WEBVTT 00:00:00.160 --> 00:00:05.120 all right ladies and gentlemen welcome 00:00:03.439 --> 00:00:11.040 to our attempted reassembly of our 8k red 00:00:08.400 --> 00:00:14.799 camera so i took it apart what's that face for 00:00:12.320 --> 00:00:19.199 i don't want to be responsible for this so i took it apart a long time ago and i 00:00:17.920 --> 00:00:24.480 the intention was to water cool 00:00:21.680 --> 00:00:31.119 this camera uh the problem that i ran into though is that i never did any 00:00:27.439 --> 00:00:33.040 before readings so we would go and water 00:00:31.119 --> 00:00:37.600 cool the camera but then we wouldn't have any bass line to compare it against 00:00:35.040 --> 00:00:41.840 and so the realization was that i needed to put it back together so i enlisted 00:00:39.680 --> 00:00:44.960 alex's help and we are gonna put this camera 00:00:42.960 --> 00:00:48.399 back together summer break just started but it's never too early to start 00:00:46.480 --> 00:00:52.640 looking for a new laptop for back to school every origin pc laptop is ready 00:00:50.800 --> 00:00:55.440 for whatever games or school projects you're gonna tackle and you can check 00:00:54.000 --> 00:01:05.600 out their special deals at the link below 00:01:05.600 --> 00:01:11.119 so let's start by having a look at what's in the bin here so every one of 00:01:10.080 --> 00:01:16.080 these is oriented exactly the way that it needs to be in 00:01:15.119 --> 00:01:19.600 here so that the screws that are taped into 00:01:18.560 --> 00:01:25.840 place don't fall out because they're all 00:01:23.040 --> 00:01:29.920 kind of samey looking with just subtle differences between them and if they 00:01:27.759 --> 00:01:34.320 weren't sitting in the slots where they go it would be really hard to not 00:01:32.320 --> 00:01:38.479 accidentally put a screw that's too long into a place that's too short and 00:01:37.119 --> 00:01:43.119 dead camera yeah that's a really easy thing to do in 00:01:41.119 --> 00:01:47.200 my experience taking apart and reassembling laptops so i can't even 00:01:45.280 --> 00:01:52.640 imagine for this yeah um so let's go ahead and start taking 00:01:51.040 --> 00:01:57.360 pieces out carefully 00:01:54.240 --> 00:02:01.439 carefully there bud 00:01:57.360 --> 00:02:03.840 so because it's been six months since i 00:02:01.439 --> 00:02:10.879 took this apart i have no idea how to put it back together 00:02:07.439 --> 00:02:12.640 but fortunately we actually uh we first 00:02:10.879 --> 00:02:16.959 heard from these guys like what two years ago we first 00:02:14.400 --> 00:02:21.520 thing is actually uh three years or something like that so a 00:02:18.959 --> 00:02:26.400 company called les payne software normally when you ingest red footage um 00:02:24.640 --> 00:02:32.720 it's it's raw footage so you end up with these r3d files that are split up into 00:02:29.680 --> 00:02:34.480 four gig chunks so this is one long 00:02:32.720 --> 00:02:38.879 video clip that you're looking at here but it's in these like three chunks 00:02:36.959 --> 00:02:42.800 um and as you can see there's no thumbnails 00:02:40.080 --> 00:02:48.640 or anything like that so the only way to really find out what's in them 00:02:45.760 --> 00:02:54.000 is to open them in red player which is pretty tedious or you can use this 00:02:51.760 --> 00:02:58.160 program called red cine x pro which is free well that is to say free for anyone 00:02:57.040 --> 00:03:01.280 who buys a red camera 00:03:01.360 --> 00:03:06.080 and then you can navigate to your folder 00:03:06.159 --> 00:03:12.959 and is that what's in here 00:03:10.400 --> 00:03:18.239 whatever it it sucks and it's not it's not great for