1
00:00:00,160 --> 00:00:07,560
it's time for my first handy Tech under 100 and this time we're going to get

2
00:00:05,000 --> 00:00:12,540
hard and sticky so come along and let's fix your pipe manage your cables and

3
00:00:10,000 --> 00:00:15,610
then cool you off at the

4
00:00:20,160 --> 00:00:26,519
end the Arya headphones from Phoenix come complete with a cardioid clip mic

5
00:00:24,840 --> 00:00:31,039
and acoustic Chambers constructed entirely of Japanese Pinewood check it

6
00:00:29,039 --> 00:00:35,800
out in the link below starting us off with number one is fiber

7
00:00:33,680 --> 00:00:41,280
fix it's a resin product that can bond to metal and wood that's available in a

8
00:00:38,160 --> 00:00:43,320
patch a heat wrap and a repair wrap

9
00:00:41,280 --> 00:00:47,640
that's the one that I bought it claims that it can Harden like steel sounds

10
00:00:45,440 --> 00:00:52,440
great I'm in so to put it to the test I cut through a table leg support with an

11
00:00:50,120 --> 00:00:56,239
angle grinder then I followed the fiber fix instructions by preparing the

12
00:00:54,079 --> 00:01:00,440
surface around the brake by sanding it down with the included sandpaper a

13
00:00:57,840 --> 00:01:05,519
little bit and I included some in just to make it go a bit faster then I put on

14
00:01:03,199 --> 00:01:10,080
my gloves and dunked the fiberfix wrap underwater for about 5 Seconds now

15
00:01:08,000 --> 00:01:14,360
fiberfix doesn't adhere the same way traditional tape does I had to wrap the

16
00:01:12,280 --> 00:01:18,880
first few layers carefully making sure they were at least in the right location

17
00:01:16,840 --> 00:01:23,439
then with subsequent layers I cranked it in a little bit to make sure that it was

18
00:01:20,840 --> 00:01:28,680
all tight following this I wrapped some of the included vinyl strips on top of

19
00:01:26,320 --> 00:01:33,680
that also cranking those down and let it sit for about 15 minutes to cure before

20
00:01:31,240 --> 00:01:36,000
removing the vinyl then it was time to test

21
00:01:39,560 --> 00:01:46,799
it okay so it did come off but that's

22
00:01:44,280 --> 00:01:51,200
actually because I deformed the entire pipe against The Rock the problem here

23
00:01:49,320 --> 00:01:57,039
wasn't the strength or rigidity of the fiber fix it was its ability to adhere

24
00:01:54,399 --> 00:02:00,360
to the pipe which I did score quite a bit although admittedly I didn't get all

25
00:01:59,079 --> 00:02:06,880
of the paint off but the fact of the matter is I can still pull the remaining still unbroken

26
00:02:04,719 --> 00:02:12,280
part out of the end I would suggest using fiberfix along with some type of

27
00:02:09,959 --> 00:02:17,000
super glue or Gorilla Glue depending on the project I'm very happy with its

28
00:02:14,519 --> 00:02:19,720
strength but I'm not a huge fan of its adherence watch this real quick you're

29
00:02:18,640 --> 00:02:27,400
not going to see this completely on camera

30
00:02:22,120 --> 00:02:27,400
but there I can just pull it right

31
00:02:27,800 --> 00:02:34,560
out next up we have item number two

32
00:02:30,879 --> 00:02:36,879
sugru its creators call it moldable glue

33
00:02:34,560 --> 00:02:41,800
and after taking however much you need out of the package you can stick it to

34
00:02:39,120 --> 00:02:47,920
loads of different things like Ceramics glass metal and wood along with most

35
00:02:45,120 --> 00:02:54,280
Plastics and even Fabrics you then have 30 minutes to fix Bond cushion replace

36
00:02:51,280 --> 00:02:57,159
mold seal and stick things together then

37
00:02:54,280 --> 00:03:03,319
after waiting 24 hours sugaru will turn into a durable flexible silicone rubber

38
00:03:00,440 --> 00:03:07,920
that in the vast majority of cases will stay stuck permanently unless you decide

39
00:03:05,680 --> 00:03:13,640
to remove it sugru can stand up to some pretty intense conditions as well it's

40
00:03:10,519 --> 00:03:17,799
temperature resistant up to 180° C or

41
00:03:13,640 --> 00:03:20,319
down to 50° CSUS its dishwasher safe

42
00:03:17,799 --> 00:03:26,200
weatherproof and even resist the effects of the ever dreaded salt water it's

43
00:03:23,280 --> 00:03:31,280
shock resistant UV resistant and it's even electrically insulating below 24

44
00:03:28,879 --> 00:03:35,120
volts acceptable for small electronics projects I had John use it for a number

45
00:03:33,680 --> 00:03:40,360
of things including some cable management cable strengthening mounting

46
00:03:37,319 --> 00:03:42,519
and SSD in a computer case and more if

47
00:03:40,360 --> 00:03:48,120
you'd like to see a huge range of stuff that sugu can do check out their Tech

48
00:03:44,760 --> 00:03:50,480
DIY outdoors and general tips sections

49
00:03:48,120 --> 00:03:56,720
on their site I was originally going to make a video on Channel Super Fun about

50
00:03:52,720 --> 00:03:59,120
this stuff way back in 2014 but ended up

51
00:03:56,720 --> 00:04:03,560
using it all before we got around to it uh it's pretty great which brings us to

