know nothing about its performance

00:08:21.960 --> 00:08:30.280
yet pretty darn good someone might be wondering how you drain this Loop the

00:08:26.879 --> 00:08:33.640
answer is you don't ever do that

00:08:30.280 --> 00:08:35.519
it's impossible as far as I can tell

00:08:33.640 --> 00:08:38.519
considering everything is epoxied together it would literally be

00:08:36.800 --> 00:08:42.279
impossible to trans Loop unless you inverted the computer and then poured it

00:08:40.599 --> 00:08:45.160
out of there but if you're going to do that this stuff at the bottom isn't

00:08:43.760 --> 00:08:48.839
fixed and everything's probably going to break I'm just I'm stuck here for a

00:08:49.320 --> 00:08:56.760
while I have to hold each side of this tightly so that water doesn't come

00:08:54.000 --> 00:09:01.440
through so the epoxy can hopefully dry how long does it take usable strength in

00:08:58.600 --> 00:09:01.440
8 hours

00:09:03.440 --> 00:09:12.720
we're kind of uh we're kind of stuck for about 30 minutes here so all that's left

00:09:09.120 --> 00:09:15.839
is to solder our tubing onto the CPU

00:09:12.720 --> 00:09:17.959
block fuse the CPU block with some kind

00:09:15.839 --> 00:09:22.800
of a sealant probably just silicone because we're not at the point where we

00:09:20.079 --> 00:09:29.040
can do anything fancy anymore do up our Reservoir and build the

00:09:25.440 --> 00:09:32.839
computer that's where we're at it is now

00:09:29.040 --> 00:09:35.399
the end of the fourth day of scrapyard

00:09:32.839 --> 00:09:39.440
Wars 2 the judges are going to have to be extremely generous for me to get

00:09:38.480 --> 00:09:43.480
anything resembling a competitive score in this

00:09:41.920 --> 00:09:47.519
competition I'm going to give it one more code of epoxy but I think we're

00:09:48.120 --> 00:09:53.440
done I think that's it yeah one more Cod

00:09:51.519 --> 00:09:56.160
of epoxy but I'm basically calling it right now I'm just going to do one more

00:09:54.600 --> 00:10:00.600
coat but I'm I'm finished I'll bring it out to the garage

00:09:58.399 --> 00:10:04.680
after this and just let it's it all right so as you can see it's

00:10:02.880 --> 00:10:11.800
getting dark taran's gone home for the night but John out of the graciousness

00:10:09.440 --> 00:10:18.600
of his heart is still helping me because we still have to attach the pump to the

00:10:14.920 --> 00:10:21.800
reservoir and I think we've got a plan

00:10:18.600 --> 00:10:24.200
wasn't my plan I think we've got a plan

00:10:21.800 --> 00:10:29.880
that's going to work if she fits she sits just like that

00:10:28.480 --> 00:10:35.399
nice and tight now we wanted a clear silicone for this

00:10:33.320 --> 00:10:40.360
but Home Depot is a little closed at the moment so uh we went with a white one

00:10:38.079 --> 00:10:44.560
it's not as pretty but it should seal up just nicely we'll know in half an hour

00:10:43.240 --> 00:10:51.279
we're going to use our sealant and four screws here to close up

00:10:48.560 --> 00:10:55.920
the block y that I actually had almost no hand whatsoever in actually making

00:10:56.000 --> 00:11:01.680
mm silicone seal yep here we

00:11:04.680 --> 00:11:10.680
go so it's finally poor time I have very

00:11:07.680 --> 00:11:13.920
little confidence in this seal at the uh

00:11:10.680 --> 00:11:16.160
for the power cord for the pump but at

00:11:13.920 --> 00:11:21.160
the very least we can find out how everything else is doing no obvious leak

00:11:18.639 --> 00:11:25.600
at the pump Outlet that's the most essential because worst case scenario

00:11:23.839 --> 00:11:31.639
our judges aren't that water cooling savvy so we could just um

00:11:30.160 --> 00:11:35.279
we could just try to get away with one here and just have our water level down

00:11:39.160 --> 00:11:45.519
here okay so that is clearly

00:11:43.240 --> 00:11:50.639
dissolving either because in half an hour it's not cured enough or because it

00:11:47.680 --> 00:12:00.399
just plain wasn't going to work for this so I had 100%