like browsing media so 00:03:15.680 --> 00:03:22.239 that is where kaino comes in so with kaino this card 00:03:19.920 --> 00:03:27.200 we should be able to take our red disassembly here we just drill down 00:03:25.200 --> 00:03:32.000 and there we have it that's all the clips and we can browse 00:03:29.920 --> 00:03:35.360 them and move them around if we should see fit and wow that's a lot of video 00:03:34.400 --> 00:03:42.480 footage so video is good pictures are good both is best 00:03:40.000 --> 00:03:45.840 okay so i guess we start at the end yeah so i even recorded some short video 00:03:44.080 --> 00:03:52.080 clips for ourselves okay so there you go andy 00:03:48.239 --> 00:03:53.680 uh past Linus has our back 00:03:52.080 --> 00:03:58.400 that's the screw we're looking for you got it now i just have to find it 00:03:57.360 --> 00:04:03.760 um how about this one i think these guys 00:04:01.599 --> 00:04:06.640 okay well there's the same screw yeah yeah we both came to the same place you 00:04:05.120 --> 00:04:11.949 just almost drop it yep if the rest of the video goes this well 00:04:12.000 --> 00:04:17.919 so you're putting that heatsink back on how's that going for you i'm just 00:04:16.239 --> 00:04:22.639 loosely putting the screws in it seems like that this one right here 00:04:20.000 --> 00:04:26.080 is not correct okay oh that's a through hole there you go that's why okay and 00:04:24.479 --> 00:04:31.520 what board is that this is the board with three chummies 00:04:28.160 --> 00:04:33.600 coming off of it three chummies okay 00:04:31.520 --> 00:04:37.199 those seem to have worked okay so we're good yeah 00:04:35.520 --> 00:04:41.199 either that are we just screwed in the wrong ones we'll find out later 00:04:39.199 --> 00:04:46.000 see that okay so it's kind of wedged in there so 00:04:43.520 --> 00:04:51.199 is that what we did it also seems like that we need 00:04:47.680 --> 00:04:51.199 some sort of a standoff right there 00:04:51.440 --> 00:04:57.360 i don't think so it's got it 00:04:54.639 --> 00:05:01.280 so this comes like up a little bit and then i think it goes 00:04:59.120 --> 00:05:05.600 kind of in there cause it was like stuck on there when it 00:05:02.800 --> 00:05:11.120 came out there like that uh yeah does that look right 00:05:07.759 --> 00:05:12.720 yeah i'm sure it's enough okay um 00:05:11.120 --> 00:05:17.120 yeah i'm calling that good okay so was this tightened down or no 00:05:14.720 --> 00:05:22.080 no but just be careful so then i wonder which screw goes in the 00:05:20.240 --> 00:05:25.520 left there okay so that one goes down all the way oh yeah that one goes down 00:05:23.919 --> 00:05:29.039 all the way okay cool it's either this one or this one oh and one's long and 00:05:27.199 --> 00:05:34.160 one's short yeah okay that's fine um addendum that's the 00:05:32.240 --> 00:05:38.880 identity the one by my index finger 00:05:36.320 --> 00:05:42.639 is the short one hey so the short one goes here 00:05:40.479 --> 00:05:46.639 yeah okay so we're so so we've we've put one thing back in yep 00:05:44.560 --> 00:05:50.240 so here's the nightmare thing it looks like 00:05:47.759 --> 00:05:55.600 all this is on there correctly so this heatsink basically screws directly into 00:05:53.680 --> 00:05:58.960 like the chip um and that's on there 00:05:57.680 --> 00:06:04.080 so i wonder if there's something that was supposed to go like 00:06:01.039 --> 00:06:06.319 between these two things nope no no this 00:06:04.080 --> 00:06:11.360 is the picture of having removed it okay yeah so the orientation is wrong so here 00:06:08.479 --> 00:06:14.400 i'm going to put it back like that um 00:06:12.800 --> 00:06:17.840 there's this