1
00:00:07,359 --> 00:00:13,559
okay it's personal rig update 11 times so I've made a few more changes to the

2
00:00:11,840 --> 00:00:19,920
case and I'm actually starting to put it back together so I want to do a complete

3
00:00:16,920 --> 00:00:22,199
dry run with the System Assembly before

4
00:00:19,920 --> 00:00:27,080
I send it off to be powder coated last time I got this case powder coated I

5
00:00:24,160 --> 00:00:32,279
actually forgot to send this piece this piece and one other piece I think it was

6
00:00:29,679 --> 00:00:35,760
this one up here to the powder coater so I ended up with a few silver pieces left

7
00:00:34,160 --> 00:00:41,480
I don't want to make that mistake again I also want to make sure that all of the

8
00:00:38,440 --> 00:00:43,760
cable management holes that I've cut are

9
00:00:41,480 --> 00:00:48,600
going to actually help me so the cable management holes I've cut since last

10
00:00:45,239 --> 00:00:51,640
time are this one for the front USB 3

11
00:00:48,600 --> 00:00:55,239
I've also cut a hole in the bracket for

12
00:00:51,640 --> 00:00:56,840
the front USB 3 dad so uh this will be

13
00:00:55,239 --> 00:01:02,719
powder coated as well don't mind the ugliness so that'll be there um

14
00:01:01,760 --> 00:01:08,360
I've also cut some table management holes in

15
00:01:05,680 --> 00:01:13,280
the back of the motherboard tray here so this will help me get things like the

16
00:01:10,200 --> 00:01:16,280
eight pin things like power cables for

17
00:01:13,280 --> 00:01:18,520
my drives uh this will be great for

18
00:01:16,280 --> 00:01:22,119
bringing things like 24 pin up to the front and then this will be great for

19
00:01:20,240 --> 00:01:28,880
things like the fans for that radiator that's going to be in the front bringing them down to the basement to get power

20
00:01:25,920 --> 00:01:32,439
so uh that's the the reasoning for all those I have also

21
00:01:30,560 --> 00:01:39,799
uh expanded some of the cable management holes that I put in the motherboard back

22
00:01:35,000 --> 00:01:44,320
plate so let's go ahead and uh put this

23
00:01:39,799 --> 00:01:44,320
in oh hold on wait for

24
00:01:44,439 --> 00:01:53,759
it that's usually a good sign there we go okay so in addition to

25
00:01:50,799 --> 00:01:59,240
the CPU cutout I did last time and yes I have sanded these down they're not going

26
00:01:55,479 --> 00:02:01,840
to cut me or cut my cables I've added uh

27
00:01:59,240 --> 00:02:05,439
a hole here which will bring up the 24 I was going to bring the 24 around this

28
00:02:03,240 --> 00:02:09,560
side and I still may but uh my wife advised me that it should come this way

29
00:02:07,520 --> 00:02:14,920
in order to not look as ugly and then this is for SATA if I ever do use SATA

30
00:02:11,520 --> 00:02:18,280
this is for my front IO so yes dry build

31
00:02:14,920 --> 00:02:21,959
time without powder coating and yeah my

32
00:02:18,280 --> 00:02:24,200
battery died so anyway um test fit time

33
00:02:21,959 --> 00:02:30,760
I've made a little bit of progress on it uh per popular demand or as Whatever by

34
00:02:28,160 --> 00:02:35,519
popular demand the 24 pin will not be going around the T Virus it will instead

35
00:02:32,959 --> 00:02:39,840
sit right about there next to it however that does leave me with a bit of a

36
00:02:37,519 --> 00:02:44,959
challenge um for what to do about the PCIe cables cuz they're not really they

37
00:02:42,280 --> 00:02:49,920
were designed to come out wider the way that I did the sleeving I would have

38
00:02:46,480 --> 00:02:51,239
done them um yeah I would have done them

39
00:02:49,920 --> 00:02:54,640
differently if ID known that I was going to be doing something different with

40
00:02:53,080 --> 00:02:58,239
those like maybe I would have I could have done twos and twos this way and

41
00:02:56,680 --> 00:03:02,400
then brought them down here instead or something like that but right now I really really really don't know what to

42
00:03:00,800 --> 00:03:06,879
do with them really pleased with how this is going to look once this is black

43
00:03:04,239 --> 00:03:15,920
and it doesn't contrast as much so I can get all of my ssds on the back data no

44
00:03:12,599 --> 00:03:18,760
problem um I got to widen this hole up

45
00:03:15,920 --> 00:03:22,120
here or well whatever you can't see that but I I don't know if I already pointed

46
00:03:20,040 --> 00:03:27,640
at this in the other video that I shot but um yeah got a widen

47
00:03:24,840 --> 00:03:31,200
that other than that I'm very very excited about this build now that it's

48
00:03:29,360 --> 00:03:36,560
finally coming together it's just time to uh clean everything off and get it

49
00:03:32,840 --> 00:03:38,120
powder coated so stay tuned guys and

50
00:03:36,560 --> 00:03:43,400
don't forget to subscribe to lus Tech tips for more unboxings reviews and

51
00:03:39,879 --> 00:03:43,400
other computer videos