WEBVTT

00:00:00.040 --> 00:00:07.000
we're here at Le and Le's booth at computex 2024 where they have a bunch of

00:00:04.000 --> 00:00:09.800
RGB loads more RGB and my favorite case

00:00:07.000 --> 00:00:13.440
here has none and also it's kind of cheap thanks to lean Lee for sponsoring

00:00:11.559 --> 00:00:18.119
this video and this thing is freaking incredible just while you look at this

00:00:16.199 --> 00:00:23.760
think about how much you would imagine that it costs given that there's Walnut

00:00:20.600 --> 00:00:27.880
all around right here and

00:00:23.760 --> 00:00:29.640
270 mm fans now what's really fun about

00:00:27.880 --> 00:00:34.800
these is if you look up at the top and press button

00:00:32.000 --> 00:00:39.559
Boop they can reverse directions just like that now this isn't so that it just

00:00:36.960 --> 00:00:43.559
blows air on my face even though that is really quite a nice feature but it's so

00:00:41.879 --> 00:00:49.079
that they can get the dust off the back of the impellers so you've probably seen

00:00:45.800 --> 00:00:51.199
this before where as your fan gets dirty

00:00:49.079 --> 00:00:56.160
all of the Dust builds up right back here along the edge and by just simply

00:00:54.280 --> 00:01:00.359
pressing this button here once it starts back up oh come on dude oh I might have

00:00:57.920 --> 00:01:04.000
done it the wrong way there we go but by doing that it can get rid of the dust

00:01:02.039 --> 00:01:08.360
that's back there and your fans can look very nice and clean what's also really

00:01:06.200 --> 00:01:12.520
cool is that they did a whole bunch of testing to find out that the best spot

00:01:10.520 --> 00:01:17.280
to put your dust filters is actually on the back of the fans going back to the

00:01:14.799 --> 00:01:21.200
whole the dust builds up at the back of your fan thing these right here are

00:01:19.040 --> 00:01:27.520
super easy to remove so you can just come in here rip it out and there you go

00:01:24.680 --> 00:01:31.360
of course this being a case made in 2024 it has back to front support all the

00:01:29.360 --> 00:01:35.840
connectors are are nice back here and also if you have an eatx motherboard it

00:01:33.520 --> 00:01:42.479
will fit in here as well but the thing that I like the most about the 217 is

00:01:38.759 --> 00:01:47.320
its price this right here with 2 170 mm

00:01:42.479 --> 00:01:50.159
fans and a 140 in the back is just

00:01:47.320 --> 00:01:55.200
$119 I was really surprised that it came in that low with that much stuff on it

00:01:53.000 --> 00:02:00.439
and especially like you're normally paying such a large tax for walnot on a

00:01:58.520 --> 00:02:06.320
case it's really nice to see something that's just nice and classy for not too

00:02:03.680 --> 00:02:10.879
too much but maybe you're not all that classy but that doesn't mean that your

00:02:08.560 --> 00:02:16.879
life needs to be difficult this right here is their new WLS system Wireless

00:02:15.239 --> 00:02:22.640
which makes a lot of sense because their controller is now super simple I know

00:02:20.360 --> 00:02:27.599
that you guys have spent so much time with a whole bunch of wires getting

00:02:25.360 --> 00:02:32.959
crammed into the back of your computer case and all the UR

00:02:30.080 --> 00:02:37.080
it's all just this now that that's all that it is now you can just plug this

00:02:35.000 --> 00:02:41.519
into the back of your case like you can see right

00:02:38.840 --> 00:02:46.319
here or you can just connect it to your motherboard header with a little

00:02:43.040 --> 00:02:48.560
internal doad and then you just stuff it

00:02:46.319 --> 00:02:52.840
back here don't have to worry about any wires how this system works is we have

00:02:51.080 --> 00:02:58.040
our controller and it wirelessly connects to this guy right here which

00:02:55.280 --> 00:03:03.000
magnetically attaches to your fans now all of the Power for your RGB and fans