weird gasket that 00:06:16.000 --> 00:06:23.199 is presumably going to come into play at some point and this other one um 00:06:21.600 --> 00:06:28.160 but yeah all this looks like stuff that we actually have not altered so that's 00:06:25.360 --> 00:06:31.840 the cooler for the actual sensor so that's going to be the most important 00:06:29.520 --> 00:06:35.120 thing for us to water cool yeah as we're making our way through the rest of this 00:06:33.120 --> 00:06:38.800 project given that's like pretty pinner i think 00:06:36.960 --> 00:06:42.800 that we can beat it pretty easily 00:06:40.080 --> 00:06:45.440 yeah it's a matter of like getting it in there though that's the 00:06:44.479 --> 00:06:51.360 problem okay so we need this board 00:06:48.960 --> 00:06:54.240 which is presumably the other side of this board those are going to fall out 00:06:53.199 --> 00:06:57.520 all of them oh yeah good call 00:06:56.560 --> 00:07:00.720 yep so have them fall out 00:07:00.840 --> 00:07:06.880 yay okay i've got these 00:07:04.360 --> 00:07:11.039 all right so that's confusing 00:07:09.280 --> 00:07:17.120 what is that do you see anything that looks 00:07:13.759 --> 00:07:19.520 like that is that it oh 00:07:17.120 --> 00:07:22.880 thank you past Linus sometimes you're not a complete ass 00:07:21.520 --> 00:07:27.360 this goes through here 00:07:25.919 --> 00:07:31.759 and then through that 00:07:30.080 --> 00:07:35.759 goes this way but this isn't threaded so something 00:07:34.240 --> 00:07:44.000 else is gonna have to go on the other side of this holy crap balls that's terrible news 00:07:41.039 --> 00:07:48.240 i think the screw that we put in here might not be long enough 00:07:46.080 --> 00:07:52.960 because look it barely comes through but wait no no it's fine no no it's fine 00:07:50.800 --> 00:07:57.039 because see this one is raised yes yes okay so that is exactly fine so 00:07:55.759 --> 00:08:02.000 then presumably that one right there goes through that so we've put the 00:07:59.199 --> 00:08:05.360 cooler back on whatever that was and a bunch of RAM 00:08:03.440 --> 00:08:08.400 chips uh should we tighten it down 00:08:07.120 --> 00:08:12.639 uh sure uh two down um 00:08:10.879 --> 00:08:18.879 lots to go so that does look like this but like 00:08:16.000 --> 00:08:22.240 what the crap oh yeah it does how would that work 00:08:20.560 --> 00:08:28.639 okay hold on don't panic i'm not panicking i am not oh no oh i 00:08:26.240 --> 00:08:33.599 think i think i this goes in like here 00:08:31.199 --> 00:08:36.640 right okay 00:08:35.200 --> 00:08:40.560 guys at home ladies gentlemen however hard this is 00:08:38.959 --> 00:08:44.720 for you to watch know that it's that much harder for us 00:08:42.320 --> 00:08:48.800 to be a part of there's it's a two-piecer 00:08:46.880 --> 00:08:52.240 oh geez well does that give us enough room i 00:08:50.640 --> 00:08:55.680 think so cool so then we'll just have to slip this 00:08:54.320 --> 00:09:01.600 back in all right that is a very bent piece of metal does that seem right that doesn't 00:08:59.600 --> 00:09:05.600 seem right there now it's straight ish you don't 00:09:03.440 --> 00:09:11.200 want to use my spudger nope my spudger's not good enough just crap my spider is 00:09:08.560 --> 00:09:15.760 identical to your spudger nope my sponger has we have history don't 00:09:13.600 --> 00:09:18.800 think of my spudger as like think of it as seasoned 00:09:17.120 --> 00:09:22.480 okay hey good work like 00:09:21.120 --> 00:09:27.040 high five not while you're holding that yeah this 00:09:24.480 --> 00:09:30.640 photo is really not great um 00:09:28.880 --> 00:09:35.200 so we know that okay all the screws are do seem