00:11:55.120 --> 00:12:00.399
silicone in my bathroom drawer

00:12:01.360 --> 00:12:08.959
our pump doesn't have enough head pressure to start our Loop we might be

00:12:06.639 --> 00:12:14.560
able to tip it to make it a little bit easier on our pump the good news is our

00:12:11.519 --> 00:12:16.680
CPU block isn't leaking yet so that's

00:12:14.560 --> 00:12:20.959
the good news there isn't much good news right now that was all the good news I

00:12:18.240 --> 00:12:26.760
had W hey look at that okay so basically what we're doing

00:12:23.480 --> 00:12:31.240
right now is cleansing the system of all

00:12:26.760 --> 00:12:33.720
the junk and debris and and dissolved

00:12:31.240 --> 00:12:42.320
crap that's in there now then what I'm going to do is take the CPU block and

00:12:37.680 --> 00:12:44.560
the reservoir parts that are bad

00:12:42.320 --> 00:12:51.320
apart redo them with silicone let it set overnight and hope

00:12:48.040 --> 00:12:52.839
that by 24 hours they mean 12 hours for

00:12:51.320 --> 00:12:58.959
Better or For Worse this computer is liquid

00:12:56.720 --> 00:13:03.600
cooled well you know what hold on hold on let's go ahead and ask who you guys

00:13:01.360 --> 00:13:08.160
think is going to win I think Luke will win scrapyard Wars 2 the scrap ining

00:13:05.800 --> 00:13:13.760
he's taller I think Luke will win if he doesn't we all lose I think luk is going

00:13:11.199 --> 00:13:18.920
to win scrapyard Wars sorry lonus love you both and myself rooster who do I

00:13:17.279 --> 00:13:22.800
think is going to win I think Luke is going to win because just uh I think

00:13:20.959 --> 00:13:26.040
lonus will win because he knows how to climb trees which you know is really

00:13:24.680 --> 00:13:30.760
important for building computers after all welcome to Scrapyard Wars 2 the

00:13:28.680 --> 00:13:35.920
finale we're doing the format a little bit differently this time because it's

00:13:33.360 --> 00:13:40.000
not as simple as oh well let's Benchmark it and find out who wins so we actually

00:13:38.160 --> 00:13:45.639
have a panel of four judges including Taran Brandon and the two Knicks so one

00:13:43.440 --> 00:13:49.639
person for each of us who toiled with us through the entire Endeavor and two

00:13:47.440 --> 00:13:54.120
people who have never seen the system first section is creativity worth 10

00:13:51.880 --> 00:13:59.120
points next up is Effectiveness worth another 10 points then Aesthetics 10

00:13:56.600 --> 00:14:04.600
more points Acoustics 10 more points and finally overall just general category 10

00:14:01.959 --> 00:14:08.519
points to a total of 50 now the overall is very much up to the Judgment of well

00:14:06.639 --> 00:14:14.800
the judges so if we did things like went over time went over budget or utilized

00:14:12.160 --> 00:14:19.240
lifelines so if we got outside help with our project that we didn't directly pay

00:14:17.000 --> 00:14:24.720
for then they're going to have to factor that in to our scores I would like to

00:14:21.800 --> 00:14:29.320
point out that it was actually just for lifelines and going over time and going

00:14:27.160 --> 00:14:34.440
over budget we actually like completely breaking everything but it's okay we'll

00:14:32.199 --> 00:14:38.240
move forward I guess so you guys can actually come

00:14:36.519 --> 00:14:41.759
around here we're facing the system here first of all I would like to welcome all

00:14:39.639 --> 00:14:47.600
the judges here today to the unveiling of the ghetto FR 3000 you're honored to

00:14:45.079 --> 00:14:52.399
have me here this first thing that I would like to point out okay first thing

00:14:50.199 --> 00:14:58.199
that I would like to point out is the patent pending easy fill technology

00:14:55.560 --> 00:15:01.440
have so as you will see in a moment this goes into the computer is actually the

00:14:59.639 --> 00:15:04.839
reservoir so you can fill the computer directly or drain the computer directly

00:15:03.000 --> 00:15:10.639
just through the top very easy to do another thing in our patent pending easy

