there's like a little what is that so the second we tried to shoot day five we
hit a snag the problem is that once again we
think the issue is our wireless kit and
uh it's not we killed yet another lav
presumably from having them clipped to my waist and then having tension on them
here because the issue is that and we' we've actually killed one of these
before too one of these Sennheiser ones and then we just killed our countrymen
the issue is that the cables reinforced here and then they just break here so it
feels like the higher you go and reinforce it you're just going to break
it there so I don't know what the solution is it's
ridiculous uh just just add tape to the entirety of the cable so that it's just
one solid line I have no idea what this is mate no it's not from mate apparently
mate bought me another another Blu-ray though oh this is a notebook 15-in
gaming notebook and it's not broken it's true
this is the whole room water cooling
project this is
crazy how long has it been since we've actually worked on this mess 4 months
something like that so uh we are finally back at it and finishing the whole room
water cooling Loop is going to have some challenges that we didn't have the first
time around because now we have to figure out how to finish people's
systems like I don't even have have the I I I don't even have the like the the
tubing finished for some people's systems without interrupting them
working or at least pretending to be
working they're actually eating we are at putting the other ends of the quick
disconnects onto the computers because in order to work on the loop we need to
have people's systems running disconnected disconnected all right
I would never recommend filling the water cooling Loop of a system that's
running while it's running I believe my red is already
full and uh let's find out if my hot
swap system works or not I would
recommend saving your work oh well this is smarter than what I was
doing I just filled the rad with the whole room system uh-huh right that's
way better because now okay well right now your system is in trouble but uh-huh
um so now we don't have to worry about bleeding really nervous oops okay well
we'll go around and we'll do the CPU swaps later I
guess are we short of CPU Taran can I find out what CPU you
have uh very quickly okay
okay I'm going to try and do this right this time how are your temps
doing cuz your water is not moving right
now uh it does seem to be going up
pretty quickly and you are swapped off how's it
look now it's going up it's going up yep
holy crap uh okay just SEC just sec
everything's okay oh
it's no it's still going I know you're not hooked up to anything right
now okay we need coolant
float are we going down yeah wow like
20° yep good um so your pump is it on
your pump doesn't seem to be doing anything all right then so the good the
positive takeaway here is that the whole room pump is working
is that plugged in I thought
so but we're going to double
check the pump is connected to the pump
bone the pump bonees connected to the
case bone the case Bone's connected to
nothing so we got to plug in your pump you know what we probably pulled it out
during the power supply swap yeah never plug it back probably didn't need to
plug it back in or felt like we didn't need to plug it back in no I'm pretty
sure we just forgot well I like to give
people the benefit of the doubt especially when they're me okay oh yours
already has fittings on it yeah I put them on there when I uh felt like it no
you didn't uh what color tubing is that
supposed to be this clear there's definitely a lot of
bubbles in the loop at the moment if it's just that
tubing getting all grossed out or if
it's the blocks yeah the blocks seem fine it's
just ugly ugly coolant like it's you can actually
see um so just just to keep in mind there
are things on top of this PC oh well there probably aren't anymore no do you
making no weird noise um no that's probably there air in
your block now because we're messing around with the loop ble it's probably
okay but all my screens went blue they did no oh my God why do I ever listen to
you one day I'm going to tell you something legitimate and you're going to
be like oh hilarious and then and you're going to die you're going to lose like
your left pinky or something well at least just my left
pinky okay for the first time since we
set it up the whole room water cooling system is off I mean completely off the
fans have been off since about the first week so after all that work to have all
the systems hooked up to a whole room water cooling system we have
successfully disconnected them all yay clap clap clap clap clap clap
but there's a purpose there's a purpose because
this is our new pump which we will
actually be installing in addition to our existing pump now I ordered or a 2md
QSC I ordered a matching one for our other one they actually sent me a 3 MD
QSC so this one's slightly more powerful something I didn't really want um so I
don't know I I I I I think that's not really recommended for serial pump
operation but we don't really have much of a choice at this point so uh this one
has slightly higher head pressure as well as a slightly higher flow rate than
the other one so off we go
so one issue that we've had uh is that
one of the fittings on this pump has actually been leaking see right
here there's uh yeah there's definitely
a leak there so we've actually had some corrosion of the base and