to still 00:09:32.640 --> 00:09:40.399 be in which is good yeah i'm starting to have flashbacks now 00:09:37.279 --> 00:09:42.640 i think this is where shiz got real 00:09:40.399 --> 00:09:46.480 so this goes here 00:09:44.880 --> 00:09:50.800 does it looks like it's way closer in that picture um 00:09:48.720 --> 00:09:55.360 or like no there's a bottom piece there's a bottom piece that uh i think 00:09:53.600 --> 00:09:59.839 like here this one this is the bottom of the camera 00:09:57.600 --> 00:10:05.120 there's not a 90 degree turn right here yeah yeah no no it's like this here 00:10:02.560 --> 00:10:08.320 it goes like that ish 00:10:06.080 --> 00:10:13.680 like that and then this goes right here yeah okay is that does that look bueno 00:10:12.320 --> 00:10:17.360 uh yeah this is by far the most expensive puzzle 00:10:15.680 --> 00:10:21.680 that i have ever taken apart and put back together 00:10:20.240 --> 00:10:26.959 so it was loose actually it was loose 00:10:24.800 --> 00:10:32.320 when we were still taking off this piece so it's not unreasonable 00:10:30.720 --> 00:10:36.720 for this whole middle thing to just not quite attach yet yeah 00:10:34.720 --> 00:10:39.680 oh god um 00:10:38.160 --> 00:10:44.880 okay sorry i'm gonna watch a little faster here so here i'm taking off 00:10:42.079 --> 00:10:49.440 that uh that plastic plate that is on your right there 00:10:47.360 --> 00:10:52.480 so here's where i take off the gasket all right here's where i point out the 00:10:50.560 --> 00:10:56.959 gasket remove screws that hopefully are still 00:10:54.959 --> 00:11:01.279 on there so right yeah that's where that sticks 00:10:58.480 --> 00:11:03.839 up okay so here we go so that just falls away 00:11:04.560 --> 00:11:10.160 what are those little rubber chums we don't know 00:11:08.079 --> 00:11:14.720 oh it's this it's this okay is that right there yeah yeah 00:11:13.120 --> 00:11:19.440 okay so see this it's just loose 00:11:17.360 --> 00:11:22.640 okay yeah so here i'm just checking the 00:11:20.959 --> 00:11:26.480 orientation of this so this guy 00:11:24.399 --> 00:11:30.320 is in here like this 00:11:29.279 --> 00:11:34.079 yep so that's just like there but also just 00:11:32.399 --> 00:11:39.760 doesn't matter right now and then we can put our plastic thing on 00:11:37.920 --> 00:11:43.839 that's the one okay so we should take all the tape off first hey yeah here 00:11:42.560 --> 00:11:47.680 actually here can i hand you this piece of tape and can you remember 00:11:45.920 --> 00:11:52.000 the orientation oh wait that screw just stayed in uh okay 00:11:50.160 --> 00:11:58.720 what is this is this a thermal pad or what i can't quite tell 00:11:56.240 --> 00:12:02.320 oh wow that was really painless okay 00:12:01.040 --> 00:12:06.560 this needs to go under here 00:12:05.440 --> 00:12:12.000 yeah okay so we're looking for three ribbons the 00:12:09.920 --> 00:12:15.360 lsb that looks promising right there that 00:12:13.360 --> 00:12:20.560 looks very promising that yeah that looks like it okay good 00:12:17.519 --> 00:12:20.560 all right continue 00:12:22.079 --> 00:12:26.720 nervous laughter that's what the captions should say 00:12:25.200 --> 00:12:32.000 it would be so unfortunate to just drop a screw in through here please don't 00:12:28.959 --> 00:12:32.000 i'm gonna try not to 00:12:32.399 --> 00:12:39.920 it really doesn't help that these are all non-ferrous screws so they don't stick to our screwdrivers 00:12:37.519 --> 00:12:44.079 did you tighten all those up yep or i didn't tighten all of them yeah let's 00:12:42.320 --> 00:12:48.399 let's i think we're good to tighten those up 00:12:45.360 --> 00:12:50.320 and then i believe the