WEBVTT

00:00:16.400 --> 00:00:21.920
hello youtube today we're going to be sharing with you

00:00:19.439 --> 00:00:26.080
our asmr pc build guide sponsored by e-boss

00:00:23.039 --> 00:00:28.160
the brand for demand and sennheiser's

00:00:26.080 --> 00:00:34.000
previous collaborative effort to build high-end gaming audio solutions

00:00:30.640 --> 00:00:36.399
we'll be using their b20 usb type-c mic

00:00:34.000 --> 00:00:42.640
for our voice recordings today so sit back relax and enjoy the sound

00:00:40.640 --> 00:00:46.160
of bc building and look

00:00:43.680 --> 00:00:49.280
i brought some friends to help out hi guys hi

00:00:47.680 --> 00:00:54.039
hello hey hello let's get started

00:01:00.960 --> 00:01:05.840
we need our usual tools

00:01:04.080 --> 00:01:10.400
multi-bit screwdriver side cutters magnetic parts tray

00:01:08.560 --> 00:01:15.759
anti-aesthetic angle strap cable ties attach your anti-static strap

00:01:13.680 --> 00:01:19.680
to your ankle or wrist and then ground yourself to plugged in but powered off

00:01:17.920 --> 00:01:24.920
power supply be careful we don't want to shock any of

00:01:21.840 --> 00:01:24.920
our components

00:01:28.080 --> 00:01:35.200
we're going AMD and it all starts here with the ASUS prime b550 plus

00:01:33.360 --> 00:01:38.720
it's a great fit for your budget today while leaving space to upgrade when you

00:01:36.799 --> 00:01:43.680
feel like you're ready remove it from the box and place the motherboard on top

00:01:41.200 --> 00:01:50.079
of the box after you've removed all the extra contents like your i o shield

00:01:46.720 --> 00:01:52.079
SATA cable and m.2 screw the box is a

00:01:50.079 --> 00:01:56.399
perfect static safe workspace for pre-testing your hardware now get your

00:01:54.479 --> 00:01:59.920
board ready for the next step by lifting the latch on the CPU socket

00:02:00.880 --> 00:02:08.560
always open your CPU box carefully

00:02:04.880 --> 00:02:11.599
AMD's ryzen 5 3600 features six zen 2

00:02:08.560 --> 00:02:13.920
cores at up to 4.2 gigahertz boost and

00:02:11.599 --> 00:02:19.200
we'd hate for you to damage them for AMD cpus the lettering always matches right

00:02:16.640 --> 00:02:23.040
side up with the logo of the socket alternately you can match the golden

00:02:21.120 --> 00:02:27.680
triangle with your board to make sure it seats properly when you're ready

00:02:25.360 --> 00:02:30.400
gently press it into place give it a wiggle to make sure it went all the way

00:02:29.680 --> 00:02:35.200
in then close and lock the latch

00:02:32.879 --> 00:02:40.480
this last part can be a little scary but as long as you follow our instructions i

00:02:37.360 --> 00:02:40.480
promise it'll be okay

00:02:41.280 --> 00:02:48.080
to match our ryzen processor and to stay ready for potential future upgrades

00:02:45.280 --> 00:02:52.560
we're installing two ac sticks of 3600 megahertz cl16 memory

00:02:50.800 --> 00:02:57.840
it was only an additional ten dollars over the 3200 megahertz option and now

00:02:55.519 --> 00:03:02.560
RGB saved us a few dollars after all today is about sounding good

00:03:00.159 --> 00:03:08.400
rather than looking good open slots a2 and b2 on your motherboard

00:03:05.840 --> 00:03:12.640
remove the modules from their packaging line up the notch on the bottom of the

00:03:10.000 --> 00:03:15.920
module then slot them in gently but firmly until you hear a distinctive

00:03:14.879 --> 00:03:19.840
click oh that's nice

00:03:20.319 --> 00:03:28.000
severance one terabyte rocket NVMe SSD is a great value especially on sale

