WEBVTT

00:00:00.599 --> 00:00:06.919
so today we've got a kit of Corsair's Dominator GT memory and I think it

00:00:04.720 --> 00:00:13.080
includes a fan but I'm actually not 100% sure so let's get to unboxing this this

00:00:09.000 --> 00:00:15.679
is a 4 gig kit and it's I5 ready so that

00:00:13.080 --> 00:00:21.480
means that Corsair has optimized it for operation with the I5 and the LGA 1156

00:00:18.800 --> 00:00:26.359
i7 so here we go here's the uh the Dominator GT airflow fan but let's have

00:00:23.400 --> 00:00:32.680
a look at the modules first so like all Dominator GT modules you can see that

00:00:29.599 --> 00:00:35.680
we've got got a black heat spreader with

00:00:32.680 --> 00:00:37.640
a red top piece on top so it looks very

00:00:35.680 --> 00:00:42.079
very sharp once it's installed in your system so again the black white and red

00:00:39.960 --> 00:00:46.920
theme on the back it's a very very Canadian actually of all things and then

00:00:45.320 --> 00:00:50.719
the other one is again of course identical so let's have a look at the

00:00:48.600 --> 00:00:57.160
included fan this is the dhx plus airflow GT so get this baby open so this

00:00:54.719 --> 00:01:00.719
Clips to the sides of your of your dim slots and then it installs right over

00:00:59.239 --> 00:01:06.360
top of your memory like that it's got a little sleeved three pin connector there

00:01:03.320 --> 00:01:08.720
you can see these are two 60 mm fans and

00:01:06.360 --> 00:01:13.400
apparently they're a lot quieter than the old actually well they are a lot

00:01:10.600 --> 00:01:17.520
quieter than the older style round fans that spun quite fast and were actually

00:01:15.400 --> 00:01:23.240
quite loud they were only 40 mm so here's your mounting hardware so you got

00:01:19.240 --> 00:01:27.240
a four screws which you use to mount

00:01:23.240 --> 00:01:29.040
these right about here so there you go

00:01:27.240 --> 00:01:31.880
you just screw them in from the top and then the clips are on the side those

00:01:30.280 --> 00:01:35.560
mount on to the clips for retaining the memory modules on your motherboard and

00:01:34.320 --> 00:01:39.439
there you have it you've installed the Dominator GT airflow fan anyway thank

00:01:38.320 --> 00:01:43.880
you for checking out my blog on Corsair's Dominator GT modules