next piece is 00:12:48.399 --> 00:12:55.760 that but on the other side and this one also has all the screws in 00:12:52.000 --> 00:12:57.360 place we actually did a pretty good job 00:12:55.760 --> 00:13:02.079 of uh keeping all this stuff together 00:12:59.680 --> 00:13:06.240 like this is going better than i 00:13:02.959 --> 00:13:07.360 probably expected yeah same 00:13:06.240 --> 00:13:11.600 okay time for the other side i think 00:13:10.639 --> 00:13:14.639 let me consult the footage 00:13:14.639 --> 00:13:20.800 so this right here is that 00:13:19.440 --> 00:13:26.800 um where is this red one right here is here 00:13:24.079 --> 00:13:31.920 yeah where does that go is this the board for this side 00:13:29.519 --> 00:13:34.160 it does look like it would go in there yeah 00:13:32.959 --> 00:13:41.519 but it also looks like that that would go that goes there that goes there that goes there that goes out yeah this is 00:13:37.519 --> 00:13:43.760 definitely okay yeah and we're in 00:13:41.519 --> 00:13:43.760 huh 00:13:46.399 --> 00:13:50.959 let's consult the footage shall we we're halfway there according to the footage 00:13:50.000 --> 00:13:55.440 anyway it looks like that this goes right uh here 00:13:53.839 --> 00:13:59.199 yeah i want to do it in the same order though just in case so i want to 00:13:57.760 --> 00:14:02.800 actually it looks like yes we're doing that uh 00:14:01.120 --> 00:14:06.000 that one yep so here do you want me to just hold on 00:14:04.399 --> 00:14:09.199 to those for now that's probably a good idea yeah 00:14:07.519 --> 00:14:12.800 i just tip the screws onto my hand yeah there we go 00:14:10.639 --> 00:14:17.279 okay yeah i'll just they're all the same so it doesn't matter 00:14:14.560 --> 00:14:22.720 wow that's all in what is this 00:14:19.519 --> 00:14:24.720 great question this is probably this 00:14:22.720 --> 00:14:28.560 yeah that seems likely okay i wonder where the other side goes uh presumably 00:14:26.880 --> 00:14:33.519 the board that good that goes on the other side i'm guessing i'm guessing okay 00:14:32.000 --> 00:14:37.040 oh this chip right here is probably what goes on that rando um 00:14:35.920 --> 00:14:40.959 heat pad yeah 00:14:39.920 --> 00:14:45.680 okay uh let me just check the order here i just don't want to do this out of order 00:14:44.320 --> 00:14:49.279 you don't have to uh what board am i looking at here 00:14:49.440 --> 00:14:56.399 this one okay okay so it looks like the next thing i'm pulling 00:14:53.680 --> 00:15:00.800 off here is actually the fans i don't know if that makes sense 00:14:58.639 --> 00:15:04.720 had i already removed the pcb from the other side 00:15:02.959 --> 00:15:09.440 let me have a look here where did these go like right here 00:15:06.240 --> 00:15:10.480 oh okay no i did the other pcb like way 00:15:09.440 --> 00:15:16.000 earlier so yeah it looks like the fans is the next thing that i do 00:15:14.079 --> 00:15:18.399 okay fan one fan two i'm guessing it doesn't matter which one plugs into 00:15:17.440 --> 00:15:25.360 which oh i see what's going on 00:15:21.760 --> 00:15:27.360 okay so this little wireless guy 00:15:25.360 --> 00:15:30.800 yeah that connects to right here you know what we should plug them in 00:15:28.720 --> 00:15:33.600 first i guess do you want to plug them in 00:15:32.160 --> 00:15:39.120 and then we'll manage them after which one do you think is the 00:15:35.920 --> 00:15:40.800 oh that looks like it goes there okay 00:15:39.120 --> 00:15:44.160 okay so what i'm going to do is i'm going to hold all the tension off the 00:15:42.240 --> 00:15:48.079 cord and then you put it in yeah 00:15:45.760 --> 00:15:52.079 okay okay so you'll have to line