00:03:26.000 --> 00:03:33.440
and our two terabyte seagate hard drive is perfect for all the thick games we're

00:03:30.159 --> 00:03:35.680
gonna install we'll do the SSD now and

00:03:33.440 --> 00:03:39.280
the hard drive later find your m.2 standoff that we grabbed

00:03:37.599 --> 00:03:42.480
from our motherboard box and place it in the 80 millimeter slot

00:03:43.599 --> 00:03:50.720
then remove your drive from its packaging and gently slide the notch

00:03:46.879 --> 00:03:52.239
connection into the m.2 slot

00:03:50.720 --> 00:03:56.920
hold the end down and screw it in with this teeny tiny am not two screw

00:04:00.239 --> 00:04:06.080
our board comes with handy mounts for our cooler to latch onto but we're going

00:04:04.080 --> 00:04:09.040
to use the hyper 212 mounting hardware instead

00:04:07.280 --> 00:04:13.760
start by removing the back plate and standoffs by removing these four screws

00:04:11.519 --> 00:04:17.040
here here here and here then simply pull brackets from the back

00:04:15.840 --> 00:04:21.680
plate next remove our hyper 212 from its

00:04:19.440 --> 00:04:25.120
packaging and grab the required am4 hardware

00:04:22.720 --> 00:04:29.520
place the squared standoffs into the AMD holes like so then place the wider clips

00:04:28.080 --> 00:04:33.520
over top place the prepped back plate on the back

00:04:31.440 --> 00:04:38.320
of your board then screw on the standoffs to keep it in place

00:04:35.919 --> 00:04:42.240
now take the two am4 brackets and place them over the standoffs like so

00:04:40.400 --> 00:04:46.160
and fasten them down with the nuts making sure to keep the phillips pattern

00:04:44.000 --> 00:04:48.960
on top remove the fat and heat sink from the box

00:04:47.120 --> 00:04:52.960
peel the plastic off the bottom and remove the fan from the heatsink for

00:04:50.880 --> 00:04:56.960
easier installation squeeze a pea-sized drop of thermal

00:04:55.040 --> 00:05:02.080
paste onto the middle of the CPU heat spreader align your cooler so the screws line up

00:04:59.919 --> 00:05:07.199
with the brackets and screw them down until it's nice and snug

00:05:04.400 --> 00:05:10.880
there that's not going anywhere mount your fan by letting the clips rest

00:05:09.199 --> 00:05:16.080
along these sides here and connect your fan to the CPU header

00:05:13.039 --> 00:05:16.080
at the top of the board

00:05:17.360 --> 00:05:23.039
the phantex b series is a great budget option that still gives you everything

00:05:21.440 --> 00:05:27.840
you need in a case tempered glass side panel rubber

00:05:25.120 --> 00:05:32.720
grommets good air flow plenty of space to work in and great cable management

00:05:30.639 --> 00:05:37.440
you can save a bit of money by going with the last year's model like we did

00:05:34.800 --> 00:05:42.240
with our b400a digital open the top of the box flip it over and

00:05:40.160 --> 00:05:47.280
onto the floor or table whatever is easiest then slide

00:05:45.520 --> 00:05:52.720
the box off remove the extra protective packaging

00:05:49.520 --> 00:05:55.680
and stand your case upright remove the

00:05:52.720 --> 00:05:59.360
glass panel and side panel and place it back in the box for now so it's nice and

00:05:58.000 --> 00:06:03.120
safe the other side panel should be okay just

00:06:01.440 --> 00:06:07.199
about anywhere with the panels removed unstrap all the

00:06:05.440 --> 00:06:10.560
cables in the back and pull them out of the way for now then lay your case on

00:06:09.360 --> 00:06:14.400
its side our standoffs come pre-installed but if

00:06:12.639 --> 00:06:18.560
you're using a different case make sure to check the manual and put them in not