00:15:07.600 --> 00:15:13.000
technology is the uh we're inspired by

00:15:10.639 --> 00:15:18.160
Tesla technology so what we did was we introduced the power panel not the power

00:15:15.959 --> 00:15:21.680
wall but the power panel so on the back of the computer here if you guys kind of

00:15:20.040 --> 00:15:26.519
rotate around a little bit you can see that there's a mounted powerb bar and

00:15:24.440 --> 00:15:30.360
actually only one power cable actually leaves the computer so you can plug plug

00:15:28.759 --> 00:15:33.880
your monitor into there you can plug your speakers into there all of your

00:15:32.000 --> 00:15:39.399
power can plug directly into the computer with our patented patent

00:15:36.000 --> 00:15:41.079
pending easy uh Power panel so once you

00:15:39.399 --> 00:15:46.079
open the side of the case you actually get to the the the

00:15:43.399 --> 00:15:49.800
challenging parts of this build so you can see we spared no cost I don't know

00:15:48.560 --> 00:15:54.560
if I'm going to mention brand names but yes it is a high quality high quality

00:15:52.000 --> 00:15:59.399
water bottle eco-friendly actually yes here this is this is uh the Luke

00:15:56.480 --> 00:16:04.680
Industries Luke Industries yes more like re War oh as you can see here The

00:16:02.959 --> 00:16:11.079
Benchmark is currently running and we're at a not too bad 55° let's go ahead and

00:16:08.360 --> 00:16:14.959
see what the judges think I actually discovered something quite interesting

00:16:12.360 --> 00:16:19.480
if you want to hop on over here I just saw this little thing leaking a little

00:16:17.079 --> 00:16:26.680
bit of water into the power supply I don't know how reliable it is

00:16:22.720 --> 00:16:28.240
now is this a functional build M uh it

00:16:26.680 --> 00:16:31.519
it it's not we saw that water leaking straight into the into the power supply

00:16:29.880 --> 00:16:35.560
which is not good it have to be fixed up honestly how bad do we know that leak is

00:16:33.759 --> 00:16:38.839
okay so aside from our bias judge we think that uh the build may be

00:16:37.319 --> 00:16:43.440
functional if he fixes the link but at this point we're not entirely

00:16:41.000 --> 00:16:50.680
sure ladies and gentlemen gentlemen gentlemen gentlemen you've seen the

00:16:47.160 --> 00:16:52.959
zero now you're going to see the hero

00:16:50.680 --> 00:16:57.199
welcome to the unveiling of the winner of scrapyard

00:16:55.600 --> 00:17:00.839
Wars 2 my system is

00:17:02.160 --> 00:17:08.919
horrible oh

00:17:05.280 --> 00:17:11.000
damn girl that looks

00:17:08.919 --> 00:17:16.959
good this is the Uber

00:17:13.520 --> 00:17:18.839
cooler Magic Machine

00:17:16.959 --> 00:17:23.520
5000 it features what I call and this is my uh

00:17:22.400 --> 00:17:26.360
personal trademark the

00:17:26.360 --> 00:17:36.960
uh what do I call it I don't remember what I call it uh this is a copper coil

00:17:33.039 --> 00:17:38.559
cooling system or CCS for short so let's

00:17:36.960 --> 00:17:43.080
start by firing up the system just to demonstrate that it does in fact work

00:17:40.160 --> 00:17:51.720
you can see here at the front of my case all bays are populated by either a

00:17:47.520 --> 00:17:55.679
drive or a bay cover I also have an e

00:17:51.720 --> 00:17:59.200
SATA port for outstanding connectivity

00:17:55.679 --> 00:18:02.799
very modern two USB 2.0 ports my air

00:17:59.200 --> 00:18:05.120
intakes are here this door folds out

00:18:02.799 --> 00:18:09.480
more than a typical door you can see it's on two hinges so that if you

00:18:07.200 --> 00:18:12.240
accidentally bump it it doesn't break off as

00:18:12.280 --> 00:18:19.120
easily quiet H I think that's a 10 out of 10

00:18:16.880 --> 00:18:25.039
for Acoustics not that I can uh tell the judges too much about how to judge the

00:18:22.240 --> 00:18:31.919
system but that's a 10 out of 10 now you can clearly see the copper coil is is

00:18:29.000 --> 00:18:35.960
very stable okay this is the moment everyone brace brace yourselves this is