it up and 00:15:50.079 --> 00:15:56.320 make sure it's actually on there i think it is though yeah i think there 00:15:53.680 --> 00:15:59.839 we go yeah we got it so these must be external screws yeah it 00:15:58.639 --> 00:16:04.320 must be i would say it's those big fat ones yeah 00:16:02.240 --> 00:16:07.040 i'm guessing these yeah should we just go for it let's go for it 00:16:05.839 --> 00:16:12.000 all right it's gotta be nothing else has threading that even moves closer and it's also the 00:16:10.399 --> 00:16:15.360 one that has the most crap on it there's a lot of crap around these holes it is 00:16:13.519 --> 00:16:21.839 amazing how tightly this is sandwiched like i am holding this together 00:16:18.880 --> 00:16:24.079 this is one compact okay 00:16:26.000 --> 00:16:34.240 it's kind of starting to look like a camera again it's kind of a bucket of parts 00:16:31.440 --> 00:16:38.079 oh no so i oh so i disassembled it in a really weird order 00:16:36.399 --> 00:16:42.240 okay so i think even though that's not the order that i did it in last time we 00:16:39.839 --> 00:16:45.920 should put this pcb on now all right 00:16:43.360 --> 00:16:48.720 okay so where did the screws for that go oh these must be them are there four by 00:16:47.440 --> 00:16:52.560 any chance five five please send me two four five 00:16:50.639 --> 00:16:56.000 yep perfect 00:16:54.399 --> 00:17:01.600 now there will be no extra screws absolutely zero zero extra screws we are 00:16:58.800 --> 00:17:05.199 professionals we hopefully passed Linus helpfully put all the screws where they 00:17:03.120 --> 00:17:09.280 go for us it's starting to really look very camry 00:17:07.439 --> 00:17:12.400 now yeah uh wow that's a lot of screws on this 00:17:11.280 --> 00:17:18.640 one yeah but then again this is where all the weight of the camera and the entire rig 00:17:16.079 --> 00:17:22.559 is uh going to be resting okay so 00:17:20.400 --> 00:17:26.240 we have one screw left it's right there 00:17:24.160 --> 00:17:29.679 wait uh oh yeah oh 00:17:27.839 --> 00:17:31.360 what is this that looks like a super special 00:17:31.360 --> 00:17:38.780 screw yep store lock screw 00:17:36.320 --> 00:17:40.480 oh warranty's fine now lordy 00:17:40.480 --> 00:17:44.480 store lock screw 00:17:44.799 --> 00:17:50.799 what does the lock screw look like so Jake just explained what the back 00:17:48.799 --> 00:17:53.760 focus lock screw does you use it to lock the sensor in place if you're 00:17:52.240 --> 00:17:58.160 transporting the camera or something like that so you don't technically 00:17:56.320 --> 00:18:03.440 need it in there um 00:18:00.080 --> 00:18:06.080 i mean it's probably ideal but it also 00:18:03.440 --> 00:18:09.440 is not necessarily like marked like that because it's dangerous 00:18:08.160 --> 00:18:15.840 to have it out or something like that it's marked like that so it's easy to find because it is intended to be user 00:18:12.840 --> 00:18:17.200 adjustable okay all right 00:18:15.840 --> 00:18:21.200 so you just want you keep wanting to put this plate on yeah okay you really want 00:18:19.200 --> 00:18:25.360 to put that plate on okay now we put this gem on 00:18:23.600 --> 00:18:29.520 seems fine so make sure you have it lined up because there's that 00:18:27.600 --> 00:18:32.559 connector down there oh okay that seems pretty lined up 00:18:32.559 --> 00:18:38.720 we're really close yep so this 00:18:37.360 --> 00:18:41.840 i don't know where does this look like it goes 00:18:40.400 --> 00:18:45.760 kind of looks like it goes here but that doesn't make any sense other way around 00:18:44.160 --> 00:18:49.039 maybe yeah yeah 00:18:47.679 --> 00:18:52.559 good call i'm guessing