00:06:16.880 --> 00:06:22.479
too many though now before we forget

00:06:20.560 --> 00:06:26.880
install the i o shield by pressing firmly and clicking it into place

00:06:24.880 --> 00:06:31.039
this cannot be done later if you forget now unless you want to take your

00:06:28.639 --> 00:06:34.960
motherboard out of the case again grab your board and align it with the

00:06:32.479 --> 00:06:40.160
standoffs and the i o shield ensuring that no tabs are sticking into the ports

00:06:37.919 --> 00:06:43.280
once it's in place screw it down with these mounting screws

00:06:42.080 --> 00:06:47.280
great job we're really getting there

00:06:45.280 --> 00:06:53.440
take your hard drive from earlier and place it in one of the 3.5 inch bays at

00:06:49.759 --> 00:06:53.440
the bottom of the case like so

00:06:55.120 --> 00:07:00.160
our 650 watt modular power supply comes

00:06:58.240 --> 00:07:05.360
from evga the g6 80 plus gold

00:07:02.880 --> 00:07:09.840
you can save some money by going semi or non-modular but you could end up with

00:07:07.440 --> 00:07:13.759
some extra clutter open the box and take out your psu and

00:07:12.400 --> 00:07:21.599
its cables separate the atx 24 pin eps CPU eight

00:07:18.160 --> 00:07:22.960
pin PCIe eight bin and SATA power

00:07:21.599 --> 00:07:29.520
connectors plug these into the back your power supply don't force them

00:07:26.560 --> 00:07:33.199
these can only go into your unit one way so if there's too much resistance you

00:07:31.199 --> 00:07:38.319
might have done it backwards you silly goose with your cables attached slide the

00:07:36.080 --> 00:07:42.080
power supply in sideways and pull your cables out of the way

00:07:39.840 --> 00:07:47.280
take your four power supply screws and screw it in here here here

00:07:44.960 --> 00:07:49.599
and here bye

00:07:51.440 --> 00:07:59.360
let's start with our larger cables first shall we feed the atx 24 pin cable through the

00:07:56.400 --> 00:08:03.120
top rubber grommet and plug it in here remove any slack and stuff under the

00:08:01.120 --> 00:08:07.360
power supplies road good

00:08:04.400 --> 00:08:10.319
next let's grab our eight pin eps cable and wrote it through the top cutout near

00:08:09.039 --> 00:08:15.840
the plug this could take a little while but with some patience you'll get it through

00:08:14.639 --> 00:08:19.360
plug it in then work the cable along the top

00:08:17.919 --> 00:08:25.199
and down the side tucking it out of the way

00:08:21.919 --> 00:08:27.440
now route your PCIe eight pin cable

00:08:25.199 --> 00:08:32.479
through the rubber garment and leave it hanging roughly where your GPU will be

00:08:30.160 --> 00:08:35.839
graphics cards often get in the way so i'll put it in last and plug it in

00:08:34.880 --> 00:08:40.399
after now it's time to connect your case fans

00:08:38.560 --> 00:08:44.240
the best bet for an easy and clean look

00:08:41.839 --> 00:08:47.360
is to buy a three to one four pin fan splitter

00:08:45.519 --> 00:08:50.240
connect all three of the splitter and then connect the splitter to an

00:08:48.880 --> 00:08:55.600
extension and finally the extension to the chassis

00:08:52.640 --> 00:08:59.680
fan header on the bottom of the board this is a lot easier than water cooling

00:08:58.399 --> 00:09:05.680
but for tips on how to do your own hardline tubing make sure to get subscribed so you don't

00:09:03.040 --> 00:09:09.920
miss out on our beginner's guide while we're here

00:09:07.120 --> 00:09:15.120
let's plug in our hd audio cable here and our usb 3.0 cable here

00:09:13.200 --> 00:09:19.360
connect your front panel headers in the proper configuration like so