00:18:33.760 --> 00:18:42.320
a thing of beauty in here okay hold on there we go you see

00:18:40.200 --> 00:18:46.400
that security it doesn't lock but it's so hard to remove you'd think it was

00:18:44.120 --> 00:18:51.720
locked so this my friends is the heart and

00:18:49.120 --> 00:18:56.960
soul of this machine now there is some water down here that is old water that

00:18:54.559 --> 00:19:01.960
is old water from this last night when this was still leaking now I have to

00:18:59.280 --> 00:19:07.520
confess I did go a little bit over time probably about 18 to 20 hours over time

00:19:04.360 --> 00:19:10.320
wo wo wo now we've gone with the what I

00:19:07.520 --> 00:19:16.919
call a camel top system where the cooling hump is located on top of the

00:19:13.400 --> 00:19:19.640
system instead of using fittings

00:19:16.919 --> 00:19:26.919
soldered or brazed to the ends of our copper we have actually just zip tied

00:19:23.080 --> 00:19:29.559
tubing directly onto our copper pipe is

00:19:26.919 --> 00:19:33.280
that reliable actually it seems to be working okay surprisingly another

00:19:31.640 --> 00:19:40.320
Innovative cost-saving measure and I'm saving this one is the fact that the CPU

00:19:37.280 --> 00:19:44.320
block is using saw off pieces of this

00:19:40.320 --> 00:19:49.760
tubing soldered to The Copper Top of our

00:19:44.320 --> 00:19:53.360
fully custom CNC cut water block as

00:19:49.760 --> 00:19:56.120
fittings so we brought our budget by

00:19:53.360 --> 00:19:59.200
returning about $40 worth of fittings that we had already purchased by

00:19:57.799 --> 00:20:04.520
returning it we brought our total spent on the water

00:20:01.559 --> 00:20:04.520
cooling down to

00:20:05.679 --> 00:20:12.880
$198 just shy of the 200 Mark for our

00:20:09.360 --> 00:20:14.840
system we paid 280 and I bought some uh

00:20:12.880 --> 00:20:19.559
Ninjago ninjas that I was planning to put in it but they weren't they weren't

00:20:16.679 --> 00:20:23.039
very posable and I forgot if you want to come over here judges and have a look at

00:20:21.360 --> 00:20:28.280
where we're sitting we've been under load for about 7 minutes while I've been

00:20:25.039 --> 00:20:30.960
talking and we're sitting at around 87°

00:20:28.280 --> 00:20:37.640
on the CPU which gets us fully turboed up on our core i7 930 which is a very

00:20:33.880 --> 00:20:40.080
high heat output CPU by the way full

00:20:37.640 --> 00:20:45.080
performance not the lowest temperatures but incredibly

00:20:42.400 --> 00:20:49.200
quiet with the CPU actually being passively cooled by the copper Loop but

00:20:47.000 --> 00:20:53.400
wait there's more if you had a little bit more money to spend than we did you

00:20:51.840 --> 00:20:59.559
could get yourself a room fan oscillating room fan right there cools

00:20:56.640 --> 00:21:04.559
the coil cools you cool cools the coil cools you hot summer day computer's good

00:21:02.120 --> 00:21:09.960
you're good everyone's good and that is my presentation thank you judges I think

00:21:07.640 --> 00:21:17.600
it's about time the judges pick a winner and pick a sore loser for Luke

00:21:13.039 --> 00:21:20.600
system 100 38 points the possible total

00:21:17.600 --> 00:21:23.600
scoring for lus system out of

00:21:20.600 --> 00:21:23.600
200

00:21:25.400 --> 00:21:33.320
10031 I can't believe you got that close to me actually ridiculous I guess mine

00:21:30.039 --> 00:21:35.320
did me yeah a Lifeline almost a whole

00:21:33.320 --> 00:21:39.520
day of extra time yours will literally thanks for watching scrapyard Wars 2 uh

00:21:38.080 --> 00:21:45.840
we will definitely be back with more scrapyard Wars scraping like and SC like

00:21:42.400 --> 00:21:48.120
and like And subscribe scrap button and

00:21:45.840 --> 00:21:52.760
we could have a special celebrity guest on the next episode of scrapyard very a

00:21:50.320 --> 00:21:57.000
very hard nippled celebrity guest see you next time bye