00:03:00.720 --> 00:03:08.200
is just delivered with the 12 VTS that's supplied to your fans for power we don't

00:03:05.239 --> 00:03:12.480
even have pwm signals on our fans here cuz that is all done through software

00:03:10.400 --> 00:03:17.080
although if you really want to control your fan speed in the Motherboard BIOS

00:03:14.920 --> 00:03:22.720
you can connect the controller to the header right here since we only have 12

00:03:19.840 --> 00:03:28.799
volts going into the fan the system is a little bit complicated so inside every

00:03:25.760 --> 00:03:30.720
single fan we have a 12vt to 5vt

00:03:28.799 --> 00:03:36.239
converter and that's allows us to run the RGB over just the fan power and all

00:03:34.400 --> 00:03:40.040
of this works quite well but the thing that's interesting is it doesn't

00:03:37.879 --> 00:03:44.159
increase the price there is more complexity but you don't have to worry

00:03:42.080 --> 00:03:49.599
about any of that and because Le and Lee is saving money on all of the connectors

00:03:46.959 --> 00:03:53.319
and the wires and all of the pins for all of those connectors that would be on

00:03:51.280 --> 00:03:56.599
the controller the price is actually exactly the same as the last generation

00:03:55.480 --> 00:04:00.439
even though they do have to have wireless controllers and receivers

00:03:58.519 --> 00:04:05.040
throughout the whole thing another benefit of this new system is that if

00:04:02.439 --> 00:04:10.959
you want to have an LCD screen in your fans in the past you would have to have

00:04:07.840 --> 00:04:13.000
only LCD fans all Daisy chained together

00:04:10.959 --> 00:04:19.479
for it to work properly but now you're able to have non LCD fan LCD fan and

00:04:16.479 --> 00:04:21.359
then not an LCD fan or any combination

00:04:19.479 --> 00:04:26.400
of those should you so choose so you don't have to just completely ball out

00:04:23.880 --> 00:04:30.680
on three LCD fans and maybe you just get one in the center like right here this

00:04:28.600 --> 00:04:35.039
wireless system also works for strammer cables and you can have up to eight

00:04:32.840 --> 00:04:40.520
receivers connected at once and each receiver can do up to four fans for a

00:04:37.160 --> 00:04:42.120
total of 32 fans that's quite a few

00:04:40.520 --> 00:04:47.400
enough about RGB though let's look at another case that uh it does have RGB

00:04:44.919 --> 00:04:51.600
but has a bunch of other cool things too that uh okay we can't really see it cuz

00:04:49.880 --> 00:04:56.720
the GPU is in away one sec this is the landan cool 207 and what's really neat

00:04:54.479 --> 00:05:02.520
about it is that the power supply has been moved up to the front of the case

00:04:59.479 --> 00:05:05.160
now what this allowed them to do is drop

00:05:02.520 --> 00:05:10.320
some fans down in the bottom and move them over closer to the motherboard so

00:05:07.520 --> 00:05:14.880
they can blow air up into the GPU in a way that's actually useful normally they

00:05:12.720 --> 00:05:19.800
would just be blowing kind of past it what this also allowed them to do is

00:05:17.039 --> 00:05:24.400
drop the motherboard down below the top of the power supply which allowed them

00:05:21.919 --> 00:05:28.919
to make the whole case more compact than usual this is a size of a case that

00:05:26.639 --> 00:05:34.440
would normally be reserved for like a matx build but they're able to get a

00:05:30.919 --> 00:05:36.120
full ATX board in here and it's really

00:05:34.440 --> 00:05:42.000
not that large here it is compared to the 217 now if you do put a large GPU

00:05:38.960 --> 00:05:44.400
into this they have a bracket right here

00:05:42.000 --> 00:05:49.560
to hold it up or if you want to Mount Your GPU vertically they just have a

00:05:47.240 --> 00:05:53.720
very simple block they they just give you this piece of rubber it's wicked the