00:09:17.200 --> 00:09:23.440
and we're nearly done remember our hard drive

00:09:21.360 --> 00:09:27.760
it's time to connect the SATA power and SATA data cables to the back of it then

00:09:26.000 --> 00:09:32.480
route the data cable up through the bottom of the rubber grommet and into

00:09:29.920 --> 00:09:35.279
the one of the SATA parts make sure

00:09:33.519 --> 00:09:40.640
you put it in the middle or top slots though as the bottom one gets disabled

00:09:37.519 --> 00:09:42.480
when you're using the second m.2 slot

00:09:40.640 --> 00:09:49.519
and you may want to populate it down the line once everything is connected use ties or

00:09:46.240 --> 00:09:51.360
zip ties to strap down any stray cables

00:09:49.519 --> 00:09:54.560
trying to bundle them up for a cleaner look

00:09:52.880 --> 00:09:57.680
if you want to get lazy that's okay

00:09:56.240 --> 00:10:01.519
wiring mullets aren't the worst thing in the world as long as the front looks

00:09:59.600 --> 00:10:04.720
pretty we know these are hard to come by right

00:10:03.120 --> 00:10:10.079
now but if you can manage to get one anywhere close to msrp and rdx3060 is a

00:10:07.839 --> 00:10:14.480
fantastic choice for 1440p gaming with the ryzen 5 3600

00:10:12.640 --> 00:10:20.240
open the box remove the card from its esd bag and gently place it

00:10:17.839 --> 00:10:24.959
the two slot covers here and here as well as the adjustable cover on the side

00:10:23.040 --> 00:10:29.360
make sure the locking tab on the slot is open then grab the card and gently push

00:10:27.440 --> 00:10:32.560
it into the slot until you see the lock close

00:10:30.640 --> 00:10:36.720
it should make a little click replace the pci express slot cover

00:10:34.399 --> 00:10:41.600
screws to hold it in place reattach the adjustable piece then plug in that final

00:10:39.120 --> 00:10:45.040
loose pci express power cable now all that's left is to replace our

00:10:43.040 --> 00:10:48.720
panels connect our monitor mouse and keyboard and turn it on

00:10:47.519 --> 00:10:52.480
ah i love the sound of a successful first

00:10:51.120 --> 00:10:56.240
boot wasn't that easy

00:10:54.320 --> 00:11:00.160
are you as satisfied as i am of this beautiful new machine

00:10:58.160 --> 00:11:03.760
i hope you enjoy the clicks and words as it processes your ever desire

00:11:02.560 --> 00:11:08.399
listen to that um as the hard drives and fans power on

00:11:09.600 --> 00:11:15.120
exquisite if you like how my voice sounds now and

00:11:13.440 --> 00:11:19.200
throughout the video check out the new b20 from ebos

00:11:17.279 --> 00:11:23.839
we recorded every word on it using the cardioid pattern but as three others for

00:11:21.680 --> 00:11:28.800
all sorts of recording scenarios and you can tune the eq to your liking with

00:11:25.680 --> 00:11:29.760
their digital gaming suite software

00:11:28.800 --> 00:11:34.720
and hey for physical knobs on the device means you can change some settings without

00:11:33.279 --> 00:11:40.720
even looking that's handy if you're a streamer or creator looking

00:11:38.000 --> 00:11:44.800
for an alternative to existing usb mics look for it in the description below

00:11:42.880 --> 00:11:48.720
it features nordic design premium construction and the high quality audio

00:11:47.040 --> 00:11:53.680
you've been listening to for the past 10 minutes if you enjoyed listening today but want

00:11:51.200 --> 00:11:56.880
to go Intel over emt for your own rig check out our first person view build

00:11:55.279 --> 00:12:01.200
guide for tips on dealing with lga sockets it's 40 minutes long though so

00:11:59.519 --> 00:12:04.240
strap ins for a bit of a long ride