that this 00:18:51.039 --> 00:18:57.760 uh is it this one mine has three holes or three screws all 00:18:55.039 --> 00:19:02.640 right i wonder where that goes i think probably along this side that's my guess 00:19:00.160 --> 00:19:05.600 i just don't see where oh unless is this covering up a 00:19:04.480 --> 00:19:08.480 weight is that an extra screw 00:19:09.039 --> 00:19:15.840 i think we found it oh wait no because we're too short oh 00:19:13.520 --> 00:19:20.320 okay so let's hold on to that for now um and then this guy 00:19:18.880 --> 00:19:26.720 is gonna go wait what the crap i wonder if this is 00:19:22.080 --> 00:19:30.240 orientation agnostic i feel like it is 00:19:26.720 --> 00:19:30.240 we have two extras 00:19:30.400 --> 00:19:35.280 oh dang 00:19:33.600 --> 00:19:39.200 okay so we went and we put all the screws in 00:19:37.600 --> 00:19:45.039 but we didn't realize that there was just a little thing that goes on here 00:19:42.400 --> 00:19:50.120 that was already pre-loaded with all the screws 00:19:46.080 --> 00:19:50.120 that it needed under it 00:19:52.000 --> 00:19:59.840 it okay back focus lock screw found 00:19:57.200 --> 00:19:59.840 confirmed 00:20:00.400 --> 00:20:08.960 there it is boom okay fun fact alex um all of these black 00:20:06.799 --> 00:20:13.679 skinny screws are not the same oh that's fun yep some of them are 00:20:11.919 --> 00:20:17.440 threaded more differently than the other ones come on out baby 00:20:16.080 --> 00:20:21.520 yeah get out thank you so i need one of the thicker 00:20:19.440 --> 00:20:24.960 ones for this that's probably why i had two of them in 00:20:23.600 --> 00:20:27.600 tape separately all right that's it 00:20:27.760 --> 00:20:32.480 maybe they are all the same then i don't know i can't tell 00:20:30.960 --> 00:20:37.039 it's hard to say this one looks kind of longer doesn't it wait 00:20:35.520 --> 00:20:40.799 those are hacks as well i should really start you or you could really start 00:20:38.640 --> 00:20:43.760 using a hex driver for this so wait this one right here is 00:20:41.919 --> 00:20:46.640 definitely torx though which one this one 00:20:45.600 --> 00:20:50.400 oh well that's interesting because that's 00:20:48.960 --> 00:20:54.720 definitely hex there's torque seasons or torques 00:20:53.039 --> 00:20:59.440 torques x so i have two hexes i think they're all 00:20:57.520 --> 00:21:03.679 torxes no this one's hex well that one's hex but 00:21:00.720 --> 00:21:07.679 what about these other ones down here one story stork stores you said twerks 00:21:06.159 --> 00:21:12.159 three times but i only see two screws yeah no i just said that an extra time 00:21:10.240 --> 00:21:15.760 okay i mean at this point do we just give up 00:21:14.400 --> 00:21:20.880 and just throw it together they're all the same length like 00:21:18.159 --> 00:21:26.480 okay so i guess we're either done or 00:21:23.360 --> 00:21:26.480 disappointing yeah 00:21:28.240 --> 00:21:32.960 last screw ladies and gentlemen 00:21:31.600 --> 00:21:37.919 and this is the one that i think the threads are just stripped okay whatever 00:21:35.679 --> 00:21:41.039 yeah okay not gonna not gonna care about that because it's on here good enough 00:21:39.840 --> 00:21:47.600 okay hit me so this guy just screws onto here yep 00:21:46.000 --> 00:21:50.480 and then do we have a display right are those uh let's just see if the led turns 00:21:49.520 --> 00:21:57.760 on so you just want to see an led wow you have very little confidence in this 00:21:54.640 --> 00:22:00.559 project hey david i i'm very impressed 00:21:57.760 --> 00:22:04.159 with what you guys have done so far okay 00:22:02.799 --> 00:22:07.120 um are we ready yeah