52
00:04:01,239 --> 00:04:07,560
our third and final handy sticky Product Arctic Silver thermal adhesive this

53
00:04:05,799 --> 00:04:12,319
stuff is the real deal I mean it includes a warning stating that yes it

54
00:04:09,760 --> 00:04:17,400
is a permanent adhesive components that you attach with Arctic Silver thermal

55
00:04:14,159 --> 00:04:20,600
adhesive will stay attached forever your

56
00:04:17,400 --> 00:04:24,040
7 G of thermal adhesive is split in 3.5

57
00:04:20,600 --> 00:04:26,360
G Parts across syringe a and syringe B

58
00:04:24,040 --> 00:04:31,160
you'll need to mix these parts like an epoxy in equal 1:1 ratios on some sort

59
00:04:29,560 --> 00:04:35,440
of tray that you don't mind throwing away after mixing you can use the

60
00:04:33,000 --> 00:04:39,600
included mini spatula to apply the solution to your heat sink or chip or

61
00:04:37,680 --> 00:04:44,080
whatever you're trying to stick together wait for it to cure and voila

62
00:04:41,800 --> 00:04:50,600
permanently adhered thermal transfer with solid performance to boot it's

63
00:04:46,320 --> 00:04:53,840
Arctic Silver right so it has 62 to 65%

64
00:04:50,600 --> 00:04:55,280
silver content by weight pretty intense

65
00:04:53,840 --> 00:04:59,440
you can learn more about why this matters here but why would you want this

66
00:04:57,960 --> 00:05:03,759
well if you're doing a mod to a graphics car which will remove the cooling on a

67
00:05:01,280 --> 00:05:07,680
few chips or just working on a smaller Electronics project it can often be

68
00:05:05,639 --> 00:05:11,560
useful to be able to add heat sinks in places where there aren't holes to mount

69
00:05:09,520 --> 00:05:16,080
them by traditional means and since thermal stickers perform worse and don't

70
00:05:13,759 --> 00:05:22,120
hold very well under any kind of weight load and drilling through the PCB

71
00:05:18,600 --> 00:05:24,039
randomly is obviously a terrible idea

72
00:05:22,120 --> 00:05:28,280
this is better than nothing which brings us finally to the full disclosure part

73
00:05:26,199 --> 00:05:31,639
of these handy Tech episodes lonus originally included this section since

74
00:05:29,919 --> 00:05:36,800
they're structured more as a recommendation to buy with links below

75
00:05:34,080 --> 00:05:41,120
to Amazon versus a review I personally think this was a wise choice so without

76
00:05:38,520 --> 00:05:45,280
further Ado item one the fiberfix was purchased by me to use for work Teran

77
00:05:43,639 --> 00:05:49,479
suggested we get it when lonus broke the trailer and while he already found a

78
00:05:47,360 --> 00:05:54,319
solution for that it seemed like a great idea to have some around in the future

79
00:05:51,360 --> 00:05:58,800
for just any whatever use case item two the sugu was sent to us by sugru

80
00:05:56,840 --> 00:06:02,000
themselves for use around the office and we told them since we already had

81
00:06:00,720 --> 00:06:05,479
experience with the product a couple years ago that we were pretty sure it

82
00:06:03,880 --> 00:06:09,960
would make its way into a video at some point this is that video item three the

83
00:06:07,800 --> 00:06:14,440
thermal adhesive was purchased by lonus to put the dam 6700k back together again

84
00:06:13,120 --> 00:06:18,039
because it's been apart for a really long time and the tube of thermal

85
00:06:16,400 --> 00:06:23,599
adhesive that he had from like 6 years ago happened to dry out if you're not a

86
00:06:21,319 --> 00:06:27,800
member of Dollar Shave Club and you join today you will get your first month of

87
00:06:25,440 --> 00:06:32,560
razors for free they will deliver these razors continually if you stay a

88
00:06:29,599 --> 00:06:36,880
subscriber to your door directly every month membership means that you can have

89
00:06:34,400 --> 00:06:40,560
a fresh shave anytime you want and you'll get a first class shave when you

90
00:06:38,240 --> 00:06:44,440
use their executive blade especially when paired with their Dr Carver's shave

91
00:06:42,759 --> 00:06:48,560
butter which goes on clear so you can see actually what hair you're shaving at

92
00:06:46,599 --> 00:06:52,720
that point in time which is pretty helpful they ship to the US Canada and

93
00:06:51,080 --> 00:06:57,039
Australia so head over to dollarshaveclub.com Linus and give them

94
00:06:54,479 --> 00:07:01,400
a try for free all right guys thanks for watching this video hopefully you liked

95
00:06:58,400 --> 00:07:02,759
my first debut to Handy Tech if you did

96
00:07:01,400 --> 00:07:08,680
let me know in the comments down below hit that like button get subscribed all that fun stuff if you hated it dislike

97
00:07:07,160 --> 00:07:12,360
that's that's fine also if you're interested in any of these things you

98
00:07:10,240 --> 00:07:17,360
can find them at the Amazon links down below you can check out our shirt store

99
00:07:14,720 --> 00:07:26,759
also down below and uh check out this video which is the third handy Tech ever

100
00:07:21,960 --> 00:07:26,759
to go on YouTube I'll see you next time