WEBVTT

00:00:00.560 --> 00:00:07.839
so I had said I might be doing a follow-up video on the Spitfire 6 uh

00:00:05.520 --> 00:00:11.200
graphics card cooler from thermal right and here it is so I've actually

00:00:09.440 --> 00:00:16.680
installed the thermal right fan that they've given to me along with it this

00:00:12.639 --> 00:00:19.279
is a 140 mm fan and I just want to I

00:00:16.680 --> 00:00:24.840
just want to demonstrate the ludicrous size of this cooler setup I mean I love

00:00:21.960 --> 00:00:31.279
it it's terrific but uh so this is a Radeon 5850 ifinity 6 Edition so I don't

00:00:29.199 --> 00:00:35.920
think thermal r even knew this yet but it actually fits it's completely 100%

00:00:33.800 --> 00:00:40.000
compatible with this special card right out of the box so let's uh let's go over

00:00:38.320 --> 00:00:44.280
the installation procedure that I used really quickly here it's not nearly as

00:00:42.320 --> 00:00:48.640
complicated as it looked when I was unboxing it I I thought there were all

00:00:46.239 --> 00:00:52.600
these screws and brackets and all this stuff and I was like oh this is pretty

00:00:50.520 --> 00:00:57.600
confusing but actually it's really simple so the first thing I did was I

00:00:54.559 --> 00:01:01.039
installed the vrm cooler so all that was

00:00:57.600 --> 00:01:03.480
was one strip of thermal comp of thermal

00:01:01.039 --> 00:01:06.680
interface material so that's under there and then you just put it up against the

00:01:05.159 --> 00:01:11.040
uh the voltage regulators and you put in two thumb screws with plastic washers

00:01:08.640 --> 00:01:16.200
from the back that's it that simple to install that piece the next piece that I

00:01:13.280 --> 00:01:22.159
installed was all of the RAM coolers so thermalite includes an abundance of RAM

00:01:19.000 --> 00:01:24.439
chip heat sinks so I actually used 12 of

00:01:22.159 --> 00:01:29.960
these so I used all of the regular sized ones but they also included several long

00:01:26.960 --> 00:01:32.600
skinny ones as well as eight or maybe

00:01:29.960 --> 00:01:37.520
get six but it's a few of the ones that are low profile so I installed four low

00:01:35.479 --> 00:01:40.280
profile ones down here and then I have another four over here now something you

00:01:39.159 --> 00:01:47.240
want to make sure you're doing when you're installing any aftermarket cooling on a video card is use isopropyl

00:01:45.200 --> 00:01:50.920
alcohol to clean off all the memory chips before you try to stick these ones

00:01:49.520 --> 00:01:54.759
to it because otherwise you're going to ruin the thermal pads that are included

00:01:53.200 --> 00:01:59.280
on the thermal right ones and I should also mention that the thermal tape that

00:01:56.880 --> 00:02:04.000
they're using is excellent I did not have any difficulties with these falling

00:02:01.399 --> 00:02:08.520
off after I applied them and I have run into that before in the past so the next

00:02:06.240 --> 00:02:12.640
piece that I installed was just the uh this is a hold down plate right here

00:02:10.479 --> 00:02:16.760
that goes over top of the GPU cooler itself now you can install this both

00:02:14.760 --> 00:02:20.800
ways it is symmetrical if you check out my unboxing you can see that both of

00:02:18.440 --> 00:02:25.480
these surfaces are laps flat so you can make it so that when the card is

00:02:22.120 --> 00:02:30.680
installed the cooler either uh Towers up

00:02:25.480 --> 00:02:32.519
and up towards the CPU or it can go down

00:02:30.680 --> 00:02:36.360
towards the other expansion cards and then it actually doubles as a cooler for

00:02:34.280 --> 00:02:39.640
all your expansion cards because you can have the fan blowing down onto all of

00:02:38.040 --> 00:02:43.480
your other expansion cards as well so that's kind of a a neat perk to

00:02:41.560 --> 00:02:49.920
installing this so basically you put the hold down over top you put these little

00:02:46.760 --> 00:02:53.319
thumb screws through and then on the

00:02:49.920 --> 00:02:55.800
back you just put a washer a rubber

00:02:53.319 --> 00:02:59.800
washer a back plate and then one more thumb nut that was it that was the whole

00:02:57.879 --> 00:03:05.760
installation procedure and once it's in stalled it looks just like ridiculously

00:03:02.720 --> 00:03:08.519
massive I love it because it's like the

00:03:05.760 --> 00:03:12.200
size of the video card itself and I oh I wish I had the stock cooler here just

00:03:09.959 --> 00:03:17.519
for a quick comparison but the stock cooler just kind of is you know this

00:03:14.840 --> 00:03:21.239
size and then this thing is like a huge one other benefit actually that I should

00:03:19.519 --> 00:03:27.200
mention is that assuming you're not using an Infinity 6 Edition card and you

00:03:23.599 --> 00:03:28.920
can actually get a single slot P or uh

00:03:27.200 --> 00:03:34.280
if you want were able to get a single slot PCI bracket thermalite has actually

00:03:31.560 --> 00:03:38.840
engineered this cooler so that all of the things that are on the surface of

00:03:35.879 --> 00:03:42.680
the card are only single slot width so if if you got rid of this you could

00:03:40.519 --> 00:03:47.959
actually install some other expansion card right next to your 5870 even though

00:03:45.799 --> 00:03:52.920
with the default cooler it is a dual slot card so thank you for checking out

00:03:50.080 --> 00:03:58.239
my quick video on the installed Spitfire 6 and Radeon ifinity 6 Edition