it's the button on the 00:22:06.080 --> 00:22:13.440 right side so hold that 00:22:09.520 --> 00:22:16.000 okay here we go ladies and gentlemen 00:22:13.440 --> 00:22:19.039 oh that's fine we've got the fans on normally though 00:22:17.280 --> 00:22:22.720 we intake where's the led supposed to be okay we've got power 00:22:24.200 --> 00:22:31.919 oh yeah i wanna see an image Jake 00:22:29.360 --> 00:22:35.360 show me that beautiful face it's gonna be the first thing this 00:22:33.120 --> 00:22:37.679 camera ever sees okay 00:22:39.200 --> 00:22:45.039 so we have no reason to believe at this 00:22:42.720 --> 00:22:49.600 moment then that it doesn't work 00:22:46.720 --> 00:22:49.600 that was stressful 00:22:51.440 --> 00:22:57.679 all right now we need to water cool it yeah 00:22:55.679 --> 00:23:01.440 just completely disassemble it yeah yeah but we need to do some pre-testing first 00:22:59.440 --> 00:23:07.520 so brandon yeah what i was kind of thinking is i would like you to do some 00:23:05.520 --> 00:23:13.120 pre-benchmarking on it and i want to know how loud it is 00:23:10.159 --> 00:23:16.640 both at idle and under more strenuous conditions 00:23:14.400 --> 00:23:21.679 we want to know how hot it gets and then we also want to have some test footage 00:23:19.120 --> 00:23:26.159 ideally in highlight so some with with adequate lighting and 00:23:23.840 --> 00:23:31.360 some in a low light scenario that we can then compare against our image when we 00:23:28.880 --> 00:23:35.840 are done this whole project squarespace gives you the tools you need 00:23:33.280 --> 00:23:39.919 to build and grow your online presence they've got tons of templates spanning a 00:23:37.919 --> 00:23:45.760 large variety of categories so whether you need a website for your blog or your 00:23:42.799 --> 00:23:49.360 wedding or your business squarespace has got you covered you can get a domain 00:23:47.840 --> 00:23:53.760 quickly through squarespace if you need one or you can port over an existing one 00:23:51.520 --> 00:23:58.640 you already own and you can get started with a free no commit 14 day trial by 00:23:56.799 --> 00:24:02.880 going to squarespace.com forward slash LTT and if you use our 00:24:00.880 --> 00:24:07.360 link you'll actually get 10 off your first purchase so go try it out 00:24:05.440 --> 00:24:13.600 so thanks for watching guys uh if you disliked this video then uh 00:24:11.440 --> 00:24:16.000 i guess you were rooting against us um but if you liked it hit like get 00:24:14.720 --> 00:24:19.520 subscribed or consider checking out where to buy the stuff we feature the link in the video description do we have 00:24:18.400 --> 00:24:24.000 like a red camera down there i don't think we have a red affiliate link 00:24:21.679 --> 00:24:28.799 yeah we got pia we got the LTT Store so yeah check out some check out some merch 00:24:25.840 --> 00:24:32.880 we got the brand new hard drive shirt down there 00:24:30.000 --> 00:24:35.360 it's uh it looks pretty sick if i do say so myself 00:24:34.080 --> 00:24:40.400 not that i designed it myself or anything and then of course stealth hoodie um 00:24:38.720 --> 00:24:44.080 we are probably going to sell out of the first shipment of them fairly soon we 00:24:42.480 --> 00:24:49.120 did get more ordered but if you want to make sure that you get one right away then head to lttstore.com 00:24:47.520 --> 00:24:54.640 i believe we still have all sizes in stock it's got the phone pocket 00:24:52.240 --> 00:25:01.679 pocket phone pocket boom so it even fits large 00:24:57.600 --> 00:25:03.039 phones like an iphone 10s 10s max 00:25:01.679 --> 00:25:08.440 note9 doesn't come out yep 00:25:05.440 --> 00:25:08.440 lttstore.com