WEBVTT

00:00:00.120 --> 00:00:07.839
a year ago we took a look at the prusa markv today we're looking at the prusa

00:00:04.600 --> 00:00:10.040
Mark 4S which is a big upgrade and for

00:00:07.839 --> 00:00:13.920
the same price or if you already have a markv only a $100 upgrade kit so we're

00:00:12.679 --> 00:00:20.519
going to take a closer look at some of the upgrades that theyve put into it

00:00:17.080 --> 00:00:22.320
we gummy bears as always we use the

00:00:20.519 --> 00:00:25.960
crues around the office quite a bit they're one of the workhorses we have

00:00:23.800 --> 00:00:29.679
around here and I'm looking forward to adding these

00:00:28.199 --> 00:00:33.000
ones to our Arsenal and upgrading the ones we have to

00:00:35.559 --> 00:00:42.559
this as always another USB stick

00:00:39.079 --> 00:00:45.559
anything else hiding yes many things

00:00:42.559 --> 00:00:46.800
hiding more boxes in this box we have

00:00:45.559 --> 00:00:53.760
the accessory kit which has a bunch of tools a

00:00:50.719 --> 00:00:56.800
filament guide spool holder and some

00:00:53.760 --> 00:01:00.120
lube and a couple of other odds and ends

00:00:56.800 --> 00:01:02.120
and a spool of filament Galaxy black

00:01:00.120 --> 00:01:07.680
always pretty most of the parts of this are similar to The markv but there are

00:01:04.680 --> 00:01:10.080
two big improvements one is the part

00:01:07.680 --> 00:01:14.759
cooling shroud and fan system which is going to allow for faster Printing and

00:01:12.680 --> 00:01:19.080
way better overhangs and something we can't see right now is a new hot end to

00:01:16.759 --> 00:01:23.000
allow for way higher flow rates some of the other quality of life upgrades are

00:01:21.400 --> 00:01:27.000
the screen cover which is now injection molded and some of the more mechanically

00:01:25.320 --> 00:01:31.200
robust parts are printed out of a polycarbonate carbon fiber infused

00:01:28.799 --> 00:01:35.920
filament the unit we got was fully assembled so just take it out of the box

00:01:33.200 --> 00:01:40.079
put it down plug it in and go they say it would take you about 10 minutes to

00:01:37.600 --> 00:01:44.040
get from out of box to your first print let's flick it on one of the other

00:01:42.119 --> 00:01:47.600
things they've released is a mobile app and an update to their desktop app this

00:01:46.479 --> 00:01:51.840
allows you to browse through your printers start and stop prints and you

00:01:50.560 --> 00:01:56.799
can set up print notifications for either failures or successes and other

00:01:54.159 --> 00:02:00.360
General printer status information setup pretty straightforward you just tap the

00:01:58.439 --> 00:02:06.240
NFC with your app going and scan a QR code to get it set

00:02:04.159 --> 00:02:09.520
up as with all PR printers you don't need to have it set up to the Wi-Fi and

00:02:07.920 --> 00:02:13.239
you can print completely offline if you want to let's finish up the self tests

00:02:11.720 --> 00:02:18.959
and calibrations it's going to go through and just make sure that all the systems are behaving the way it expects

00:02:16.480 --> 00:02:23.319
to make sure that it arrived in fully functioning

00:02:20.519 --> 00:02:28.239
order hi there o nice and quiet

00:02:30.080 --> 00:02:35.040
one of the things I appreciate with the prusa systems is they go through the

00:02:33.200 --> 00:02:38.519
self testing calibration right at the start and then after that you pretty

00:02:36.879 --> 00:02:41.920
much never have to recalibrate them unlike some of the other systems which

00:02:39.879 --> 00:02:45.959
run it before every single print which can take a lot of extra time when you're

00:02:43.599 --> 00:02:51.360
running a lot of prints it's all the main axis

00:02:47.640 --> 00:02:54.280
done and heat testing this might take a

00:02:51.360 --> 00:02:58.920
minute that's probably a good time to cut cut cut cut since we didn't build

00:02:57.519 --> 00:03:02.720
this printer ourselves we don't have to deal with the gearbox test but from what

00:03:00.959 --> 00:03:05.680
I've seen it's pretty straightforward all right now we're

00:03:04.519 --> 00:03:11.879
going to take out the filament and make sure the filament sensor is working correctly insert filament make

00:03:09.799 --> 00:03:15.400
sure doing more calibrating and

00:03:13.799 --> 00:03:19.599
remove sweet happy printing now that the

00:03:17.920 --> 00:03:23.280
printer is all set up and ready to go let's give you a word from our sponsor

00:03:21.319 --> 00:03:28.040
delete me protecting yours and your family's online privacy is a team effort

00:03:25.920 --> 00:03:31.560
and with delete me's new family plans everyone in your household is covered

00:03:29.560 --> 00:03:35.280
each family member receives personalized data cleanup services to keep their

00:03:33.120 --> 00:03:39.560
private information secure and from kids to adults they ensure everyone is

00:03:37.080 --> 00:03:43.439
protected from online threats and scams so don't wait give your family the peace

00:03:41.799 --> 00:03:46.799
of mind they need by heading to the link in the video description to learn more

00:03:45.640 --> 00:03:51.400
while this is heating up one of the other changes they made was to put some

00:03:49.360 --> 00:03:55.079
more bearing style engineering materials on the inside of the gearbox housing

00:03:53.439 --> 00:03:59.879
just to give smoother running in the long term generally speaking prusa

00:03:57.720 --> 00:04:04.560
doesn't push printed as fast as you possibly can but one of the things they

00:04:01.879 --> 00:04:08.280
did include on this is an 8-minute Beni which I'm very curious to see how that

00:04:09.439 --> 00:04:13.239
runs that was really

00:04:13.599 --> 00:04:19.639
fast and it looks really good especially

00:04:17.120 --> 00:04:25.280
given how quickly it printed obviously not a regulation Beni it's a little

00:04:21.320 --> 00:04:27.560
Hollow but still for how quickly that

00:04:25.280 --> 00:04:31.039
printed this looks spectacular one of the big things that

00:04:29.400 --> 00:04:36.080
they claiming is to be able to handle 75° overhangs without any support

00:04:34.120 --> 00:04:40.039
cleanly I've done a couple of test prints on some of the other printers we

00:04:37.880 --> 00:04:46.160
have in house we'll start a print here and see how it turns

00:04:42.199 --> 00:04:47.759
out overall I'm really excited for the

00:04:46.160 --> 00:04:51.960
upgrades that this brings and I'm probably going to reach out to them

00:04:49.479 --> 00:04:55.720
today to get a bunch of kits to upgrade all of our printers internally cu the

00:04:54.280 --> 00:05:00.360
speed Improvement and the quality improvement looks substantial and all of

00:04:58.600 --> 00:05:04.680
these upgrades coming at the same price point as the original printer at $800

00:05:02.440 --> 00:05:08.080
for the build your own kit and ,100 for the

00:05:05.600 --> 00:05:10.840
pre-built it's pretty compelling if you want to see us talk about other printers

00:05:09.360 --> 00:05:17.120
in the future make sure to like And subscribe

00:05:13.240 --> 00:05:17.120
bye-bye bye