so today on my Vlog or video blog I will be unboxing the antech spot cool but
before I start I'd like to clarify something we are actually shooting this
episode with a different camera than normal we are shooting it with the Samsung f30 here so we're going to find
out how good the quality is compared to just my my power shot G7 which we
normally use to shoot these videos so the spat cool is basically for cooling a
spot so you choose a spot you cool it with this so what they want you to do is
you can pretty much Mount this anywhere in your case where there is a spot and
by spot I mean somewhere where there is a screw that you can hold it down with
so I'm going to show you what I mean in just a moment here first let's get this
unboxing kind of underway here so mounts on your motherboard or anywhere else
quite flexible okay yeah the packaging is really not very interesting so let's
get rid of that here is your instruction manual it comes in a conveniently sized
tiny piece of paper which we will unfold
to something hopefully a little bit bigger ah there we go so now we can
almost read it okay so step one connect the spot spot cool step two connect the
power connector step three adjust the speed fairly straightforward so step one
let's walk you through that so here's how the spot cool mounts and this is
actually really cool so you see this little hole down here basically anywhere
where there's a screw in your case so for example if you were to cool your RAM
you see this hole right here you can stick the spot cool right there put in
your normal motherboard screw and then the spot pool will be mounted just like
that you use the flexible ARM to just kind of adjust it I want it to blow down
on my RAM and you can kind of play around with it until you get it just
where you want it or you can adjust it okay I want it to blow on the back of my
video card you can actually move it around this way as well so you can be
like really really weird and flexible with it as much as you want it has four
blue LEDs on it so it actually kind of glows and looks pretty cool it has one
three pin connector so if I were for example using this to cool my RAM I'd
plug my 3pin connector in here just like that into any three pin fan header and
then I'd adjust it just like that now RAM doesn't need a whole lot of cooling
so that's where one of the other features comes in if I don't know if you
can see this the new camera may or may not be that great but it's a lmh so low
medium highspeed settings for the fan so you'd actually probably set it to low so
you just get a little bit of air flow wherever you need it so you can also
mount it onto the PCI brackets above your cards so you could mount it kind of
right here you screw in your card and then you point it down at whatever needs
extra cooling anyway that's the antech spot cool thank you for checking out my
video blog on the antech spot cool