uh it's been kind of nasty this is our anti vibration pad that makes it
slightly less loud all right so that means we have to figure out how to close
off these now I have one idea for one
side like is this going to work what if I just mush
it locking swivel
jaw like this thing is stuck to the
other
one what heck
it doesn't move there you go yay thought I was an
idiot I mean I might still be an idiot what I'm about to do with it is
idiotic so I'm trying to Mush the uh
mush the tubing here water will Rush from this
opening on both on both ends and I don't
know how much I'll be able to do to stop it here wait no it should be fine
because in theory I've blocked them right so what I need to do is plan to do
this one first cuz I suspect this one is less likely to leak as much so I want to
pull this off how much pressure is in there I
don't know it's a mystery it worked wow okay
let's find out uh let's find out if this
is going to hold only one way to know for
sure hippity Boop done it looks like
there's a little bit of corrosion on this uh fitting right here but it might
not be a big deal there is definitely some crap in here that is that is an
extremely that is an extremely bad thing
so that's what's staining the inside of the
tubing I think it's coming from here
which could be a very very bad thing steel Reservoir should be fine if you
have if you're running basically we're just running Automotive antifreeze in
here but it looks like something about it is not
working like it's not obviously just ol
of sediment I wonder if all that Gunk
settled reasonably well cuz we didn't notice any build up on the blocks either
which is good cuz it means it won't affect cooling performance but um I'd
still like to have things cleaner than that if it can be so here are the
floaties I'm talking about and how they're kind of
mushy which leads me to believe that there's some kind of life form as
opposed to just being um like rust build up also kind of
greasy but then that could just be the SE I don't know sea
monkeys yeah not what we were trying to do here what this means now is that we
either have to accept that there's stuff growing in our Loop
and write off all the gear that's
attached to it as contaminated until it's cleaned or we have to take
everything apart replace all the tubing clean all the blocks and replace this
Reservoir in order to start fresh so uh given that we're moving in 2
months we are going to go for the temporary
solution um which is flush the res flush
the loop um go much much heavier on the on
the antifreeze this time and uh and and
kind of live with it for another couple months before we
move experience silent performance with the new Cooler Master silencio 652 s
minimalist design maximum compatibility click now to learn more I don't know if
our hose still works
this kind of fell okay well the stuff
that's on the lip here see that's funny it seems kind of
greasy you know I wonder if it I Wonder Maybe I'm Wrong maybe it's
not maybe it's not living maybe it's just something left over in here from
manufacturing well we didn't have a lot of options in terms of reservoirs but I
can see we made the wrong choice
oh groy that doesn't look like a coating
and it's like it's all over the the upper walls as well and I remember
looking into it like there was nothing on there before but I'm not sure what we managed
to introduced to the system that grows in an antifreeze water mixture
maybe some of the viewers will have some insight they all appear to be experts on
this kind of project anyway like coming into today I was
thinking we might need some kind of a filter in line or something something
like that but this is clearly just
beyond filtration putting this back in the loop
doesn't seem to be an option
so what I think we're going to do
as stupid as this is um is we're going
to leave the loop open for now with like
buckets yep we're going bucket water
cooling um because I don't want to especially now that I've Disturbed
whatever's in here we're going to get chunks going through the loop and if one
of those chunks ends up in a water block
the cooling performance of that system is hooped I don't think that's happened
yet I don't have a reason to believe that's happened yet looking at the temperatures of people's
systems so uh we can't we can't risk that happening so then what we'll need
to do is we'll need to get a replacement reservoir for when we move and um when we move we will have to
we'll have to do something we'll have to clean out the system we'll have to clean out the tubing and blocks and start
fresh the radiators are going to be a real problem we may need to just replace
them so while at took a break to uh copy
footage I figured I'd get our pumps
prepped it turns out the reason it was leaking was way back when I uh when I
initially used this pump I apparently didn't know what Teflon tape was because
I apparently didn't use it so that would be why that fitting was leaking um I
also spent a little bit of time Googling and while an while Automotive antifreeze
does indeed contain an anti-corrosive which is good that's what I was really
concerned about what it does not contain and I had I guess assumed it contains is
a biocal agent so that is why our Loop
is full of what is now definitely organic matter not only have no flux I I
have no solder I I do have to go to Home Depot you probably have a sandbag on
your ladder like my Vol but the sound means it's not working best not to
breath that in