00:05:51.960 --> 00:06:00.400
most wickedest thing about the Lan cool 207 though is the price with 2 140 mm

00:05:57.960 --> 00:06:06.560
fans that are RGB in the front two inverted 120s down here it's 80 bucks

00:06:04.440 --> 00:06:11.319
that's really quite good well maybe have a little bit more money which is where

00:06:08.400 --> 00:06:16.360
the 01 Vision compact comes in now in the past the vision compact the thing

00:06:14.000 --> 00:06:23.840
that was really fancy about it were the three glass panels but maybe you don't

00:06:19.360 --> 00:06:27.240
want three glass panels you can now

00:06:23.840 --> 00:06:30.560
have mesh on the top as well if you so

00:06:27.240 --> 00:06:32.520
choose for extra Cooling what also is

00:06:30.560 --> 00:06:38.880
really cool about this is that they have an absolutely massive grommet right here

00:06:35.919 --> 00:06:43.880
that you can Chuck your entire aiio cooler through so that you can hide the

00:06:41.160 --> 00:06:48.840
tubes back through it and have a super clean look now the vision compact will

00:06:46.800 --> 00:06:53.759
come with the glass panel and the mesh panel at just

00:06:51.039 --> 00:06:57.840
$119 which is really quite good but maybe you want to hide the tubes to your

00:06:55.360 --> 00:07:03.680
AIO in a different way which is whether a hydros shift AI comes in what they

00:07:01.199 --> 00:07:09.919
have right here is a little channel for the tubes so they can come along the

00:07:06.599 --> 00:07:13.080
back side of the radiator and be almost

00:07:09.919 --> 00:07:16.160
completely invisible in your system wow

00:07:13.080 --> 00:07:18.520
look at those mirror fans too looks so

00:07:16.160 --> 00:07:24.000
freaking nice now because the bend radius here has to be super tight they

00:07:20.960 --> 00:07:25.879
couldn't use normal tubes for an aiio

00:07:24.000 --> 00:07:30.720
and these are instead squirrel tubes that you would normally use in a server

00:07:27.560 --> 00:07:32.759
so you can bend it really hard and the

00:07:30.720 --> 00:07:39.280
internal diameter of the tube is going to remain the same for nice

00:07:36.560 --> 00:07:44.039
reliability speaking of reliable they have this new connector for their 12vt

00:07:41.720 --> 00:07:48.560
high power which uses soldered connections down here instead of push

00:07:46.400 --> 00:07:53.639
pins now what this allows is that if you insert it a whole bunch of time with a

00:07:50.680 --> 00:07:58.599
push pin connector it can over time move and knock connect all the way and burn

00:07:56.000 --> 00:08:03.440
your house down not very desirable but by soldering all of the connections they

00:08:00.479 --> 00:08:07.680
have done 50 insertions and seen no increase in resistance using these guys

00:08:05.560 --> 00:08:11.840
right here and they also have had a similar connector system on their latest

00:08:09.759 --> 00:08:15.919
streammer cables and have not had a single RMA because of that failing also

00:08:14.360 --> 00:08:20.759
we have a bunch of power supplies right here 1300 W 1,000 watt all the way down

00:08:18.560 --> 00:08:25.800
to 850 these ones are all platinums they have these really cool connectors on the

00:08:23.039 --> 00:08:30.080
side we have USB hub right here so you can do one motherboard signal right

00:08:27.960 --> 00:08:33.959
there to your USB goes out to four if you have a whole bunch of RGB devices

00:08:32.640 --> 00:08:39.599
they also have a couple of power supplies over here 650 to 850 those are

00:08:36.880 --> 00:08:44.519
all Golds and they are very very close to turning off the power in here so we

00:08:41.919 --> 00:08:47.959
are going to wrap up this video so huge thanks for watching this video and huge

00:08:46.240 --> 00:08:51.680
thanks to lean Lee for sponsoring it check out everything that we have talked

00:08:49.519 --> 00:08:55.480
about in the link down below and just have a great old day see you later